Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications15 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 7006 | |
| Bore diameter | d | 30 mm |
| Outside diameter | D | 55 mm |
| Width | B | 13 mm |
| Basic dynamic load rating | C | 19.9 kN |
| Basic static load rating | C0 | 13.4 kN |
| Fatigue load limit | Pu | 0.93 kN |
| Limiting speed | nG | 6900 r/min |
| Mass | ≈m | 0.115 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Sealing | 2RS — Contact seal on both sides | |
| Cage | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | |
| Lubricant | L454 — Grease (L454/customer specific) | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | |
| Type of Seal | 2RS | Contact seal on both sides |
| Cage | TVP | Solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | L454 | Grease (L454/customer specific) |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 30 mm1.181 in |
| Outside diameter | D | 55 mm2.165 in |
| Width | B | 13 mm0.512 in |
| Basic dynamic load rating, radial | Cr | 19,900 N4,473.921 lbf |
| Basic static load rating, radial | C0r | 13,400 N3,012.59 lbf |
| Fatigue load limit, radial | Cur | 930 N209.083 lbf |
| Limiting speed | nG | 6,900 1/min |
| Mass | ≈m | 0.115 kg0.254 lbs |
Mounting dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter of shaft shoulder | da min | 34.6 mm1.362 in |
| Maximum diameter of housing shoulder | Da max | 50.4 mm1.984 in |
| Maximum diameter of housing shoulder | Db max | 51.8 mm2.039 in |
| Maximum fillet radius of shaft | ra max | 1 mm0.039 in |
| Maximum fillet radius of housing | ra1 max | 0.6 mm0.024 in |
Dimensions9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1 mm0.039 in |
| Minimum chamfer dimension | r1 min | 0.6 mm0.024 in |
| Shoulder diameter on outer ring wide side face | D1 | 47.05 mm1.852 in |
| Caliber diameter on outer ring wide side face | D2 | 47.7 mm1.878 in |
| Caliber diameter on outer ring small side face | D3 | 51.93 mm2.044 in |
| Shoulder diameter on inner ring wide side face | d1 | 41.26 mm1.624 in |
| Caliber diameter on inner ring wide side face | d2 | 38.04 mm1.498 in |
| Distance between the apexes of the pressure cones | a | 24.9 mm0.98 in |
| Contact angle | α | 40 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 360217 | |
| Brand | FAG | |
| Base Type | 7006 | |
| X Life Marking | XL | |
| SAP material number | 0805508000000 | |
| Base product | 2305080301 | |
| Bearing X designation | 7006-B-XL-2RS-FKM-TVP-L454 | |
| Mounting Manager ID | 7006-B-XL-2RS-FKM-TVP-L454 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 70..-B-XL-2RS-TVP, single row, X-life, seals, plastic cage | |
| Short Description | Angular contact ball bearing |
Technical Data23 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 30 mm | |
| Outside Diameter (D) | 55 mm | |
| Width (B) | 13 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 19,900 N | |
| Basic Static Load Rating, Radial (C0R) | 13,400 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 6,900 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Caliber Diameter On Outer Ring Small Side Face (D3) | 51.93 mm | |
| Caliber Diameter Outer Ring (D2) | 47.7 mm | |
| Maximum Diameter Of Housing Shoulder (Db Max) | 51.8 mm | |
| Fatigue Load Limit, Radial (Cur) | 930 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 34.6 mm | |
| Shoulder Diameter Inner Ring (D1) | 41.26 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 50.4 mm | |
| Minimum Chamfer Dimension (Rmin) | 1 mm | |
| Caliber Diameter Inner Ring (D1) | 38.04 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.6 mm | |
| Shoulder Diameter Outer Ring (D1) | 47.05 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | |
| Contact Angle (Α) | 40 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 24.9 mm |