FAG S2BC-708-HD

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 156.489 kg
Shaft diameterd: 190.5 mm / 7.5 in
Cartridge float bearing: S2BC-708-FL
Cartridge held bearing: S2BC-708-HD
Cartridge: S2C-800
Outside diameter cartridgeL: 425.45 mm / 16.75 in

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	156.489 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	190.5 mm7.5 in
Mass	≈m	156.489 kg344.999 lbs

Dimensions16 parameters

Dimensions
Parameter	Symbol	Value
Cartridge float bearing		S2BC-708-FL
Cartridge held bearing		S2BC-708-HD
Cartridge		S2C-800
Outside diameter cartridge	L	425.45 mm16.75 in
Lenght through bore	G	255.587 mm10.062 in
Bearing float		S2B-708-FL
Bearing held		S2B-708-HD
Bearing weight		60.781 kg134 lbs
Basic dynamic load rating, radial	Cr	889,644.48 N200,010 lbf
Basic dynamic load rating, axial	Ca	55,604.448 N12,501 lbf
Basic static load rating, radial	C0r	1,449,585.408 N325,896 lbf
Limiting speed		1,188 1/min
Outside diameter bearing	D0	368.3 mm14.5 in
Width inner ring	C0	155.981 mm6.141 in
Width outer ring	B0	90.5 mm3.563 in
Grease capacity		2.676 kg5.9 lbs

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1988526
Brand		FAG
SAP material number		0968265500000
Base product		23051601B2

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S2BC-708-HD
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG S2BC-515-HD Plummer block housing unit

Next productFAG S2BC-715-HD Plummer block housing unit →