Thrust ball bearings
1,137 dimension rows · 1,008 model records · FAG, NSK, SKF
Find · understand · compare
Thrust ball bearings: types, dimensions & brand filters
Thrust ball bearings carry axial loads; a separate radial bearing is usually required.
On this page10 sections ⌄
Thrust bearing size chart: model, direction and assembly height
Query 1,530 source-labelled models in 1,659 bearing or specified-seat configurations. Filter the shaft bore, outside envelope and complete height together. A housing-washer opening, one washer’s thickness or a roller diameter is not the same measurement.
Keep the shaft-washer bore distinct from the housing-washer opening. These ball-thrust records need separate radial support.
Filters update immediately. Dimensions match the envelope shown in each row; optional seat configurations are labelled separately and are not new catalogue part numbers. Changing construction clears dimension fields. Changing units converts valid inputs; inch results are conversions rounded to six decimals, not an inch-series classification.
1,137 configurations match. Showing 1–24.
| Brand / model / configuration | Shaft bore | Envelope outside | Assembly height | Axial directions | Assembly scope |
|---|---|---|---|---|---|
| SKFBA 3Recorded bearing | 3 mmd | 8 mmD | 3.5 mmH | One direction | Flat-seat bearing |
| SKFBA 4Recorded bearing | 4 mmd | 10 mmD | 4 mmH | One direction | Flat-seat bearing |
| SKFBA 5Recorded bearing | 5 mmd | 12 mmD | 4 mmH | One direction | Flat-seat bearing |
| SKFBA 6Recorded bearing | 6 mmd | 14 mmD | 5 mmH | One direction | Flat-seat bearing |
| SKFBA 7Recorded bearing | 7 mmd | 17 mmD | 6 mmH | One direction | Flat-seat bearing |
| SKFBA 8Recorded bearing | 8 mmd | 19 mmD | 7 mmH | One direction | Flat-seat bearing |
| SKFBA 9Recorded bearing | 9 mmd | 20 mmD | 7 mmH | One direction | Flat-seat bearing |
| FAG51100Recorded bearing | 10 mmd | 24 mmD | 9 mmT | One direction | Recorded complete bearing; seat construction not reported |
| NSK51100Recorded bearing | 10 mmd | 24 mmD | 9 mmT | One direction | Flat-seat bearing |
| SKF51100Recorded bearing | 10 mmd | 24 mmD | 9 mmH | One direction | Flat-seat bearing |
| FAG51200Recorded bearing | 10 mmd | 26 mmD | 11 mmT | One direction | Recorded complete bearing; seat construction not reported |
| NSK51200Recorded bearing | 10 mmd | 26 mmD | 11 mmT | One direction | Flat-seat bearing |
| SKF51200Recorded bearing | 10 mmd | 26 mmD | 11 mmH | One direction | Flat-seat bearing |
| NSK53200Recorded bearing | 10 mmd | 26 mmD | 11.6 mmT3 | One direction | Sphered/aligning bearing; additional seat washer not included in this envelope |
| NSK53200URecorded bearing | 10 mmd | 28 mmD3 | 13 mmT4 | One direction | Specified aligning seat washer included |
| FAG52202Recorded bearing | 10 mmd | 32 mmD | 22 mmT2 | Both directions | Recorded complete bearing; seat construction not reported |
| NSK52202Recorded bearing | 10 mmd2 | 32 mmD | 22 mmT1 | Both directions | Flat-seat bearing |
| SKF52202Recorded bearing | 10 mmd | 32 mmD | 22 mmH | Both directions | Flat-seat bearing |
| NSK54202Recorded bearing | 10 mmd2 | 32 mmD | 24.6 mmT5 | Both directions | Sphered/aligning bearing; additional seat washer not included in this envelope |
| NSK54202URecorded bearing | 10 mmd2 | 35 mmD3 | 28 mmT7 | Both directions | Specified aligning seat washer included |
| FAG51101Recorded bearing | 12 mmd | 26 mmD | 9 mmT | One direction | Recorded complete bearing; seat construction not reported |
| NSK51101Recorded bearing | 12 mmd | 26 mmD | 9 mmT | One direction | Flat-seat bearing |
| SKF51101Recorded bearing | 12 mmd | 26 mmD | 9 mmH | One direction | Flat-seat bearing |
| FAG51201Recorded bearing | 12 mmd | 28 mmD | 11 mmT | One direction | Recorded complete bearing; seat construction not reported |
No verified configuration matches these conditions in this snapshot. Check units, construction and the full marking. A nearby size is not substituted; absence here does not prove that a part does not exist.
Why apparently similar dimensions are kept separate
- Shaft bore vs housing opening
- The shaft washer locates on the shaft; the housing washer is a different component. The original symbol stays below each value. NSK double-direction rows use d2 for the actual shaft bore; the separate drawing dimension d must not replace it.
- Complete height vs part thickness
- H, T and indexed T symbols can describe different complete configurations across manufacturers. Read the row’s scope. A central washer thickness or a partial height in a drawing is not the complete assembly height.
- With a separate seat washer
- A sphered housing washer and an additional aligning seat washer are not the same part. The chart adds a separate configuration only when the source explicitly identifies the seat washer and gives its resulting outside envelope and height. The extra height is not calculated by adding component thicknesses.
- Direction is about axial force
- One-direction and both-direction describe axial load support, not clockwise versus counterclockwise rotation. Double direction is not a claim of double the load capacity.
Checks before using a dimensional candidate
- Match the complete marking, bearing construction and whether separate washers belong to the assembly. Do not identify an OEM kit by dimensions alone.
- Match the actual shaft bore, outside envelope and installed height. For a seat-washer configuration, check the named seat and mating spherical geometry.
- Open the product record for available ratings, speeds, chamfers and component dimensions. Confirm that load ratings are axial before using a calculation tool.
- Check minimum load, lubrication, fits, shoulders, retention and temperature with the applicable manufacturer instructions. Thrust ball bearings cannot supply the missing radial support.
Source-property snapshot 2026-10-03. The chart is an independent nominal-dimension reference, not a full catalogue, stock list, toleranced drawing or replacement approval. Separate washers/cages, combined radial/axial units, precision angular-contact assemblies and plain thrust pads need their own geometry. Rows without unambiguous manufacturer dimensions remain outside this chart. Construction guidance: NSK Thrust Ball Bearings and Bearing ABCs; dimensions and optional configurations: the retained manufacturer properties.
What is this bearing type?
A thrust ball bearing supports axial load along the shaft. It is not designed to carry radial load. A single-direction assembly supports axial force in one direction; a double-direction assembly provides support in both directions.
| Part or design | What it does | What to verify |
|---|---|---|
| Shaft washer | Locates on the shaft side of the assembly. | Identify it separately from the housing washer. |
| Housing washer | Supports the other side of the ball-and-cage assembly. | Check the seat and support geometry. |
| Ball-and-cage assembly | One assembly in single-direction designs; two in double-direction designs. | Do not compare washer width with the assembled axial height. |
On a small screen, scroll the table horizontally to read all three columns.
Variants that change the answer
Flat-seat and aligning-seat arrangements differ. A double-direction design has an intermediate shaft washer and two ball-and-cage assemblies; it is not created simply by reversing one single-direction bearing.
What the family name cannot tell you
Provide radial guidance through an appropriate separate support. The word “thrust” does not by itself specify the required minimum axial load or permissible speed.
Identify the exact part before comparing
- Identify which way the axial force can act.
- Compare complete-assembly dimensions and the washer seats.
- Check minimum load, speed and lubrication against the exact catalogue entry.
Technical reference basis: NSK: Thrust Ball Bearings. Explanation and lookup workflow: BearingScope. Manufacturer-specific limits remain attached to the exact product record.
Thrust ball bearings: load direction, washers, dimensions and selection
Thrust and axial load both mean force along the shaft. Identify whether the part is a ball thrust bearing, roller thrust assembly or a sliding thrust pad before comparing sizes or installation instructions.
Axial versus radial: what a thrust bearing does
Axial force acts parallel to the shaft axis; radial force acts across it. A thrust ball bearing transfers axial force between its shaft and housing washers through the balls. It does not provide radial support. Another appropriate support must carry the radial duty in the machine.
| Question | Answer | Selection implication |
|---|---|---|
| Axial or thrust? | Two terms for the same load direction | Do not create separate load cases merely because the names differ. |
| One direction or two? | Direction refers to axial force, not rotation | A shaft can reverse rotation without making a single-direction unit double-direction. |
| Both radial and axial load? | Use a suitable combined-load arrangement or separate supports | An ordinary thrust ball bearing alone is not a combined-load bearing. |
On a small screen, scroll the table horizontally.
Single direction, double direction and the washer stack
A shaft washer and a housing washer serve different interfaces even when they look similar. Their bores and seating requirements can differ. Keep raceway faces toward the balls and identify every washer from the assembly drawing.
| Construction | Main components | Axial support |
|---|---|---|
| Single direction | Shaft washer, ball-and-cage assembly, housing washer | One axial direction. |
| Double direction | Central shaft washer, two ball-and-cage assemblies and two housing washers | Both axial directions. |
| Aligning-seat version | The specified spherical/aligning seat components | Helps accommodate mounting error within its documented scope. |
On a small screen, scroll the table horizontally.
An aligning seat is not permission to impose radial load. Do not use a plain hardware washer as an unverified substitute for a bearing raceway washer.
Measure the complete d×D×T assembly
Record the shaft-washer bore d, housing-washer outside diameter D and complete assembled height T as named in the drawing. Measure the correct seated stack; one loose washer's thickness or a cage-only height is not the complete bearing height.
| NSK reference model | d — bore | D — outside | T — height | Axial dynamic / static rating |
|---|---|---|---|---|
| 51104 | 20 mm | 35 mm | 10 mm | 15.1 / 26.6 kN |
| 51105 | 25 mm | 42 mm | 11 mm | 19.7 / 37.0 kN |
| 51205 | 25 mm | 47 mm | 15 mm | 28.0 / 50.5 kN |
On a small screen, scroll the table horizontally.
These are manufacturer-specific NSK reference records reviewed for this page. Ratings are axial basic ratings, not permitted working loads. The 25 mm bore shared by 51105 and 51205 does not make their envelopes interchangeable. All listed dimensions are nominal.
Flat seat, spherical seat and bearing-family alternatives
JTEKT lists 51100, 51200, 51300 and 51400 series with flat seats, 53200/53300/53400 with spherical seats, and the corresponding U-listed forms with aligning seat washers. These are series examples from that reference, not complete part numbers or universal suffix rules.
| Search wording | Identify this first | Do not substitute |
|---|---|---|
| Thrust ball / axial ball | Ball-and-washer construction and direction count | A radial deep-groove bearing based only on bore. |
| Roller or needle thrust | Roller geometry, cage and race-washer scope | A thrust ball stack of similar outside diameter. |
| Journal and thrust | Radial journal support versus axial support; rolling or sliding construction | An engine thrust surface with an industrial ball thrust bearing. |
| Tilting pad / fluid film / magnetic thrust | A different support mechanism | The installation and rating rules on this ball-bearing page. |
On a small screen, scroll the table horizontally.
Installation direction and mounting checks
- Isolate and support the machine, then identify the direction and reversal of the axial load.
- Match the shaft washer, housing washer, cage and any aligning seat to the exact assembly drawing.
- Check which washer locates on the shaft and which on the housing; do not swap them by appearance.
- Check shoulders, seating faces, fit and the separate radial support. Avoid imposing unintended radial restraint on a thrust-only design.
- Apply the specified lubrication, retention and minimum-load provisions, then inspect the completed stack using the machine procedure.
This checklist does not supply a machine-specific fit, nut torque, preload or end-play setting. A car's 'thrust bearing' may mean an engine thrust surface, clutch release bearing or another component that needs a separate service procedure.
Load, speed, minimum load and lubrication
Selection requires the actual axial load, duty cycle, speed and lubricant. A basic dynamic or static rating is not a free-standing safe working load. Check the exact bearing's speed and minimum-load conditions together with the installation.
SKF's thrust-bearing reference relates required minimum load to bearing factors and speed. An unloaded or lightly loaded rotating bearing cannot be approved just because its main load rating is large. No numerical minimum is inferred here without the correct bearing factor and conditions.
- Separate continuous axial duty, reversals, starts and shock loads.
- Use the exact bearing's axial ratings and lubrication-specific speed limits.
- Check required minimum load and any specified spring or preload arrangement.
- Check temperature, lubricant delivery, cleanliness and expected service life without treating a calculated fatigue life as a guarantee.
Choose by the mechanism, not the application's nickname
Manufacturer application examples are starting points. They do not approve a thrust ball bearing for every bandsaw guide, washing machine kit, vehicle, turbocharger or propeller-shaft installation.
| Application context | Useful question | Still required |
|---|---|---|
| Screw support or positioning stage | Where does the axial reaction go, and must it reverse? | Exact bearing arrangement, precision and stiffness requirements. |
| Vertical shaft | Which support carries weight and which guides radially? | Loads, retention, speed and lubrication delivery. |
| Rotating platform or pivot | Is there radial load or an overturning moment as well as thrust? | Complete support geometry, not only the axial rating. |
| Printer, reel or small mechanism | Is the supplied unit a separable stack or retained assembly? | Dimensions, sealing and the device's actual part identity. |
On a small screen, scroll the table horizontally.
Thrust ball bearing numbers: distinguish direction and seat construction
Use the full marking before choosing a size. In the NSK E1103d (2025) catalogue, the three seat constructions below have separate designations and heights. A number with U includes the specified aligning seat washer; it is not the same envelope as the flat-seat bearing.
These are NSK catalogue series, not universal rules for every manufacturer. A family prefix identifies a construction, not a complete available model. Use the exact rows and linked model records below.
| Axial directions | Flat seat | Aligning seat | With aligning seat washer |
|---|---|---|---|
| Single | 511 | Not listed | Not listed |
| Single | 512 | 532 | 532…U |
| Single | 513 | 533 | 533…U |
| Single | 514 | 534 | 534…U |
| Double | 522 | 542 | 542…U |
| Double | 523 | 543 | 543…U |
| Double | 524 | 544 | 544…U |
On a small screen, scroll the table horizontally.
Example: 51200, 53200 and 53200U share a source row, but their complete dimensions are 10×26×11 mm, 10×26×11.6 mm and 10×28×13 mm respectively. Equal load ratings in that row do not make them directly interchangeable.
For the single-direction flat series, 51100, 51101, 51102 and 51103 have 10, 12, 15 and 17 mm bores. Do not extend that shortcut to double-direction numbers: 52202 has a 10 mm central-washer bore d2, while the separate d dimension in its drawing is 15 mm.
X qualifies washer geometry in these tables: the shaft/central washer outside diameter is smaller than the housing washer diameter. X does not mean an ABEC accuracy grade. Keep it in the marking.
Source: construction C296–C297; single-direction tables C298–C305; double-direction C306–C311. Missing cells do not authorise generating extra variants.
Single-direction size chart: 10–50 mm shaft bores
These are all 34 flat-seat entries within this bore range in the reviewed NSK tables. Dimensions are nominal millimetres. The chart is a reference, not a statement of stock or a universal catalogue of every brand.
Read bore d, outside diameter D and complete height T. A separate aligning-seat washer changes the assembly envelope.
| NSK model | Bore (mm) | Outside D (mm) | Height (mm) | Ca / C0a — axial (kN) |
|---|---|---|---|---|
| 51100 | 10 | 24 | 9 | 10.1 / 14 |
| 51200 | 10 | 26 | 11 | 12.8 / 17.1 |
| 51101 | 12 | 26 | 9 | 10.4 / 15.4 |
| 51201 | 12 | 28 | 11 | 13.3 / 19 |
| 51102 | 15 | 28 | 9 | 10.6 / 16.8 |
| 51202 | 15 | 32 | 12 | 16.7 / 24.8 |
| 51103 | 17 | 30 | 9 | 11.4 / 19.5 |
| 51203 | 17 | 35 | 12 | 17.3 / 27.3 |
| 51104 | 20 | 35 | 10 | 15.1 / 26.6 |
| 51204 | 20 | 40 | 14 | 22.5 / 37.5 |
| 51105 | 25 | 42 | 11 | 19.7 / 37 |
| 51205 | 25 | 47 | 15 | 28 / 50.5 |
| 51305 | 25 | 52 | 18 | 36 / 61.5 |
| 51405 | 25 | 60 | 24 | 56 / 89.5 |
| 51106 | 30 | 47 | 11 | 20.6 / 42 |
| 51206 | 30 | 52 | 16 | 29.5 / 58 |
| 51306 | 30 | 60 | 21 | 43 / 78.5 |
| 51406 | 30 | 70 | 28 | 73 / 126 |
| 51107 | 35 | 52 | 12 | 22.1 / 49.5 |
| 51207 | 35 | 62 | 18 | 39.5 / 78 |
| 51307 | 35 | 68 | 24 | 56 / 105 |
| 51407 | 35 | 80 | 32 | 87.5 / 155 |
| 51108 | 40 | 60 | 13 | 27.1 / 63 |
| 51208 | 40 | 68 | 19 | 47.5 / 98.5 |
| 51308 | 40 | 78 | 26 | 70 / 135 |
| 51408 | 40 | 90 | 36 | 103 / 188 |
| 51109 | 45 | 65 | 14 | 28.1 / 69 |
| 51209 | 45 | 73 | 20 | 48 / 105 |
| 51309 | 45 | 85 | 28 | 80.5 / 163 |
| 51409 | 45 | 100 | 39 | 128 / 246 |
| 51110 | 50 | 70 | 14 | 29 / 75.5 |
| 51210 | 50 | 78 | 22 | 49 / 111 |
| 51310 | 50 | 95 | 31 | 97.5 / 202 |
| 51410 | 50 | 110 | 43 | 147 / 288 |
On a small screen, scroll the table horizontally.
Source: NSK E1103d Part C, C298–C305. Ca/C0a are basic axial ratings, not radial ratings or permissible working loads. Open a model below for its lubrication-specific speeds, component and mounting dimensions.
NSK 51100 — 10×24×9 mm →NSK 51200 — 10×26×11 mm →NSK 51101 — 12×26×9 mm →NSK 51201 — 12×28×11 mm →NSK 51102 — 15×28×9 mm →NSK 51202 — 15×32×12 mm →NSK 51103 — 17×30×9 mm →NSK 51203 — 17×35×12 mm →NSK 51104 — 20×35×10 mm →NSK 51204 — 20×40×14 mm →NSK 51105 — 25×42×11 mm →NSK 51205 — 25×47×15 mm →NSK 51305 — 25×52×18 mm →NSK 51405 — 25×60×24 mm →NSK 51106 — 30×47×11 mm →NSK 51206 — 30×52×16 mm →NSK 51306 — 30×60×21 mm →NSK 51406 — 30×70×28 mm →NSK 51107 — 35×52×12 mm →NSK 51207 — 35×62×18 mm →NSK 51307 — 35×68×24 mm →NSK 51407 — 35×80×32 mm →NSK 51108 — 40×60×13 mm →NSK 51208 — 40×68×19 mm →NSK 51308 — 40×78×26 mm →NSK 51408 — 40×90×36 mm →NSK 51109 — 45×65×14 mm →NSK 51209 — 45×73×20 mm →NSK 51309 — 45×85×28 mm →NSK 51409 — 45×100×39 mm →NSK 51110 — 50×70×14 mm →NSK 51210 — 50×78×22 mm →NSK 51310 — 50×95×31 mm →NSK 51410 — 50×110×43 mm →
Single-direction size chart: 55–100 mm shaft bores
These are all 36 flat-seat entries within this bore range in the reviewed NSK tables. Dimensions are nominal millimetres. The chart is a reference, not a statement of stock or a universal catalogue of every brand.
Read bore d, outside diameter D and complete height T. A separate aligning-seat washer changes the assembly envelope.
| NSK model | Bore (mm) | Outside D (mm) | Height (mm) | Ca / C0a — axial (kN) |
|---|---|---|---|---|
| 51111 | 55 | 78 | 16 | 35 / 93 |
| 51211 | 55 | 90 | 25 | 70 / 159 |
| 51311 | 55 | 105 | 35 | 115 / 244 |
| 51411 | 55 | 120 | 48 | 181 / 350 |
| 51112 | 60 | 85 | 17 | 41.5 / 113 |
| 51212 | 60 | 95 | 26 | 71.5 / 169 |
| 51312 | 60 | 110 | 35 | 119 / 263 |
| 51412 | 60 | 130 | 51 | 202 / 395 |
| 51113 | 65 | 90 | 18 | 42 / 117 |
| 51213 | 65 | 100 | 27 | 75.5 / 189 |
| 51313 | 65 | 115 | 36 | 123 / 282 |
| 51413 | 65 | 140 | 56 | 234 / 495 |
| 51114 | 70 | 95 | 18 | 43.5 / 127 |
| 51214 | 70 | 105 | 27 | 74 / 189 |
| 51314 | 70 | 125 | 40 | 137 / 315 |
| 51414 | 70 | 150 | 60 | 252 / 555 |
| 51115 | 75 | 100 | 19 | 43.5 / 131 |
| 51215 | 75 | 110 | 27 | 78 / 209 |
| 51315 | 75 | 135 | 44 | 159 / 365 |
| 51415 | 75 | 160 | 65 | 254 / 560 |
| 51116 | 80 | 105 | 19 | 45 / 141 |
| 51216 | 80 | 115 | 28 | 79 / 218 |
| 51316 | 80 | 140 | 44 | 164 / 395 |
| 51416 | 80 | 170 | 68 | 272 / 620 |
| 51117 | 85 | 110 | 19 | 46.5 / 150 |
| 51217 | 85 | 125 | 31 | 96 / 264 |
| 51317 | 85 | 150 | 49 | 207 / 490 |
| 51417X | 85 | 180 | 72 | 310 / 755 |
| 51118 | 90 | 120 | 22 | 60 / 190 |
| 51218 | 90 | 135 | 35 | 114 / 310 |
| 51318 | 90 | 155 | 50 | 214 / 525 |
| 51418X | 90 | 190 | 77 | 330 / 825 |
| 51120 | 100 | 135 | 25 | 86 / 268 |
| 51220 | 100 | 150 | 38 | 135 / 375 |
| 51320 | 100 | 170 | 55 | 239 / 595 |
| 51420X | 100 | 210 | 85 | 370 / 985 |
On a small screen, scroll the table horizontally.
Source: NSK E1103d Part C, C298–C305. Ca/C0a are basic axial ratings, not radial ratings or permissible working loads. Open a model below for its lubrication-specific speeds, component and mounting dimensions.
NSK 51111 — 55×78×16 mm →NSK 51211 — 55×90×25 mm →NSK 51311 — 55×105×35 mm →NSK 51411 — 55×120×48 mm →NSK 51112 — 60×85×17 mm →NSK 51212 — 60×95×26 mm →NSK 51312 — 60×110×35 mm →NSK 51412 — 60×130×51 mm →NSK 51113 — 65×90×18 mm →NSK 51213 — 65×100×27 mm →NSK 51313 — 65×115×36 mm →NSK 51413 — 65×140×56 mm →NSK 51114 — 70×95×18 mm →NSK 51214 — 70×105×27 mm →NSK 51314 — 70×125×40 mm →NSK 51414 — 70×150×60 mm →NSK 51115 — 75×100×19 mm →NSK 51215 — 75×110×27 mm →NSK 51315 — 75×135×44 mm →NSK 51415 — 75×160×65 mm →NSK 51116 — 80×105×19 mm →NSK 51216 — 80×115×28 mm →NSK 51316 — 80×140×44 mm →NSK 51416 — 80×170×68 mm →NSK 51117 — 85×110×19 mm →NSK 51217 — 85×125×31 mm →NSK 51317 — 85×150×49 mm →NSK 51417X — 85×180×72 mm →NSK 51118 — 90×120×22 mm →NSK 51218 — 90×135×35 mm →NSK 51318 — 90×155×50 mm →NSK 51418X — 90×190×77 mm →NSK 51120 — 100×135×25 mm →NSK 51220 — 100×150×38 mm →NSK 51320 — 100×170×55 mm →NSK 51420X — 100×210×85 mm →
Large thrust ball bearing size chart: 110–360 mm shaft bores
These are all 54 flat-seat entries within this bore range in the reviewed NSK tables. Dimensions are nominal millimetres. The chart is a reference, not a statement of stock or a universal catalogue of every brand.
Read bore d, outside diameter D and complete height T. A separate aligning-seat washer changes the assembly envelope.
| NSK model | Bore (mm) | Outside D (mm) | Height (mm) | Ca / C0a — axial (kN) |
|---|---|---|---|---|
| 51122 | 110 | 145 | 25 | 88 / 288 |
| 51222 | 110 | 160 | 38 | 136 / 395 |
| 51322X | 110 | 190 | 63 | 282 / 755 |
| 51422X | 110 | 230 | 95 | 415 / 1150 |
| 51124 | 120 | 155 | 25 | 90 / 310 |
| 51224 | 120 | 170 | 39 | 141 / 430 |
| 51324X | 120 | 210 | 70 | 330 / 930 |
| 51424X | 120 | 250 | 102 | 480 / 1400 |
| 51126 | 130 | 170 | 30 | 105 / 350 |
| 51226X | 130 | 190 | 45 | 183 / 550 |
| 51326X | 130 | 225 | 75 | 350 / 1030 |
| 51426X | 130 | 270 | 110 | 525 / 1590 |
| 51128X | 140 | 180 | 31 | 107 / 375 |
| 51228X | 140 | 200 | 46 | 186 / 575 |
| 51328X | 140 | 240 | 80 | 370 / 1130 |
| 51428X | 140 | 280 | 112 | 550 / 1750 |
| 51130X | 150 | 190 | 31 | 110 / 400 |
| 51230X | 150 | 215 | 50 | 238 / 735 |
| 51330X | 150 | 250 | 80 | 380 / 1200 |
| 51430X | 150 | 300 | 120 | 620 / 2010 |
| 51132X | 160 | 200 | 31 | 113 / 425 |
| 51232X | 160 | 225 | 51 | 249 / 805 |
| 51332X | 160 | 270 | 87 | 475 / 1570 |
| 51432X | 160 | 320 | 130 | 650 / 2210 |
| 51134X | 170 | 215 | 34 | 135 / 510 |
| 51234X | 170 | 240 | 55 | 280 / 915 |
| 51334X | 170 | 280 | 87 | 465 / 1570 |
| 51434X | 170 | 340 | 135 | 715 / 2480 |
| 51136X | 180 | 225 | 34 | 136 / 530 |
| 51236X | 180 | 250 | 56 | 284 / 955 |
| 51336X | 180 | 300 | 95 | 480 / 1680 |
| 51436X | 180 | 360 | 140 | 750 / 2730 |
| 51138X | 190 | 240 | 37 | 172 / 655 |
| 51238X | 190 | 270 | 62 | 320 / 1110 |
| 51338X | 190 | 320 | 105 | 550 / 1960 |
| 51140X | 200 | 250 | 37 | 173 / 675 |
| 51240X | 200 | 280 | 62 | 315 / 1110 |
| 51340X | 200 | 340 | 110 | 600 / 2220 |
| 51144X | 220 | 270 | 37 | 179 / 740 |
| 51244X | 220 | 300 | 63 | 325 / 1210 |
| 51148X | 240 | 300 | 45 | 229 / 935 |
| 51248X | 240 | 340 | 78 | 420 / 1650 |
| 51152X | 260 | 320 | 45 | 233 / 990 |
| 51252X | 260 | 360 | 79 | 435 / 1800 |
| 51156X | 280 | 350 | 53 | 315 / 1310 |
| 51256X | 280 | 380 | 80 | 450 / 1950 |
| 51160X | 300 | 380 | 62 | 360 / 1560 |
| 51260X | 300 | 420 | 95 | 540 / 2410 |
| 51164X | 320 | 400 | 63 | 365 / 1660 |
| 51264X | 320 | 440 | 95 | 585 / 2680 |
| 51168X | 340 | 420 | 64 | 375 / 1760 |
| 51268X | 340 | 460 | 96 | 595 / 2800 |
| 51172X | 360 | 440 | 65 | 385 / 1860 |
| 51272X | 360 | 500 | 110 | 705 / 3500 |
On a small screen, scroll the table horizontally.
Source: NSK E1103d Part C, C298–C305. Ca/C0a are basic axial ratings, not radial ratings or permissible working loads. Open a model below for its lubrication-specific speeds, component and mounting dimensions.
NSK 51122 — 110×145×25 mm →NSK 51222 — 110×160×38 mm →NSK 51322X — 110×190×63 mm →NSK 51422X — 110×230×95 mm →NSK 51124 — 120×155×25 mm →NSK 51224 — 120×170×39 mm →NSK 51324X — 120×210×70 mm →NSK 51424X — 120×250×102 mm →NSK 51126 — 130×170×30 mm →NSK 51226X — 130×190×45 mm →NSK 51326X — 130×225×75 mm →NSK 51426X — 130×270×110 mm →NSK 51128X — 140×180×31 mm →NSK 51228X — 140×200×46 mm →NSK 51328X — 140×240×80 mm →NSK 51428X — 140×280×112 mm →NSK 51130X — 150×190×31 mm →NSK 51230X — 150×215×50 mm →NSK 51330X — 150×250×80 mm →NSK 51430X — 150×300×120 mm →NSK 51132X — 160×200×31 mm →NSK 51232X — 160×225×51 mm →NSK 51332X — 160×270×87 mm →NSK 51432X — 160×320×130 mm →NSK 51134X — 170×215×34 mm →NSK 51234X — 170×240×55 mm →NSK 51334X — 170×280×87 mm →NSK 51434X — 170×340×135 mm →NSK 51136X — 180×225×34 mm →NSK 51236X — 180×250×56 mm →NSK 51336X — 180×300×95 mm →NSK 51436X — 180×360×140 mm →NSK 51138X — 190×240×37 mm →NSK 51238X — 190×270×62 mm →NSK 51338X — 190×320×105 mm →NSK 51140X — 200×250×37 mm →NSK 51240X — 200×280×62 mm →NSK 51340X — 200×340×110 mm →NSK 51144X — 220×270×37 mm →NSK 51244X — 220×300×63 mm →NSK 51148X — 240×300×45 mm →NSK 51248X — 240×340×78 mm →NSK 51152X — 260×320×45 mm →NSK 51252X — 260×360×79 mm →NSK 51156X — 280×350×53 mm →NSK 51256X — 280×380×80 mm →NSK 51160X — 300×380×62 mm →NSK 51260X — 300×420×95 mm →NSK 51164X — 320×400×63 mm →NSK 51264X — 320×440×95 mm →NSK 51168X — 340×420×64 mm →NSK 51268X — 340×460×96 mm →NSK 51172X — 360×440×65 mm →NSK 51272X — 360×500×110 mm →
Double-direction size chart: 10–55 mm central-washer bores
These are all 32 flat-seat entries within this bore range in the reviewed NSK tables. Dimensions are nominal millimetres. The chart is a reference, not a statement of stock or a universal catalogue of every brand.
Read the actual central shaft-washer bore d2 and complete height T1. The separate d dimension shown in the catalogue is not the bore. Double direction means support of axial force in either direction, not two times the listed capacity.
| NSK model | Bore (mm) | Outside D (mm) | Height (mm) | Ca / C0a — axial (kN) |
|---|---|---|---|---|
| 52202 | 10 | 32 | 22 | 16.7 / 24.8 |
| 52204 | 15 | 40 | 26 | 22.5 / 37.5 |
| 52405 | 15 | 60 | 45 | 56 / 89.5 |
| 52205 | 20 | 47 | 28 | 28 / 50.5 |
| 52305 | 20 | 52 | 34 | 36 / 61.5 |
| 52406 | 20 | 70 | 52 | 73 / 126 |
| 52206 | 25 | 52 | 29 | 29.5 / 58 |
| 52306 | 25 | 60 | 38 | 43 / 78.5 |
| 52407 | 25 | 80 | 59 | 87.5 / 155 |
| 52207 | 30 | 62 | 34 | 39.5 / 78 |
| 52307 | 30 | 68 | 44 | 56 / 105 |
| 52208 | 30 | 68 | 36 | 47.5 / 98.5 |
| 52308 | 30 | 78 | 49 | 70 / 135 |
| 52408 | 30 | 90 | 65 | 103 / 188 |
| 52209 | 35 | 73 | 37 | 48 / 105 |
| 52309 | 35 | 85 | 52 | 80.5 / 163 |
| 52409 | 35 | 100 | 72 | 128 / 246 |
| 52210 | 40 | 78 | 39 | 49 / 111 |
| 52310 | 40 | 95 | 58 | 97.5 / 202 |
| 52410 | 40 | 110 | 78 | 147 / 288 |
| 52211 | 45 | 90 | 45 | 70 / 159 |
| 52311 | 45 | 105 | 64 | 115 / 244 |
| 52411 | 45 | 120 | 87 | 181 / 350 |
| 52212 | 50 | 95 | 46 | 71.5 / 169 |
| 52312 | 50 | 110 | 64 | 119 / 263 |
| 52412 | 50 | 130 | 93 | 202 / 395 |
| 52413 | 50 | 140 | 101 | 234 / 495 |
| 52213 | 55 | 100 | 47 | 75.5 / 189 |
| 52313 | 55 | 115 | 65 | 123 / 282 |
| 52214 | 55 | 105 | 47 | 74 / 189 |
| 52314 | 55 | 125 | 72 | 137 / 315 |
| 52414 | 55 | 150 | 107 | 252 / 555 |
On a small screen, scroll the table horizontally.
Source: NSK E1103d Part C, C306–C311. Ca/C0a are basic axial ratings, not radial ratings or permissible working loads. Open a model below for its lubrication-specific speeds, component and mounting dimensions.
NSK 52202 — 10×32×22 mm →NSK 52204 — 15×40×26 mm →NSK 52405 — 15×60×45 mm →NSK 52205 — 20×47×28 mm →NSK 52305 — 20×52×34 mm →NSK 52406 — 20×70×52 mm →NSK 52206 — 25×52×29 mm →NSK 52306 — 25×60×38 mm →NSK 52407 — 25×80×59 mm →NSK 52207 — 30×62×34 mm →NSK 52307 — 30×68×44 mm →NSK 52208 — 30×68×36 mm →NSK 52308 — 30×78×49 mm →NSK 52408 — 30×90×65 mm →NSK 52209 — 35×73×37 mm →NSK 52309 — 35×85×52 mm →NSK 52409 — 35×100×72 mm →NSK 52210 — 40×78×39 mm →NSK 52310 — 40×95×58 mm →NSK 52410 — 40×110×78 mm →NSK 52211 — 45×90×45 mm →NSK 52311 — 45×105×64 mm →NSK 52411 — 45×120×87 mm →NSK 52212 — 50×95×46 mm →NSK 52312 — 50×110×64 mm →NSK 52412 — 50×130×93 mm →NSK 52413 — 50×140×101 mm →NSK 52213 — 55×100×47 mm →NSK 52313 — 55×115×65 mm →NSK 52214 — 55×105×47 mm →NSK 52314 — 55×125×72 mm →NSK 52414 — 55×150×107 mm →
Double-direction size chart: 60–190 mm central-washer bores
These are all 44 flat-seat entries within this bore range in the reviewed NSK tables. Dimensions are nominal millimetres. The chart is a reference, not a statement of stock or a universal catalogue of every brand.
Read the actual central shaft-washer bore d2 and complete height T1. The separate d dimension shown in the catalogue is not the bore. Double direction means support of axial force in either direction, not two times the listed capacity.
| NSK model | Bore (mm) | Outside D (mm) | Height (mm) | Ca / C0a — axial (kN) |
|---|---|---|---|---|
| 52215 | 60 | 110 | 47 | 78 / 209 |
| 52315 | 60 | 135 | 79 | 159 / 365 |
| 52415 | 60 | 160 | 115 | 254 / 560 |
| 52216 | 65 | 115 | 48 | 79 / 218 |
| 52316 | 65 | 140 | 79 | 164 / 395 |
| 52416 | 65 | 170 | 120 | 272 / 620 |
| 52417X | 65 | 180 | 128 | 310 / 755 |
| 52217 | 70 | 125 | 55 | 96 / 264 |
| 52317 | 70 | 150 | 87 | 207 / 490 |
| 52418X | 70 | 190 | 135 | 330 / 825 |
| 52218 | 75 | 135 | 62 | 114 / 310 |
| 52318 | 75 | 155 | 88 | 214 / 525 |
| 52420X | 80 | 210 | 150 | 370 / 985 |
| 52220 | 85 | 150 | 67 | 135 / 375 |
| 52320 | 85 | 170 | 97 | 239 / 595 |
| 52422X | 90 | 230 | 166 | 415 / 1150 |
| 52222 | 95 | 160 | 67 | 136 / 395 |
| 52322X | 95 | 190 | 110 | 282 / 755 |
| 52424X | 95 | 250 | 177 | 515 / 1540 |
| 52224 | 100 | 170 | 68 | 141 / 430 |
| 52324X | 100 | 210 | 123 | 330 / 930 |
| 52426X | 100 | 270 | 192 | 525 / 1590 |
| 52226X | 110 | 190 | 80 | 183 / 550 |
| 52326X | 110 | 225 | 130 | 350 / 1030 |
| 52428X | 110 | 280 | 196 | 550 / 1750 |
| 52228X | 120 | 200 | 81 | 186 / 575 |
| 52328X | 120 | 240 | 140 | 370 / 1130 |
| 52430X | 120 | 300 | 209 | 620 / 2010 |
| 52230X | 130 | 215 | 89 | 238 / 735 |
| 52330X | 130 | 250 | 140 | 380 / 1200 |
| 52432X | 130 | 320 | 226 | 650 / 2210 |
| 52434X | 135 | 340 | 236 | 715 / 2480 |
| 52232X | 140 | 225 | 90 | 249 / 805 |
| 52332X | 140 | 270 | 153 | 475 / 1570 |
| 52436X | 140 | 360 | 245 | 750 / 2730 |
| 52234X | 150 | 240 | 97 | 280 / 915 |
| 52334X | 150 | 280 | 153 | 465 / 1570 |
| 52236X | 150 | 250 | 98 | 284 / 955 |
| 52336X | 150 | 300 | 165 | 480 / 1680 |
| 52238X | 160 | 270 | 109 | 320 / 1110 |
| 52338X | 160 | 320 | 183 | 550 / 1960 |
| 52240X | 170 | 280 | 109 | 315 / 1110 |
| 52340X | 170 | 340 | 192 | 600 / 2220 |
| 52244X | 190 | 300 | 110 | 325 / 1210 |
On a small screen, scroll the table horizontally.
Source: NSK E1103d Part C, C306–C311. Ca/C0a are basic axial ratings, not radial ratings or permissible working loads. Open a model below for its lubrication-specific speeds, component and mounting dimensions.
NSK 52215 — 60×110×47 mm →NSK 52315 — 60×135×79 mm →NSK 52415 — 60×160×115 mm →NSK 52216 — 65×115×48 mm →NSK 52316 — 65×140×79 mm →NSK 52416 — 65×170×120 mm →NSK 52417X — 65×180×128 mm →NSK 52217 — 70×125×55 mm →NSK 52317 — 70×150×87 mm →NSK 52418X — 70×190×135 mm →NSK 52218 — 75×135×62 mm →NSK 52318 — 75×155×88 mm →NSK 52420X — 80×210×150 mm →NSK 52220 — 85×150×67 mm →NSK 52320 — 85×170×97 mm →NSK 52422X — 90×230×166 mm →NSK 52222 — 95×160×67 mm →NSK 52322X — 95×190×110 mm →NSK 52424X — 95×250×177 mm →NSK 52224 — 100×170×68 mm →NSK 52324X — 100×210×123 mm →NSK 52426X — 100×270×192 mm →NSK 52226X — 110×190×80 mm →NSK 52326X — 110×225×130 mm →NSK 52428X — 110×280×196 mm →NSK 52228X — 120×200×81 mm →NSK 52328X — 120×240×140 mm →NSK 52430X — 120×300×209 mm →NSK 52230X — 130×215×89 mm →NSK 52330X — 130×250×140 mm →NSK 52432X — 130×320×226 mm →NSK 52434X — 135×340×236 mm →NSK 52232X — 140×225×90 mm →NSK 52332X — 140×270×153 mm →NSK 52436X — 140×360×245 mm →NSK 52234X — 150×240×97 mm →NSK 52334X — 150×280×153 mm →NSK 52236X — 150×250×98 mm →NSK 52336X — 150×300×165 mm →NSK 52238X — 160×270×109 mm →NSK 52338X — 160×320×183 mm →NSK 52240X — 170×280×109 mm →NSK 52340X — 170×340×192 mm →NSK 52244X — 190×300×110 mm →
Flat seat, aligning seat and U assembly: compare the complete envelope
An aligning seat changes the housing interface. The U version includes the matching aligning seat washer, so use its total outside diameter and total height. The bearing alone and the seat-washer assembly must remain separate comparison candidates.
The corresponding ratings are read from a shared source row, but component geometry and mass are specific to each construction. A spherical seat does not provide radial capacity or an unlimited self-aligning capability.
| NSK model | Axial directions | Seat construction | Complete bore×outside×height | Mass (kg) |
|---|---|---|---|---|
| 51200 | Single | Flat | 10×26×11 mm | 0.028 |
| 53200 | Single | Aligning seat | 10×26×11.6 mm | 0.029 |
| 53200U | Single | With aligning seat washer | 10×28×13 mm | 0.036 |
| 51417X | Single | Flat | 85×180×72 mm | 8.51 |
| 53417X | Single | Aligning seat | 85×180×77 mm | 8.72 |
| 53417XU | Single | With aligning seat washer | 85×185×83 mm | 10.4 |
| 52202 | Double | Flat | 10×32×22 mm | 0.081 |
| 54202 | Double | Aligning seat | 10×32×24.6 mm | 0.09 |
| 54202U | Double | With aligning seat washer | 10×35×28 mm | 0.113 |
| 52215 | Double | Flat | 60×110×47 mm | 1.54 |
| 54215 | Double | Aligning seat | 60×110×49.6 mm | 1.66 |
| 54215U | Double | With aligning seat washer | 60×115×57 mm | 2.06 |
On a small screen, scroll the table horizontally.
Single-direction height symbols: T / T3 / T4. Double-direction height symbols: T1 / T5 / T7. With-seat-washer outside diameter is D3, not the bare bearing diameter D. Source C298–C311.
NSK 51200 — 10×26×11 mm →NSK 53200 — 10×26×11.6 mm →NSK 53200U — 10×28×13 mm →NSK 51417X — 85×180×72 mm →NSK 53417X — 85×180×77 mm →NSK 53417XU — 85×185×83 mm →NSK 52202 — 10×32×22 mm →NSK 54202 — 10×32×24.6 mm →NSK 54202U — 10×35×28 mm →NSK 52215 — 60×110×47 mm →NSK 54215 — 60×110×49.6 mm →NSK 54215U — 60×115×57 mm →
Mounting and housing dimensions: what the catalogue does and does not specify
The mounting drawing distinguishes shaft and housing abutments from the bearing boundary dimensions. A maximum fillet radius controls interference at a corner; it is not an instruction to grind the raceway or a tolerance for the housing bore.
The single-direction tables list da minimum, Da maximum and ra maximum. The double-direction tables instead list Da, ra and rb; a missing shaft abutment value must not be invented from the single-direction row.
| NSK model | Shaft bore | da min. | Da max. | ra max. | rb max. |
|---|---|---|---|---|---|
| 51100 | 10 mm | 18 mm | 16 mm | 0.3 mm | Not listed |
| 51200 | 10 mm | 20 mm | 16 mm | 0.6 mm | Not listed |
| 52202 | 10 mm | Not listed | 24 mm | 0.6 mm | 0.3 mm |
| 52422X | 90 mm | Not listed | 159 mm | 2.5 mm | 1 mm |
On a small screen, scroll the table horizontally.
- Confirm the direction(s) of the actual axial reaction and provide suitable independent radial support.
- Identify each shaft washer, housing washer and cage from the exact assembly drawing. Do not swap washers by appearance.
- For an aligning-seat version, confirm the matching spherical seating arrangement and whether the U washer is included.
- Check the total height, both seating faces, shoulder and fillet references against the complete machine drawing.
- Obtain the applicable fits, minimum axial load, lubrication, retention and start-up checks before installation.
These are catalogue geometry examples, not a housing manufacturing drawing or a complete device repair procedure. No retaining torque, fitted clearance, preload force or minimum-load value is established by this table.
How to use the chart without turning a size match into a replacement claim
A 10 mm NSK 51100 is a small metric thrust bearing, not an inch-series 1/4 in bore bearing. Likewise, these industrial tables do not identify a similarly numbered wheel hub, clutch release bearing, banded assembly or an OEM machine repair kit.
Precision angular-contact thrust bearings, needle/roller thrust bearings and plain thrust pads use different structures and rating rules. They need their own source records rather than a renamed row from this ball-thrust chart.
- Match the complete bore, outside diameter and installed height, including any aligning seat washer.
- Confirm one-direction or two-direction axial support; clockwise/anticlockwise rotation is a separate matter.
- Compare Ca and C0a as axial ratings. Do not copy them into radial-rating fields or treat them as allowed service loads.
- Check the grease/oil limiting speeds against the actual lubrication method, load and heat balance.
- Check minimum axial load to prevent slippage. The reviewed table does not provide a numerical model-specific minimum.
- Check cage/version, seats, fits, retention and the separate radial support. A size match remains a candidate until the whole application is verified.
Questions to settle before selecting a model
Can a thrust ball bearing take radial load?
No. This construction requires a separate appropriate radial support or a different combined-load bearing arrangement.
Which side faces the shaft?
Identify the shaft and housing washers from their marking and drawing; their bores and seats can differ. Do not choose by cosmetic appearance.
Does double direction mean clockwise and anticlockwise?
No. It means that axial load can be reacted in both directions along the shaft.
Is every thrust bearing a ball bearing?
No. Roller, needle, sliding-pad, fluid-film and magnetic thrust supports are different mechanisms. Use the correct family and machine instructions.
Reviewed 2026-10-01. Technical basis: NSK Thrust Ball Bearings; JTEKT Thrust Ball Bearings series overview; NSK 51104, 51105 and 51205 technical records; SKF Bearings and Mounted Products 2018: Thrust Bearings minimum load; NSK Bearing Mounting; NSK Rolling Bearings for Industrial Machinery E1103d (2025), Part C, C296–C311: full reviewed flat-seat size tables and assembly-specific seat examples. Original BearingScope explanation and checklists. General guidance is not a model-specific installation instruction or replacement approval.
Application starting points
Where this family is used
Axial shaft location with moderate loading.
Read equipment selection guides →Do not skip
Selection and interchange checks
Identify single or double direction, shaft and housing washers, minimum axial load and speed limits.
Full verification checklist →Database-backed results
1,623 recordsThrust ball bearings — actual products
First 12 records. Open all results to filter brands and technical attributes. These are search candidates, not approved replacements.
| Brand / complete designation | Type | d×D×B (mm) | Closure | Original precision | Clearance |
|---|---|---|---|---|---|
| SKF225147 M | Single direction thrust ball bearing | 25×58×— | Not reported | Not reported | Not reported |
| FAG234406-M-SP | Axial angular contact ball bearing | 30×55×32 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234407-M-SP | Axial angular contact ball bearing | 35×62×34 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234408-M-SP | Axial angular contact ball bearing | 40×68×36 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234409-M-SP | Axial angular contact ball bearing | 45×75×38 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234410-M-SP | Axial angular contact ball bearing | 50×80×38 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234411-M-SP | Axial angular contact ball bearing | 55×90×44 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234412-M-SP | Axial angular contact ball bearing | 60×95×44 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234413-M-SP | Axial angular contact ball bearing | 65×100×44 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234414-M-SP | Axial angular contact ball bearing | 70×110×48 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234415-M-SP | Axial angular contact ball bearing | 75×115×48 | Not reported | SP — Tolerance class SP | Not reported |
| FAG234416-M-SP | Axial angular contact ball bearing | 80×125×54 | Not reported | SP — Tolerance class SP | Not reported |
— = not recorded. Width conventions differ for tapered assemblies, thrust bearings and mounted units. Always inspect the dimensional drawing.
Filter all 1,623 records →All recorded subtypes in this family
Original catalogue descriptions are preserved in the records. Identical display names, including singular/plural variants, share one combined entry. Selecting a subtype opens its brand and technical filters.
Axial angular contact ball bearing245Axial deep groove ball bearings1,050Double direction thrust ball bearing42Single direction thrust ball bearing145Super-precision double direction angular contact thrust ball bearing for screw drives8Super-precision double direction angular contact thrust ball bearing for screw drives, for bolt mounting17Super-precision sealed single direction angular contact thrust ball bearing11Super-precision single direction angular contact thrust ball bearing50Super-precision, basic design double direction angular contact thrust ball bearing24Super-precision, high-speed design double direction angular contact thrust ball bearing31
No subtype matches this text.
Look up real bearing dimensions
Choose a bearing structure, then enter the dimensions you know. You can leave unknown dimensions blank. The chart contains 29,253 catalogue records whose bore, outside diameter and width or height symbols have been checked against retained manufacturer properties. It is not a complete ISO standard or an interchange list.
Changing units converts entered values; it does not reinterpret 12.7 mm as 12.7 inches. Inch fractions such as 1/2 are accepted. A blank field means unknown, not zero.
Showing the first 24 of 461 Thrust ball bearings records. Filters apply immediately.
| Brand / complete designation | Original construction | Bore d | Outside D | Width / height | Recorded closure |
|---|---|---|---|---|---|
| FAG51100 | Axial deep groove ball bearing | 10 mm | 24 mm | 9 mm (T) | Not reported |
| KOYO51100 | Axial deep groove ball bearing | 10 mm | 24 mm | 9 mm (T) | Not reported |
| FAG51200 | Axial deep groove ball bearing | 10 mm | 26 mm | 11 mm (T) | Not reported |
| KOYO51200 | Axial deep groove ball bearing | 10 mm | 26 mm | 11 mm (T) | Not reported |
| KOYO53200 | Axial deep groove ball bearing | 10 mm | 26 mm | 11.6 mm (T) | Not reported |
| KOYO53200U | Axial deep groove ball bearing | 10 mm | 26 mm | 13 mm (T) | Not reported |
| FAG51101 | Axial deep groove ball bearing | 12 mm | 26 mm | 9 mm (T) | Not reported |
| KOYO51101 | Axial deep groove ball bearing | 12 mm | 26 mm | 9 mm (T) | Not reported |
| FAG51201 | Axial deep groove ball bearing | 12 mm | 28 mm | 11 mm (T) | Not reported |
| KOYO51201 | Axial deep groove ball bearing | 12 mm | 28 mm | 11 mm (T) | Not reported |
| FAG53201 | Axial deep groove ball bearing | 12 mm | 28 mm | 11.4 mm (T) | Not reported |
| KOYO53201 | Axial deep groove ball bearing | 12 mm | 28 mm | 11.4 mm (T) | Not reported |
| KOYO53201U | Axial deep groove ball bearing | 12 mm | 28 mm | 13 mm (T) | Not reported |
| FAG51102 | Axial deep groove ball bearing | 15 mm | 28 mm | 9 mm (T) | Not reported |
| KOYO51102 | Axial deep groove ball bearing | 15 mm | 28 mm | 9 mm (T) | Not reported |
| FAG51202 | Axial deep groove ball bearing | 15 mm | 32 mm | 12 mm (T) | Not reported |
| KOYO51202 | Axial deep groove ball bearing | 15 mm | 32 mm | 12 mm (T) | Not reported |
| FAG53202 | Axial deep groove ball bearing | 15 mm | 32 mm | 13.3 mm (T) | Not reported |
| KOYO53202 | Axial deep groove ball bearing | 15 mm | 32 mm | 13.3 mm (T) | Not reported |
| KOYO53202U | Axial deep groove ball bearing | 15 mm | 32 mm | 15 mm (T) | Not reported |
| FAG51103 | Axial deep groove ball bearing | 17 mm | 30 mm | 9 mm (T) | Not reported |
| KOYO51103 | Axial deep groove ball bearing | 17 mm | 30 mm | 9 mm (T) | Not reported |
| FAG51203 | Axial deep groove ball bearing | 17 mm | 35 mm | 12 mm (T) | Not reported |
| KOYO51203 | Axial deep groove ball bearing | 17 mm | 35 mm | 12 mm (T) | Not reported |
Page 1
Read the width symbol: B, T and H are not interchangeable labels. For a tapered pair use assembly T, not the cone width. Needle designs without an inner ring may use roller-set bore Fw instead of d and are outside this d/D chart. Matched sets, housings and loose cups/cones are also excluded. Open the full product to check drawings, ratings, seals, clearance and precision.
Snapshot 2026-10-02. Every row keeps its actual product link and source-reported units; missing or ambiguous geometry is withheld. Equal nominal size alone does not approve replacement. Inch display is a conversion, rounded to six decimals, not an inch-series classification.
Bearing size charts: PDF downloads
Download searchable English tables with the brand, complete designation, source-labelled dimensions in millimetres and links to the matching model records. Choose a family or a series; the charts preserve construction differences instead of treating every size as interchangeable.
Scope: original BearingScope reference tables from our verified catalogue snapshots. These are not manufacturer manuals, CAD, full technical datasheets or a complete list of all bearing sizes. Equal dimensions do not establish interchangeability. No load ratings, tolerances or vehicle fitment are inferred.
Download PDF
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.