Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6313 | |
| Bore diameter | d | 65 mm |
| Outside diameter | D | 140 mm |
| Width | B | 33 mm |
| Basic dynamic load rating | C | 97.5 kN |
| Basic static load rating | C0 | 60 kN |
| Fatigue load limit | Pu | 3.6 kN |
| Limiting speed | nG | 3000 r/min |
| Mass | ≈m | 2.13 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | |
| Sealing | 2RSR — Contact seal on both sides | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Lubricating grease | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Version code | >N | Not marked on bearing |
| Changed internal design | H | Design variant H (H-Series) |
| Type of Seal | 2RSR | Contact seal on both sides |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Lubricating grease | |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 65 mm2.559 in |
| Outside diameter | D | 140 mm5.512 in |
| Width | B | 33 mm1.299 in |
| Basic dynamic load rating, radial | Cr | 97,500 N21,919.964 lbf |
| Basic static load rating, radial | C0r | 60,000 N13,489.209 lbf |
| Fatigue load limit, radial | Cur | 3,600 N809.353 lbf |
| Limiting speed | nG | 3,000 1/min |
| Mass | ≈m | 2.13 kg4.696 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 77 mm3.031 in |
| Maximum diameter of housing shoulder | Da max | 128 mm5.039 in |
| Maximum fillet radius | ra max | 2.1 mm0.083 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Shoulder diameter outer ring | D1 | 116.9 mm4.602 in |
| Caliber diameter outer ring | D2 | 121.2 mm4.772 in |
| Shoulder diameter inner ring | d1 | 88.1 mm3.469 in |
| Caliber diameter inner ring | d2 | 85.6 mm3.37 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 13.2 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2573773 | |
| Brand | FAG | |
| Base Type | 6313 | |
| SAP material number | 3003964140030 | |
| Base product | 2305080101 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 63..-H-2RSR, single row, H-Series, seals, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 65 mm | |
| Outside Diameter (D) | 140 mm | |
| Width (B) | 33 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 97,500 N | |
| Basic Static Load Rating, Radial (C0R) | 60,000 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 3,000 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Calculation Factor (F0) | 13.2 | |
| Fatigue Load Limit, Radial (Cur) | 3,600 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 77 mm | |
| Shoulder Diameter Inner Ring (D1) | 88.1 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 128 mm | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Caliber Diameter Inner Ring (D1) | 85.6 mm | |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | |
| Shoulder Diameter Outer Ring (D1) | 116.9 mm | |
| Caliber Diameter Outer Ring (D1) | 121.2 mm |
