Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | HC6319 | |
| Bore diameter | d | 95 mm |
| Outside diameter | D | 200 mm |
| Width | B | 45 mm |
| Basic dynamic load rating | C | 180 kN |
| Basic static load rating | C0 | 147 kN |
| Fatigue load limit | Pu | 4.8 kN |
| Reference speed | nref | 5300 r/min |
| Limiting speed | nG | 4700 r/min |
| Mass | ≈m | 5.375 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | |
| Sealing | 2Z — Non-contact shield on both sides | |
| Cage | JN — Steel sheet metal | |
| Lubricant | L038 — Grease (L038/customer specific) | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 150 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Material Bearing | HC | Hybrid bearing, rolling elements ceramic, bearing rings made of steel |
| Type of Seal | 2Z | Non-contact shield on both sides |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | L038 | Grease (L038/customer specific) |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 95 mm3.74 in |
| Outside diameter | D | 200 mm7.874 in |
| Width | B | 45 mm1.772 in |
| Basic dynamic load rating, radial | Cr | 180,000 N40,467.626 lbf |
| Basic static load rating, radial | C0r | 147,000 N33,048.561 lbf |
| Fatigue load limit, radial | Cur | 4,800 N1,079.137 lbf |
| Limiting speed | nG | 4,700 1/min |
| Reference speed | nϑr | 5,300 1/min |
| Mass | ≈m | 5.375 kg11.85 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 109 mm4.291 in |
| Maximum diameter of housing shoulder | Da max | 186 mm7.323 in |
| Maximum fillet radius | ra max | 2.5 mm0.098 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 3 mm0.118 in |
| Shoulder diameter outer ring | D1 | 166.88 mm6.57 in |
| Caliber diameter outer ring | D2 | 170.36 mm6.707 in |
| Shoulder diameter inner ring | d1 | 128.7 mm5.067 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 18 |
Capabilities & suitability7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes | |
| Currentinsulated | Yes |
Manufacturer Identity7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1296082 | |
| Brand | FAG | |
| Base Type | HC6319 | |
| SAP material number | 0928099600030 | |
| Base product | 2305080101 | |
| Bearing X designation | HC6319-2Z-L038-C3 | |
| Mounting Manager ID | HC6319-2Z-L038-C3 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing HC63..-2Z, Hybrid bearing, single row, shields, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 95 mm | |
| Outside Diameter (D) | 200 mm | |
| Width (B) | 45 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 180,000 N | |
| Basic Static Load Rating, Radial (C0R) | 147,000 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 4,700 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Reference Speed (Nϑr) | 5,300 1/min | |
| Calculation Factor (F0) | 18 | |
| Fatigue Load Limit, Radial (Cur) | 4,800 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 109 mm | |
| Shoulder Diameter Inner Ring (D1) | 128.7 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 186 mm | |
| Minimum Chamfer Dimension (Rmin) | 3 mm | |
| Maximum Fillet Radius (Ra Max) | 2.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 166.88 mm | |
| Caliber Diameter Outer Ring (D1) | 170.36 mm |
