Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6322 | |
| Bore diameter | d | 110 mm |
| Outside diameter | D | 240 mm |
| Width | B | 50 mm |
| Basic dynamic load rating | C | 201 kN |
| Basic static load rating | C0 | 165 kN |
| Fatigue load limit | Pu | 8.8 kN |
| Reference speed | nref | 4150 r/min |
| Limiting speed | nG | 3250 r/min |
| Mass | ≈m | 9.981 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | 2Z — Non-contact shield on both sides | |
| Cage | JN — Steel sheet metal | |
| Lubricant | GA13 — Ball bearing and insert bearing grease | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | 2Z | Non-contact shield on both sides |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | GA13 | Ball bearing and insert bearing grease |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 110 mm4.331 in |
| Outside diameter | D | 240 mm9.449 in |
| Width | B | 50 mm1.969 in |
| Basic dynamic load rating, radial | Cr | 201,000 N45,188.849 lbf |
| Basic static load rating, radial | C0r | 165,000 N37,095.324 lbf |
| Fatigue load limit, radial | Cur | 8,800 N1,978.417 lbf |
| Limiting speed | nG | 3,250 1/min |
| Reference speed | nϑr | 4,150 1/min |
| Mass | ≈m | 9.981 kg22.004 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 124 mm4.882 in |
| Maximum diameter of housing shoulder | Da max | 226 mm8.898 in |
| Maximum fillet radius | ra max | 2.5 mm0.098 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 3 mm0.118 in |
| Shoulder diameter outer ring | D1 | 197.54 mm7.777 in |
| Caliber diameter outer ring | D2 | 203.14 mm7.998 in |
| Shoulder diameter inner ring | d1 | 152.85 mm6.018 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 13.8 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 351974 | |
| Brand | FAG | |
| Base Type | 6322 | |
| Old Designation | ["6322.2ZR","6322.2Z"] | |
| X Life Marking | n.r. | |
| SAP material number | 0191117700000 | |
| Base product | 2305080101 | |
| Bearing X designation | 6322-2Z | |
| Mounting Manager ID | 6322-2Z |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 63..-2Z, single row, shields, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 110 mm | |
| Outside Diameter (D) | 240 mm | |
| Width (B) | 50 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 201,000 N | |
| Basic Static Load Rating, Radial (C0R) | 165,000 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 3,250 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 4,150 1/min | |
| Calculation Factor (F0) | 13.8 | |
| Fatigue Load Limit, Radial (Cur) | 8,800 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 124 mm | |
| Shoulder Diameter Inner Ring (D1) | 152.85 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 226 mm | |
| Minimum Chamfer Dimension (Rmin) | 3 mm | |
| Maximum Fillet Radius (Ra Max) | 2.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 197.54 mm | |
| Caliber Diameter Outer Ring (D1) | 203.14 mm |
