FAG S1BC-250MM-HD

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 102.965 kg
Shaft diameterd: 250 mm / 9.843 in
Cartridge float bearing: S1BC-250MM-FL
Cartridge held bearing: S1BC-250MM-HD
Cartridge: S1C-1000
Outside diameter cartridgeLnull: 419.1 mm / 16.5 in

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	102.965 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	250 mm9.843 in
Mass	≈m	102.965 kg226.999 lbs

Dimensions16 parameters

Dimensions
Parameter	Symbol	Value
Cartridge float bearing		S1BC-250MM-FL
Cartridge held bearing		S1BC-250MM-HD
Cartridge		S1C-1000
Outside diameter cartridge	Lnull	419.1 mm16.5 in
Lenght through bore	G	222.25 mm8.75 in
Bearing float		S1B-250MM-FL
Bearing held		S1B-250MM-HD
Bearing weight		37.195 kg82 lbs
Basic dynamic load rating, radial	Cr	601,116.064 N135,143 lbf
Basic dynamic load rating, axial	Ca	41,001.664 N9,218 lbf
Basic static load rating, radial	C0r	1,176,571.616 N264,517 lbf
Limiting speed		1,080 1/min
Outside diameter bearing	D0	374.65 mm14.75 in
Width inner ring	C0	121.996 mm4.803 in
Width outer ring	B0	66.675 mm2.625 in
Grease capacity		1.905 kg4.2 lbs

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1988439
Brand		FAG
SAP material number		0968258120000
Base product		23051601A2

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S1BC-250MM-HD
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG UKT213-J7-WOA Take-up housing unit

Next productFAG S1BC-135MM-HD Plummer block housing unit →