Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | F608 | |
| Bore diameter | d | 8 mm |
| Outside diameter | D | 22 mm |
| Width | B | 7 mm |
| Basic dynamic load rating | C | 3.3 kN |
| Basic static load rating | C0 | 1.37 kN |
| Fatigue load limit | Pu | 0.0415 kN |
| Reference speed | nref | 31500 r/min |
| Limiting speed | nG | 40000 r/min |
| Mass | ≈m | 0.0142 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | 2Z — Non-contact shield on both sides | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Lubricating grease | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Cage | JN | Steel sheet metal |
| Design, bearing outer ring | F | Flange |
| Type of Seal | 2Z | Non-contact shield on both sides |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Lubricating grease | |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 8 mm0.315 in |
| Outside diameter | D | 22 mm0.866 in |
| Width | B | 7 mm0.276 in |
| Basic dynamic load rating, radial | Cr | 3,300 N741.906 lbf |
| Basic static load rating, radial | C0r | 1,370 N308.004 lbf |
| Fatigue load limit, radial | Cur | 41.5 N9.33 lbf |
| Limiting speed | nG | 40,000 1/min |
| Reference speed | nϑr | 31,500 1/min |
| Mass | ≈m | 14.2 g0.501 oz |
Dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 0.3 mm0.012 in |
| Shoulder diameter outer ring | D1 | 18 mm0.709 in |
| Caliber diameter outer ring | D2 | 19.03 mm0.749 in |
| Shoulder diameter inner ring | d1 | 12.14 mm0.478 in |
| Caliber diameter inner ring | d2 | 10.5 mm0.413 in |
| Width flange | Bf | 1.5 mm0.059 in |
| Outer diameter flange | Df | 25 mm0.984 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 12.4 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 357085 | |
| Brand | FAG | |
| Base Type | F608 | |
| SAP material number | 0554755310000 | |
| Base product | 2305080103 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing F60..-2Z, single row, with flange, shields, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 8 mm | |
| Outside Diameter (D) | 22 mm | |
| Width (B) | 7 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 3,300 N | |
| Basic Static Load Rating, Radial (C0R) | 1,370 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 40,000 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 31,500 1/min | |
| Calculation Factor (F0) | 12.4 | |
| Width Flange (Bf) | 1.5 mm | |
| Outer Diameter Flange (Df) | 25 mm | |
| Fatigue Load Limit, Radial (Cur) | 41.5 N | |
| Shoulder Diameter Inner Ring (D1) | 12.14 mm | |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | |
| Caliber Diameter Inner Ring (D1) | 10.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 18 mm | |
| Caliber Diameter Outer Ring (D1) | 19.03 mm |
