NSK 6834ZZS dimensions and catalogue data
NSK 6834ZZS is a catalogue designation for a single-row deep groove ball bearing. Its published boundary dimensions are 170×215×22 mm (bore d × outside diameter D × width B).
The listed dynamic radial rating Cr is 66 kN and the static radial rating C0r is 75 kN.
What this marking establishes
Shielded ZZS catalogue type. Use the full marking for comparison; equal d×D×B dimensions do not establish interchangeability.
Using these figures safely
- The listed load ratings support bearing calculations; neither value is a universal permissible operating load. Actual life also depends on load direction, speed, lubrication, contamination and installation.
- Use the speed entry for the stated closure and lubrication condition. The open-bearing oil value must not be transferred to a double-sealed or double-shielded bearing.
- The shoulder diameters and fillet radius describe adjacent shaft or housing geometry, not alternative bearing boundary dimensions. Heavy axial loads and a rotating outer ring require an application-specific check.
- Clearance class, tolerance class, grease grade and vehicle or machine fitment are not established by this table row. A sealed or shielded catalogue designation is not a complete supply specification without its grease and other required suffixes.
- Optional N/NR groove and retaining-ring dimensions are not assigned to this record. Those options require their own complete designation and installation check.
- The approximate mass printed for the base row is not presented as the measured mass of this closed variant. A dash or omitted value means not established here, not zero.
- ZZS is explicitly listed as a shielded catalogue option. No speed is inferred from the adjacent ZZ/VV speed heading for this record.
Technical basis:NSK, Rolling Bearings for Industrial Machinery, E1103d (2025), Part C, C038–C039; checked 2026-10-01. Values are independently organized as a technical reference; this page is not an official drawing or a fitment approval.
Work through a load calculation·Estimate basic rating life·Search NSK catalogue records
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Variant / construction | Single row deep groove ball bearings | |
| Bore diameter | d | 170 mm |
| Outside diameter | D | 215 mm |
| Width | B | 22 mm |
| Basic dynamic load rating | C | 66 kN |
| Basic static load rating | C0 | 75 kN |
| Sealing | Shielded ZZS catalogue type |
Mounting dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 176.5 mm |
| Maximum shaft shoulder diameter | da max. | 182 mm |
| Maximum housing shoulder diameter | Da max. | 208.5 mm |
| Maximum shaft or housing fillet radius | ra max. | 1 mm |
Boundary dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 170 mm |
| Outside diameter | D | 215 mm |
| Bearing width | B | 22 mm |
| Minimum bearing chamfer | r min. | 1.1 mm |
Construction1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Catalogue closure construction | Shielded ZZS catalogue type |
Load ratings3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 66000 N |
| Basic static radial load rating | C0r | 75000 N |
| Equivalent-load calculation factor | f0 | 17.1 |