Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | HC6334 | |
| Bore diameter | d | 170 mm |
| Outside diameter | D | 360 mm |
| Width | B | 72 mm |
| Basic dynamic load rating | C | 325 kN |
| Basic static load rating | C0 | 395 kN |
| Fatigue load limit | Pu | 9.6 kN |
| Reference speed | nref | 2600 r/min |
| Limiting speed | nG | 3000 r/min |
| Mass | ≈m | 32.1 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | |
| Sealing | Without — Not sealed | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Material Bearing | HC | Hybrid bearing, rolling elements ceramic, bearing rings made of steel |
| Changed internal design | G | Generator bearing |
| Type of Seal | Without | Not sealed |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S1 | Rings dimensional stabilized up to 200° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 170 mm6.693 in |
| Outside diameter | D | 360 mm14.173 in |
| Width | B | 72 mm2.835 in |
| Basic dynamic load rating, radial | Cr | 325,000 N73,066.547 lbf |
| Basic static load rating, radial | C0r | 395,000 N88,803.957 lbf |
| Fatigue load limit, radial | Cur | 9,600 N2,158.273 lbf |
| Limiting speed | nG | 3,000 1/min |
| Reference speed | nϑr | 2,600 1/min |
| Mass | ≈m | 32.1 kg70.768 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 187 mm7.362 in |
| Maximum diameter of housing shoulder | Da max | 343 mm13.504 in |
| Maximum fillet radius | ra max | 3 mm0.118 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 4 mm0.157 in |
| Shoulder diameter outer ring | D1 | 296.3 mm11.665 in |
| Shoulder diameter inner ring | d1 | 235 mm9.252 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 18.7 |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Currentinsulated | Yes | |
| Largebearing | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1075498 | |
| Brand | FAG | |
| Base Type | HC6334 | |
| SAP material number | 0942215610030 | |
| Base product | 2305080101 | |
| Bearing X designation | HC6334-G-C3 | |
| Mounting Manager ID | HC6334-G-C3 | |
| Grease application ID | HC6334-G-C3 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing HC63..-G, Hybrid bearing, single row, generator bearing, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 170 mm | |
| Outside Diameter (D) | 360 mm | |
| Width (B) | 72 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 325,000 N | |
| Basic Static Load Rating, Radial (C0R) | 395,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 3,000 1/min | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Reference Speed (Nϑr) | 2,600 1/min | |
| Calculation Factor (F0) | 18.7 | |
| Fatigue Load Limit, Radial (Cur) | 9,600 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 187 mm | |
| Shoulder Diameter Inner Ring (D1) | 235 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 343 mm | |
| Minimum Chamfer Dimension (Rmin) | 4 mm | |
| Maximum Fillet Radius (Ra Max) | 3 mm | |
| Shoulder Diameter Outer Ring (D1) | 296.3 mm |
