FAG S1BC-608-HD

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 49.895 kg
Shaft diameterd: 165.1 mm / 6.5 in
Cartridge float bearing: S1BC-608-FL
Cartridge held bearing: S1BC-608-HD
Cartridge: S1C-608
Outside diameter cartridgeLnull: 311.15 mm / 12.25 in

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	49.895 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	165.1 mm6.5 in
Mass	≈m	49.895 kg110 lbs

Dimensions16 parameters

Dimensions
Parameter	Symbol	Value
Cartridge float bearing		S1BC-608-FL
Cartridge held bearing		S1BC-608-HD
Cartridge		S1C-608
Outside diameter cartridge	Lnull	311.15 mm12.25 in
Lenght through bore	G	192.087 mm7.562 in
Bearing float		S1B-608-FL
Bearing held		S1B-608-HD
Bearing weight		21.319 kg47 lbs
Basic dynamic load rating, radial	Cr	429,707.936 N96,607 lbf
Basic dynamic load rating, axial	Ca	35,312.672 N7,939 lbf
Basic static load rating, radial	C0r	702,712.832 N157,984 lbf
Limiting speed		1,550 1/min
Outside diameter bearing	D0	273.05 mm10.75 in
Width inner ring	C0	108.991 mm4.291 in
Width outer ring	B0	60.325 mm2.375 in
Grease capacity		0.953 kg2.1 lbs

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1988454
Brand		FAG
SAP material number		0968256000000
Base product		23051601A2

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S1BC-608-HD
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG S1BC-607-HD Plummer block housing unit

Next productFAG S1BC-611-HD Plummer block housing unit →