- Bore d
- 8 mm
- Outside D
- 22 mm
- Width B
- 7 mm
- Dynamic C
- 2.75 kN
- Static C0
- 0.56 kN
- Limit speed
- 39000 r/min
- Mass
- 0.014 kg
Manufacturer catalogue
25142 PRODUCTS
FAG
Search FAG products by designation, product type and boundary dimensions. Technical values are organized for direct comparison.
Customer bearing search
Find an FAG bearing
Search by designation, category or exact boundary dimensions.
Product families
FAG bearing families
Start with an official product family, then refine by construction and technical attributes.
All bearing categories →
- Bore d
- 20 mm
- Outside D
- 47 mm
- Width B
- 40 mm
- Dynamic C
- 10.1 kN
- Static C0
- 2.6 kN
- Limit speed
- 18100 r/min
- Mass
- 0.186 kg
- Bore d
- 25 mm
- Outside D
- 52 mm
- Width B
- 44 mm
- Dynamic C
- 12.3 kN
- Static C0
- 3.3 kN
- Limit speed
- 15500 r/min
- Mass
- 0.221 kg
- Bore d
- 30 mm
- Outside D
- 62 mm
- Width B
- 48 mm
- Dynamic C
- 15.9 kN
- Static C0
- 4.65 kN
- Limit speed
- 13100 r/min
- Mass
- 0.37 kg
- Bore d
- 35 mm
- Outside D
- 72 mm
- Width B
- 52 mm
- Dynamic C
- 16 kN
- Static C0
- 5.1 kN
- Limit speed
- 11600 r/min
- Mass
- 0.54 kg
- Bore d
- 40 mm
- Outside D
- 80 mm
- Width B
- 56 mm
- Dynamic C
- 19.4 kN
- Static C0
- 6.5 kN
- Limit speed
- 10100 r/min
- Mass
- 0.736 kg
- Bore d
- 45 mm
- Outside D
- 85 mm
- Width B
- 58 mm
- Dynamic C
- 22 kN
- Static C0
- 7.3 kN
- Limit speed
- 9300 r/min
- Mass
- 0.788 kg
- Bore d
- 50 mm
- Outside D
- 90 mm
- Width B
- 58 mm
- Dynamic C
- 22.9 kN
- Static C0
- 8.1 kN
- Limit speed
- 8700 r/min
- Mass
- 0.85 kg
- Bore d
- 60 mm
- Outside D
- 110 mm
- Width B
- 62 mm
- Dynamic C
- 30.5 kN
- Static C0
- 11.5 kN
- Limit speed
- 6900 r/min
- Mass
- 1.54 kg
- Bore d
- 10 mm
- Outside D
- 30 mm
- Width B
- 9 mm
- Dynamic C
- 5.7 kN
- Static C0
- 1.19 kN
- Limit speed
- 29500 r/min
- Mass
- 0.033 kg
- Bore d
- 10 mm
- Outside D
- 30 mm
- Width B
- 9 mm
- Dynamic C
- 5.7 kN
- Static C0
- 1.19 kN
- Limit speed
- 29500 r/min
- Mass
- 0.033 kg
- Bore d
- 12 mm
- Outside D
- 32 mm
- Width B
- 10 mm
- Dynamic C
- 5.7 kN
- Static C0
- 1.27 kN
- Limit speed
- 28000 r/min
- Mass
- 0.04 kg
- Bore d
- 12 mm
- Outside D
- 32 mm
- Width B
- 10 mm
- Dynamic C
- 5.7 kN
- Static C0
- 1.27 kN
- Limit speed
- 28000 r/min
- Mass
- 0.04 kg
- Bore d
- 12 mm
- Outside D
- 32 mm
- Width B
- 10 mm
- Dynamic C
- 5.7 kN
- Static C0
- 1.27 kN
- Limit speed
- 28000 r/min
- Mass
- 0.04 kg
- Bore d
- 12 mm
- Outside D
- 32 mm
- Width B
- 10 mm
- Dynamic C
- 5.7 kN
- Static C0
- 1.27 kN
- Limit speed
- 28000 r/min
- Mass
- 0.04 kg
- Bore d
- 15 mm
- Outside D
- 35 mm
- Width B
- 11 mm
- Dynamic C
- 7.7 kN
- Static C0
- 1.75 kN
- Limit speed
- 23800 r/min
- Mass
- 0.047 kg
- Bore d
- 15 mm
- Outside D
- 35 mm
- Width B
- 11 mm
- Dynamic C
- 7.7 kN
- Static C0
- 1.75 kN
- Limit speed
- 23800 r/min
- Mass
- 0.047 kg
- Bore d
- 15 mm
- Outside D
- 35 mm
- Width B
- 11 mm
- Dynamic C
- 7.7 kN
- Static C0
- 1.75 kN
- Limit speed
- 23800 r/min
- Mass
- 0.047 kg
- Bore d
- 15 mm
- Outside D
- 35 mm
- Width B
- 11 mm
- Dynamic C
- 7.7 kN
- Static C0
- 1.75 kN
- Limit speed
- 23800 r/min
- Mass
- 0.047 kg
- Bore d
- 17 mm
- Outside D
- 40 mm
- Width B
- 12 mm
- Dynamic C
- 8.1 kN
- Static C0
- 2.01 kN
- Limit speed
- 21800 r/min
- Mass
- 0.073 kg
- Bore d
- 17 mm
- Outside D
- 40 mm
- Width B
- 12 mm
- Dynamic C
- 8.1 kN
- Static C0
- 2.01 kN
- Limit speed
- 21800 r/min
- Mass
- 0.073 kg
- Bore d
- 17 mm
- Outside D
- 40 mm
- Width B
- 12 mm
- Dynamic C
- 8.1 kN
- Static C0
- 2.01 kN
- Limit speed
- 21800 r/min
- Mass
- 0.073 kg
- Bore d
- 17 mm
- Outside D
- 40 mm
- Width B
- 12 mm
- Dynamic C
- 8.1 kN
- Static C0
- 2.01 kN
- Limit speed
- 21800 r/min
- Mass
- 0.073 kg
- Bore d
- 20 mm
- Outside D
- 47 mm
- Width B
- 14 mm
- Dynamic C
- 10.1 kN
- Static C0
- 2.6 kN
- Limit speed
- 18100 r/min
- Mass
- 0.116 kg
Independent brand reference
Return to results ↑FAG bearings: identification, catalogue & comparison
FAG is a Schaeffler bearing brand. Schaeffler's medias catalogue brings together rolling bearings, plain bearings and linear systems, including INA and FAG products. Keep FAG as the brand on a FAG-marked record; common group ownership does not make every INA and FAG part identical.
FAG bearing types & model examples
Start with the bearing's construction, not just its diameter or brand. These source-backed examples connect a bearing type to actual FAG designations and recorded dimensions. They are lookup starting points, not a recommendation for an unspecified machine or a complete current catalogue.
FAG Angular contact ball bearings3 model examples
Contact angle, row count and pairing determine axial load direction and stiffness.
Before selecting a model
- Compare contact angle, matched-set designation, preload, accuracy and back-to-back or face-to-face arrangement.
7205-B-XL-JP
Angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
7206-B-XL-JP
Angular contact ball bearing
- Bore diameter (d)
- 30 mm
- Outside diameter (D)
- 62 mm
- Width (B)
- 16 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
7005-B-XL-TVP
Angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 47 mm
- Width (B)
- 12 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: Contact angle, row count, matching and preload are part of the arrangement, not resolved by the nominal envelope. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →FAG Ball bearings3 model examples
Ball bearings are a group of constructions, not one interchangeable design. Deep-groove, angular-contact and self-aligning bearings serve different arrangements; the exact type remains part of the lookup.
Before selecting a model
- Identify whether the arrangement uses deep-groove, angular-contact or self-aligning construction.
- Check the full marking, dimensions, closure and internal clearance on the individual record.
- Use the row count and mounting arrangement from the exact model; do not infer them from the word ball.
608-HLN
Deep groove ball bearing
- Bore diameter (d)
- 8 mm
- Outside diameter (D)
- 22 mm
- Width (B)
- 7 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
7205-B-XL-JP
Angular contact ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
1205-TVH
Self-aligning ball bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: The group name alone does not determine load direction, speed, accuracy or installation requirements. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Explore bearing constructions →FAG Cylindrical roller bearings3 model examples
Rib arrangement determines axial location: NU, N, NJ and NUP are not functionally identical.
Before selecting a model
- Check locating role, axial displacement, cage or full complement, minimum load and lubrication.
NU205-E-XL-M1
Cylindrical roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
NJ205-E-XL-TVP2
Cylindrical roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
NU2205-E-XL-M1
Cylindrical roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: NU, N, NJ and NUP arrangements are not interchangeable solely because their envelope dimensions match. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →FAG Deep groove ball bearings3 model examples
A versatile radial bearing family with some axial-load capability; single and double rows differ.
Before selecting a model
- Match envelope, load ratings, closure, clearance, cage, tolerance class and lubrication.
608-HLN
Deep groove ball bearing
- Bore diameter (d)
- 8 mm
- Outside diameter (D)
- 22 mm
- Width (B)
- 7 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
6003
Deep groove ball bearing
- Bore diameter (d)
- 17 mm
- Outside diameter (D)
- 35 mm
- Width (B)
- 10 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
6008
Deep groove ball bearing
- Bore diameter (d)
- 40 mm
- Outside diameter (D)
- 68 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: Open, shielded and sealed variants may share dimensions while closure, grease or clearance differs. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →FAG Roller bearings3 model examples
Roller-bearing searches include cylindrical, spherical, tapered and needle constructions. Start by identifying the roller geometry and whether the record describes a complete bearing or a component.
Before selecting a model
- Distinguish a tapered bore from tapered rollers: they describe different features.
- Check separable components, ring arrangement and the source dimension symbols.
- Verify the individual load direction, mounting and lubrication requirements before comparing models.
NU205-E-XL-M1
Cylindrical roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
22205-E1-XL
Spherical Roller Bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
30205-A
Tapered roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width, inner ring (B)
- 15 mm
- Width, outer ring (C)
- 13 mm
- Width, total (T)
- 16.25 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: The group name alone does not determine load direction, speed, accuracy or installation requirements. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Explore bearing constructions →FAG Spherical roller bearings3 model examples
Self-aligning roller designs support substantial radial load and, depending on design, axial load.
Before selecting a model
- Check cylindrical versus tapered bore, clearance reduction during mounting, permissible misalignment and cage.
22205-E1-XL
Spherical Roller Bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width (B)
- 18 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
22210-E1-XL
Spherical Roller Bearing
- Bore diameter (d)
- 50 mm
- Outside diameter (D)
- 90 mm
- Width (B)
- 23 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
22310-E1-XL
Spherical Roller Bearing
- Bore diameter (d)
- 50 mm
- Outside diameter (D)
- 110 mm
- Width (B)
- 40 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: Check straight versus tapered bore, cage and mounting arrangement. A tapered bore does not make this a tapered roller bearing. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →FAG Tapered roller bearings3 model examples
Cone and cup geometry determines the assembly; single-row bearings normally work in opposed arrangements.
Before selecting a model
- Check the complete cup-and-cone pairing, assembly width T, contact angle, endplay or preload and load direction.
30205-A
Tapered roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 52 mm
- Width, inner ring (B)
- 15 mm
- Width, outer ring (C)
- 13 mm
- Width, total (T)
- 16.25 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
30305-A
Tapered roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 62 mm
- Width, inner ring (B)
- 17 mm
- Width, outer ring (C)
- 15 mm
- Width, total (T)
- 18.25 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
32005-X
Tapered roller bearing
- Bore diameter (d)
- 25 mm
- Outside diameter (D)
- 47 mm
- Width, inner ring (B)
- 15 mm
- Width, outer ring (C)
- 11.5 mm
- Width, total (T)
- 15 mm
Source basis: Schaeffler published catalogue record. Captured 2026-09-02.
Comparison boundary: Cup and cone references, assembled width, contact geometry and setting must be checked as one arrangement. Preserve the full designation and suffix. Equal dimensions alone do not establish interchangeability; blank values remain unknown.
Construction & selection guide →Dimensions retain their source labels: B is not automatically the same as assembly width T, ring width C or section height H. A component with no inner ring may specify Fw rather than a shaft bore d. These examples do not supply installation fits, approval for a machine, or a promised load/speed capability.
What to identify first
Identify the bearing family and the complete FAG designation before choosing a dimension chart. A cylindrical roller bearing's ring arrangement, a spherical bearing's bore form and a spindle bearing's arrangement are different selection questions.
25,142 records currently loaded here. This is BearingScope's coverage, not the manufacturer's entire catalogue. A missing result means a data gap in this website, not that the manufacturer has never made the product.
Find the correct catalogue record
Use the complete FAG designation to identify the relevant Schaeffler medias record and its dimension drawing. HR 1 is a rolling-bearing catalogue; it does not replace a product-specific drawing or application instruction. This page is a searchable reference subset, not a mirror of the entire catalogue.
Use the designation field above for the full marking, or enter bore d, outside diameter D and width B in mm. Leave unknown fields blank. A size chart can find candidates; it cannot establish material, precision or assembly compatibility by itself.
Read the FAG designation in context
These are interpretation notes, not a universal suffix crosswalk. Preserve every unrecognised code for exact-model verification.
| Marking or field | Meaning and limits |
|---|---|
| Full FAG designation | Retain every design, cage, clearance and precision segment; the basic series alone is not an exact specification. |
| X-life / XL | Schaeffler identifies X-life products with XL. Treat it as part of the documented design, not an extra precision grade or a universal replacement instruction. |
| Paired or matched bearings | Keep the arrangement and set information with the record. One loose bearing is not automatically equivalent to a matched set. |
| INA versus FAG | Compare the actual product descriptions and assembly scope; a shared manufacturer group is not evidence of interchangeability. |
FAG interchange: more than a matching envelope
Schaeffler's medias interchange distinguishes full, conditional and non-interchangeable relationships. BearingScope's same-base directory uses its own candidate evidence and must not be read as one of those official approvals. Check full suffixes, component scope and unresolved fields before considering substitution.
Compare FAG with another brand
- Start with the complete designation and supplied component or assembly.
- Compare d×D×B in the same units; for separable bearings include the correct component and assembled dimensions.
- Check closure, clearance, cage, precision, material and lubrication. A blank field remains unknown.
- Compare load and speed figures on the same basis, then check the application's mounting and operating requirements.
Equal boundary dimensions identify a candidate, not an approved replacement. BearingScope does not rank whole brands or certify fitment.
FAG bearing lookup questions
Is this the official FAG catalogue or a shop?
No. BearingScope is an independent lookup and comparison reference. It does not sell bearings, quote prices, certify authenticity or claim to contain the manufacturer's complete current range.
Can I search by inside and outside diameter?
Yes, where corresponding product data is loaded. Enter known dimensions in mm in the search controls above. Add width and family to narrow the result. Measure the loose bearing's boundary dimensions, not a housing's mounting-bolt spacing. Keep uncertain readings separate from exact measurements.
Does a catalogue number prove that the bearing is genuine?
No. A plausible marking or a matching database record does not authenticate a physical item. Retain the full marking, packaging and lot identification for the manufacturer's verification process; neither a photograph nor a country name alone settles authenticity.
Where was my FAG bearing made?
The site does not have a verified factory/lot register. Brand identity and catalogue dimensions cannot establish an individual bearing's manufacturing origin. Check that item's traceability documentation; the missing origin is not filled from another model.
Can I download every FAG PDF or CAD drawing here?
No. Public lookup records and explanatory guides are not a complete document library. A drawing must match the exact model and revision and be permitted for redistribution. Where no such file is provided, the document request remains a data gap.
What if the full suffix gives no result?
Check the lettering, separators and component identity first. You may use the base number to discover related records, but do not remove the suffix from the part you ultimately compare. Record the missing full designation through the site's data-feedback page.
Editorial reference reviewed 2026-10-01. Source basis: Schaeffler — Product catalog medias; Schaeffler HR 1 — Rolling bearings, X-life explanation. Original explanatory text; no catalogue prose, PDF or CAD is represented as a BearingScope manufacturer document.