FAG S2B-408-FL

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 17.645 kg
Shaft diameterd: 114.3 mm / 4.5 in
Bearing float: S2B-408-FL
Bearing held: S2B-408-HD
Basic dynamic load rating, axialCa: 3,811.936 N / 857 lbf
Basic dynamic load rating, radialCr: 406,774.048 N / 91,451 lbf

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	17.645 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	114.3 mm4.5 in
Mass	≈m	17.645 kg38.901 lbs

Dimensions9 parameters

Dimensions
Parameter	Symbol	Value
Bearing float		S2B-408-FL
Bearing held		S2B-408-HD
Basic dynamic load rating, axial	Ca	3,811.936 N857 lbf
Basic dynamic load rating, radial	Cr	406,774.048 N91,451 lbf
Basic static load rating, radial	C0r	583,573.152 N131,199 lbf
Limiting speed		1,980 1/min
Outside diameter bearing	D0	228.6 mm9 in
Width inner ring	C0	100.025 mm3.938 in
Width outer ring	B0	57.15 mm2.25 in

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1988263
Brand		FAG
SAP material number		0968240930000
Base product		23051601B1

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S2B-408-FL
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG S2B-407-FL Plummer block housing unit

Next productFAG S2B-411-FL Plummer block housing unit →