FAG S3BC-280MM-FL

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 420.48 kg
Shaft diameterd: 280 mm / 11.024 in
Cartridge float bearing: S3BC-280MM-FL
Cartridge held bearing: S3BC-280MM-HD
Cartridge: S3C-1100
Outside diameter cartridgeLnull: 571.5 mm / 22.5 in

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	420.48 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	280 mm11.024 in
Mass	≈m	420.48 kg926.999 lbs

Dimensions16 parameters

Dimensions
Parameter	Symbol	Value
Cartridge float bearing		S3BC-280MM-FL
Cartridge held bearing		S3BC-280MM-HD
Cartridge		S3C-1100
Outside diameter cartridge	Lnull	571.5 mm22.5 in
Lenght through bore	G	357.188 mm14.062 in
Bearing float		S3B-280MM-FL
Bearing held		S3B-280MM-HD
Bearing weight		194.138 kg428 lbs
Basic dynamic load rating, radial	Cr	1,932,825.024 N434,538 lbf
Basic dynamic load rating, axial	Ca	86,153.312 N19,369 lbf
Basic static load rating, radial	C0r	3,341,840.224 N751,313 lbf
Limiting speed		870 1/min
Outside diameter bearing	D0	495.3 mm19.5 in
Width inner ring	C0	243.992 mm9.606 in
Width outer ring	B0	139.7 mm5.5 in
Grease capacity		9.979 kg22 lbs

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1988841
Brand		FAG
SAP material number		0968293380000
Base product		23051601C2

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S3BC-280MM-FL
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG S3BC-260MM-FL Plummer block housing unit

Next productFAG S3BC-300MM-FL Plummer block housing unit →