FAG S1B-300-FL

Plummer block housing units technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Mass≈m: 2.722 kg
Shaft diameterd: 76.2 mm / 3 in
Bearing float: S1B-300-FL
Bearing held: S1B-300-HD
Basic dynamic load rating, axialCa: 1,912.64 N / 430 lbf
Basic dynamic load rating, radialCr: 131,852.064 N / 29,643 lbf

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications1 parameter

Core specifications
Parameter	Symbol	Value
Mass	≈m	2.722 kg

Main Dimensions & Performance Data2 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Shaft diameter	d	76.2 mm3 in
Mass	≈m	2.722 kg6.001 lbs

Dimensions9 parameters

Dimensions
Parameter	Symbol	Value
Bearing float		S1B-300-FL
Bearing held		S1B-300-HD
Basic dynamic load rating, axial	Ca	1,912.64 N430 lbf
Basic dynamic load rating, radial	Cr	131,852.064 N29,643 lbf
Basic static load rating, radial	C0r	177,070.432 N39,809 lbf
Limiting speed		3,190 1/min
Outside diameter bearing	D0	133.35 mm5.25 in
Width inner ring	C0	61.214 mm2.41 in
Width outer ring	B0	31.75 mm1.25 in

Manufacturer Identity4 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		1987660
Brand		FAG
SAP material number		0968229290000
Base product		23051601A1

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		FAG split cylindrical roller bearing housing
Short Description		Plummer block housing unit

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: FAG S1B-300-FL
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← FAG S1B-215-FL Plummer block housing unit

Next productFAG S1B-303-FL Plummer block housing unit →