FAG S1BC-300MM-HD

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 171.458 kg
Shaft diameterd: 300 mm / 11.811 in
Cartridge float bearing: S1BC-300MM-FL
Cartridge held bearing: S1BC-300MM-HD
Cartridge: S1C-1200
Outside diameter cartridgeLnull: 488.95 mm / 19.25 in

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	171.458 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	300 mm11.811 in
Mass	≈m	171.458 kg378 lbs

Dimensions16 parameters

Dimensions
Parameter	Symbol	Value
Cartridge float bearing		S1BC-300MM-FL
Cartridge held bearing		S1BC-300MM-HD
Cartridge		S1C-1200
Outside diameter cartridge	Lnull	488.95 mm19.25 in
Lenght through bore	G	247.65 mm9.75 in
Bearing float		S1B-300MM-FL
Bearing held		S1B-300MM-HD
Bearing weight		55.792 kg123 lbs
Basic dynamic load rating, radial	Cr	724,169.984 N162,808 lbf
Basic dynamic load rating, axial	Ca	43,047.744 N9,678 lbf
Basic static load rating, radial	C0r	1,464,993.28 N329,360 lbf
Limiting speed		915 1/min
Outside diameter bearing	D0	438.15 mm17.25 in
Width inner ring	C0	142.875 mm5.625 in
Width outer ring	B0	74.625 mm2.938 in
Grease capacity		1.996 kg4.4 lbs

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1988471
Brand		FAG
SAP material number		0968259010000
Base product		23051601A2

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S1BC-300MM-HD
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG UKT213-J7-WOA Take-up housing unit

Next productFAG S1BC-320MM-HD Plummer block housing unit →