- Bore d
- 28.575 mm
- Outside D
- 73.025 mm
- Dynamic C
- 60 kN
- Static C0
- 67 kN
- Limit speed
- 9500 r/min
- Mass
- 0.48 kg
Manufacturer catalogue
25926 PRODUCTS
SKF
Search SKF products by designation, product type and boundary dimensions. Technical values are organized for direct comparison.
Customer bearing search
Find an SKF bearing
Search by designation, category or exact boundary dimensions.
Product families
SKF bearing families
Start with an official product family, then refine by construction and technical attributes.
All bearing categories →
- Bore d
- 8 mm
- Outside D
- 22 mm
- Width B
- 7 mm
- Dynamic C
- 2.65 kN
- Static C0
- 0.56 kN
- Limit speed
- 40000 r/min
- Mass
- 0.0123 kg
- Mass
- 0.18 kg
- Bore d
- 30 mm
- Outside D
- 62 mm
- Width B
- 48 mm
- Dynamic C
- 15.6 kN
- Static C0
- 4.65 kN
- Limit speed
- 6700 r/min
- Mass
- 0.35 kg
- Bore d
- 35 mm
- Outside D
- 72 mm
- Width B
- 52 mm
- Dynamic C
- 19 kN
- Static C0
- 6 kN
- Limit speed
- 5600 r/min
- Mass
- 0.54 kg
- Bore d
- 40 mm
- Outside D
- 80 mm
- Width B
- 56 mm
- Dynamic C
- 19 kN
- Static C0
- 6.55 kN
- Limit speed
- 5000 r/min
- Mass
- 0.691 kg
- Bore d
- 45 mm
- Outside D
- 85 mm
- Width B
- 58 mm
- Dynamic C
- 22.9 kN
- Static C0
- 7.8 kN
- Limit speed
- 4500 r/min
- Mass
- 0.77 kg
- Bore d
- 50 mm
- Outside D
- 90 mm
- Width B
- 58 mm
- Dynamic C
- 26.5 kN
- Static C0
- 9.15 kN
- Limit speed
- 4300 r/min
- Mass
- 0.844 kg
- Bore d
- 60 mm
- Outside D
- 110 mm
- Width B
- 62 mm
- Dynamic C
- 31.2 kN
- Static C0
- 12.2 kN
- Limit speed
- 3400 r/min
- Mass
- 1.45 kg
- Bore d
- 15.875 mm
- Outside D
- 42.862 mm
- Dynamic C
- 21.5 kN
- Static C0
- 17.6 kN
- Limit speed
- 17000 r/min
- Mass
- 0.098 kg
- Bore d
- 10 mm
- Outside D
- 30 mm
- Width B
- 9 mm
- Dynamic C
- 5.53 kN
- Static C0
- 1.18 kN
- Limit speed
- 36000 r/min
- Mass
- 0.0326 kg
- Bore d
- 12 mm
- Outside D
- 32 mm
- Width B
- 10 mm
- Dynamic C
- 6.24 kN
- Static C0
- 1.43 kN
- Limit speed
- 32000 r/min
- Mass
- 0.0383 kg
- Bore d
- 15 mm
- Outside D
- 35 mm
- Width B
- 11 mm
- Dynamic C
- 7.41 kN
- Static C0
- 1.76 kN
- Limit speed
- 28000 r/min
- Mass
- 0.05 kg
- Bore d
- 15 mm
- Outside D
- 35 mm
- Width B
- 11 mm
- Dynamic C
- 7.41 kN
- Static C0
- 1.76 kN
- Limit speed
- 28000 r/min
- Mass
- 0.049 kg
- Bore d
- 17 mm
- Outside D
- 40 mm
- Width B
- 12 mm
- Dynamic C
- 8.84 kN
- Static C0
- 2.2 kN
- Limit speed
- 24000 r/min
- Mass
- 0.067 kg
- Bore d
- 17 mm
- Outside D
- 40 mm
- Width B
- 12 mm
- Dynamic C
- 8.84 kN
- Static C0
- 2.2 kN
- Limit speed
- 24000 r/min
- Mass
- 0.073 kg
- Bore d
- 20 mm
- Outside D
- 47 mm
- Width B
- 14 mm
- Dynamic C
- 12.7 kN
- Static C0
- 3.4 kN
- Limit speed
- 20000 r/min
- Mass
- 0.105 kg
- Bore d
- 20 mm
- Outside D
- 47 mm
- Width B
- 14 mm
- Dynamic C
- 12.7 kN
- Static C0
- 3.4 kN
- Limit speed
- 20000 r/min
- Mass
- 0.111 kg
- Bore d
- 20 mm
- Outside D
- 47 mm
- Width B
- 14 mm
- Dynamic C
- 12.7 kN
- Static C0
- 3.4 kN
- Limit speed
- 20000 r/min
- Mass
- 0.111 kg
- Bore d
- 25 mm
- Outside D
- 52 mm
- Width B
- 15 mm
- Dynamic C
- 14.3 kN
- Static C0
- 4 kN
- Limit speed
- 18000 r/min
- Mass
- 0.13 kg
- Bore d
- 25 mm
- Outside D
- 52 mm
- Width B
- 15 mm
- Dynamic C
- 14.3 kN
- Static C0
- 4 kN
- Limit speed
- 18000 r/min
- Mass
- 0.133 kg
- Bore d
- 25 mm
- Outside D
- 52 mm
- Width B
- 15 mm
- Dynamic C
- 14.3 kN
- Static C0
- 4 kN
- Limit speed
- 18000 r/min
- Mass
- 0.155 kg
- Bore d
- 25 mm
- Outside D
- 52 mm
- Width B
- 15 mm
- Dynamic C
- 14.3 kN
- Static C0
- 4 kN
- Limit speed
- 18000 r/min
- Mass
- 0.136 kg
- Bore d
- 25 mm
- Outside D
- 52 mm
- Width B
- 15 mm
- Dynamic C
- 14.3 kN
- Static C0
- 4 kN
- Limit speed
- 18000 r/min
- Mass
- 0.14 kg
Independent brand reference
Return to results ↑SKF bearings: identification, catalogue & comparison
SKF is a bearing and rotating-equipment manufacturer. Its range includes bearings and units, seals and lubrication products. BearingScope is an independent reference site: this page is not SKF's official website, a distributor listing or an inventory offer.
SKF bearing types & model examples
Start with the bearing's construction, not just its diameter or brand. These source-backed examples connect a bearing type to actual SKF designations and recorded dimensions. They are lookup starting points, not a recommendation for an unspecified machine or a complete current catalogue.
SKF Angular contact ball bearings3 model examples
Contact angle, row count and pairing determine axial load direction and stiffness.
Before selecting a model
- Compare contact angle, matched-set designation, preload, accuracy and back-to-back or face-to-face arrangement.
7205 BEP
Single row angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
7206 BEP
Single row angular contact ball bearing
- Bore diameter (d)
- 30 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 16 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
7005/VA9D1
Super-precision universally matchable single row angular contact ball bearing for driven tools
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 47 mm
- Width (B)
- 12 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: Contact angle, row count, matching and preload are part of the arrangement, not resolved by the nominal envelope. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Double row angular contact ball bearings3 model examples
Contact angle, row count and pairing determine axial load direction and stiffness. The examples in this section explicitly record double row construction; the qualifier is not inferred from the base number.
Before selecting a model
- Retain the double row construction when narrowing candidates; similarly sized models with a different arrangement are outside this section.
- Compare contact angle, matched-set designation, preload, accuracy and back-to-back or face-to-face arrangement.
3205 A
Double row angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 20.6 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
3305 A
Double row angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 25.4 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
3204 A
Double row angular contact ball bearing
- Bore diameter (d)
- 20 mm
- Outside diameter (D)
- 47 mm
- Width (B)
- 20.6 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: Contact angle, row count, matching and preload are part of the arrangement, not resolved by the nominal envelope. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Ball bearings3 model examples
Ball bearings are a group of constructions, not one interchangeable design. Deep-groove, angular-contact and self-aligning bearings serve different arrangements; the exact type remains part of the lookup.
Before selecting a model
- Identify whether the arrangement uses deep-groove, angular-contact or self-aligning construction.
- Check the full marking, dimensions, closure and internal clearance on the individual record.
- Use the row count and mounting arrangement from the exact model; do not infer them from the word ball.
6205
Deep groove ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
6305 N
Deep groove ball bearing with snap ring groove
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 17 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
6005-Z
Deep groove ball bearing with seals or shields
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 47 mm
- Width (B)
- 12 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: The group name alone does not determine load direction, speed, accuracy or installation requirements. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Explore bearing constructions →SKF Double row ball bearings3 model examples
Ball bearings are a group of constructions, not one interchangeable design. Deep-groove, angular-contact and self-aligning bearings serve different arrangements; the exact type remains part of the lookup. The examples in this section explicitly record double row construction; the qualifier is not inferred from the base number.
Before selecting a model
- Retain the double row construction when narrowing candidates; similarly sized models with a different arrangement are outside this section.
- Identify whether the arrangement uses deep-groove, angular-contact or self-aligning construction.
- Check the full marking, dimensions, closure and internal clearance on the individual record.
- Use the row count and mounting arrangement from the exact model; do not infer them from the word ball.
3205 A
Double row angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 20.6 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
3305 A-2Z
Double row angular contact ball bearing with seals or shields
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 25.4 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
4200 ATN9
Double row deep groove ball bearing
- Bore diameter (d)
- 10 mm
- Outside diameter (D)
- 30 mm
- Width (B)
- 14 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: The group name alone does not determine load direction, speed, accuracy or installation requirements. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Explore bearing constructions →SKF Single row ball bearings3 model examples
Ball bearings are a group of constructions, not one interchangeable design. Deep-groove, angular-contact and self-aligning bearings serve different arrangements; the exact type remains part of the lookup. The examples in this section explicitly record single row construction; the qualifier is not inferred from the base number.
Before selecting a model
- Retain the single row construction when narrowing candidates; similarly sized models with a different arrangement are outside this section.
- Identify whether the arrangement uses deep-groove, angular-contact or self-aligning construction.
- Check the full marking, dimensions, closure and internal clearance on the individual record.
- Use the row count and mounting arrangement from the exact model; do not infer them from the word ball.
7205 BEP
Single row angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
7206 ACCBM
Single row angular contact ball bearing with 25° contact angle
- Bore diameter (d)
- 30 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 16 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
7005 CD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 47 mm
- Width (B)
- 12 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: The group name alone does not determine load direction, speed, accuracy or installation requirements. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Explore bearing constructions →SKF Cylindrical roller bearings3 model examples
Rib arrangement determines axial location: NU, N, NJ and NUP are not functionally identical.
Before selecting a model
- Check locating role, axial displacement, cage or full complement, minimum load and lubrication.
NU 205 ECP
Single row cylindrical roller bearing, NU design
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
NJ 205 ECJ
Single row cylindrical roller bearing, NJ design
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
NU 2205 ECP
Single row cylindrical roller bearing, NU design
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: NU, N, NJ and NUP arrangements are not interchangeable solely because their envelope dimensions match. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Deep groove ball bearings3 model examples
A versatile radial bearing family with some axial-load capability; single and double rows differ.
Before selecting a model
- Match envelope, load ratings, closure, clearance, cage, tolerance class and lubrication.
6205
Deep groove ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
6305
Deep groove ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 17 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
6005
Deep groove ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 47 mm
- Width (B)
- 12 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: Open, shielded and sealed variants may share dimensions while closure, grease or clearance differs. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Needle roller bearings3 model examples
Small-diameter rollers provide a compact radial section; some designs run directly on a prepared shaft.
Before selecting a model
- Specify with or without an inner ring, shaft hardness and finish, cage, seals and axial location.
NA 4905
Single row needle roller bearing with machined rings, with flanges
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 42 mm
- Width (B)
- 17 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
NKI 25/30
Single row needle roller bearing with machined rings, with flanges
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 38 mm
- Width (B)
- 30 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
NA 4822
Single row needle roller bearing with machined rings, with flanges
- Bore diameter (d)
- 110 mm
- Outside diameter (D)
- 140 mm
- Width (B)
- 30 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: Confirm whether an inner ring is supplied; an Fw value is not automatically a shaft bore d. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Roller bearings3 model examples
Roller-bearing searches include cylindrical, spherical, tapered and needle constructions. Start by identifying the roller geometry and whether the record describes a complete bearing or a component.
Before selecting a model
- Distinguish a tapered bore from tapered rollers: they describe different features.
- Check separable components, ring arrangement and the source dimension symbols.
- Verify the individual load direction, mounting and lubrication requirements before comparing models.
NU 205 ECP
Single row cylindrical roller bearing, NU design
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
NJ 205 ECJ
Single row cylindrical roller bearing, NJ design
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
22205 E
Spherical roller bearing with relubrication features
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: The group name alone does not determine load direction, speed, accuracy or installation requirements. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Explore bearing constructions →SKF Self-aligning ball bearings3 model examples
Two ball rows and a spherical outer raceway accommodate limited shaft-to-housing misalignment.
Before selecting a model
- Check permissible misalignment, radial load, available axial capacity, bore form and mounting sleeve.
1205 EM
Self-aligning ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
2205 ETN9
Self-aligning ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
1215
Self-aligning ball bearing
- Bore diameter (d)
- 75 mm
- Outside diameter (D)
- 130 mm
- Width (B)
- 25 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: A tapered bore may require an appropriate sleeve and mounting procedure; misalignment capability is model-specific. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Spherical roller bearings3 model examples
Self-aligning roller designs support substantial radial load and, depending on design, axial load.
Before selecting a model
- Check cylindrical versus tapered bore, clearance reduction during mounting, permissible misalignment and cage.
22205 E
Spherical roller bearing with relubrication features
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
22210 E
Spherical roller bearing with relubrication features
- Bore diameter (d)
- 50 mm
- Outside diameter (D)
- 90 mm
- Width (B)
- 23 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
22310 E
Spherical roller bearing with relubrication features
- Bore diameter (d)
- 50 mm
- Outside diameter (D)
- 110 mm
- Width (B)
- 40 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: Check straight versus tapered bore, cage and mounting arrangement. A tapered bore does not make this a tapered roller bearing. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →SKF Tapered roller bearings3 model examples
Cone and cup geometry determines the assembly; single-row bearings normally work in opposed arrangements.
Before selecting a model
- Check the complete cup-and-cone pairing, assembly width T, contact angle, endplay or preload and load direction.
331656
Double row tapered roller bearing, TDO design
- Bore diameter (d)
- 415.925 mm
- Outside diameter (D)
- 590.55 mm
- Total width (T)
- 244.475 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
331657
Double row tapered roller bearing, TDO design
- Bore diameter (d)
- 479.425 mm
- Outside diameter (D)
- 679.45 mm
- Total width (T)
- 276.225 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
331945
Double row tapered roller bearing, TDO design
- Bore diameter (d)
- 228.6 mm
- Outside diameter (D)
- 488.95 mm
- Total width (T)
- 254 mm
Source basis: SKF published catalogue record. Captured 2026-09-02.
Comparison boundary: Cup and cone references, assembled width, contact geometry and setting must be checked as one arrangement. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →Dimensions retain their source labels: B is not automatically the same as assembly width T, ring width C or section height H. A component with no inner ring may specify Fw rather than a shaft bore d. These examples do not supply installation fits, approval for a machine, or a promised load/speed capability.
What to identify first
Start with the complete SKF marking, not just a familiar base number. A deep-groove bearing, a spherical roller bearing and a bearing unit use different installation dimensions even if they have the same shaft diameter.
25,926 records currently loaded here. This is BearingScope's coverage, not the manufacturer's entire catalogue. A missing result means a data gap in this website, not that the manufacturer has never made the product.
Find the correct catalogue record
The SKF product family and full designation are the keys to the correct data sheet. A general SKF catalogue or maintenance handbook is useful for interpreting terms, but a value from a different size or seal variant is not a substitute for the exact record.
Use the designation field above for the full marking, or enter bore d, outside diameter D and width B in mm. Leave unknown fields blank. A size chart can find candidates; it cannot establish material, precision or assembly compatibility by itself.
Read the SKF designation in context
These are interpretation notes, not a universal suffix crosswalk. Preserve every unrecognised code for exact-model verification.
| Marking or field | Meaning and limits |
|---|---|
| Base designation | Use the base to discover related variants; keep the exact prefix, spaces and suffixes in the record you compare. |
| Sealing | For the applicable deep-groove families, 2Z identifies shields on both sides; 2RS1 and 2RSH identify their respective contact-seal designs on both sides. |
| Internal clearance | C3 identifies a clearance group above Normal. It is not an ABEC accuracy grade and does not specify a shaft fit. |
| Complete record | Check dimensions, load-rating basis, speed conditions, cage, grease and precision rather than assuming that one suffix describes the whole bearing. |
SKF designation versus an automotive kit number
A vehicle kit identifier can describe more than a loose rolling bearing. Keep kit contents, axle position, sensor features and vehicle identification separate from an industrial bearing's d×D×B. A catalogue dimension match here is not vehicle-fitment approval.
Compare SKF with another brand
- Start with the complete designation and supplied component or assembly.
- Compare d×D×B in the same units; for separable bearings include the correct component and assembled dimensions.
- Check closure, clearance, cage, precision, material and lubrication. A blank field remains unknown.
- Compare load and speed figures on the same basis, then check the application's mounting and operating requirements.
Equal boundary dimensions identify a candidate, not an approved replacement. BearingScope does not rank whole brands or certify fitment.
SKF bearing lookup questions
Is this the official SKF catalogue or a shop?
No. BearingScope is an independent lookup and comparison reference. It does not sell bearings, quote prices, certify authenticity or claim to contain the manufacturer's complete current range.
Can I search by inside and outside diameter?
Yes, where corresponding product data is loaded. Enter known dimensions in mm in the search controls above. Add width and family to narrow the result. Measure the loose bearing's boundary dimensions, not a housing's mounting-bolt spacing. Keep uncertain readings separate from exact measurements.
Does a catalogue number prove that the bearing is genuine?
No. A plausible marking or a matching database record does not authenticate a physical item. Retain the full marking, packaging and lot identification for the manufacturer's verification process; neither a photograph nor a country name alone settles authenticity.
Where was my SKF bearing made?
The site does not have a verified factory/lot register. Brand identity and catalogue dimensions cannot establish an individual bearing's manufacturing origin. Check that item's traceability documentation; the missing origin is not filled from another model.
Can I download every SKF PDF or CAD drawing here?
No. Public lookup records and explanatory guides are not a complete document library. A drawing must match the exact model and revision and be permitted for redistribution. Where no such file is provided, the document request remains a data gap.
What if the full suffix gives no result?
Check the lettering, separators and component identity first. You may use the base number to discover related records, but do not remove the suffix from the part you ultimately compare. Record the missing full designation through the site's data-feedback page.
Editorial reference reviewed 2026-10-01. Source basis: SKF Group company overview; SKF Bearing Maintenance Handbook — clearance terminology; SKF Bearings and Mounted Products 2018 — sealing designations; SKF Automotive — product scope. Original explanatory text; no catalogue prose, PDF or CAD is represented as a BearingScope manufacturer document.