Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6313 | |
| Bore diameter | d | 65 mm |
| Outside diameter | D | 140 mm |
| Width | B | 33 mm |
| Basic dynamic load rating | C | 101 kN |
| Basic static load rating | C0 | 60 kN |
| Fatigue load limit | Pu | 4.1 kN |
| Reference speed | nref | 7000 r/min |
| Limiting speed | nG | 6200 r/min |
| Mass | ≈m | 2.08 kg |
| Precision class | P6 — Class 6 (ISO 492:2023) | |
| Internal clearance | C4 (Group 4) — Internal clearance larger than C3 | |
| Sealing | 2Z — Non-contact shield on both sides | |
| Cage | JN — Steel sheet metal | |
| Lubricant | L207 — Low noise high-temperature grease, interchangeable with grease L069 | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 150 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 3Derived from ISO P6; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Changed internal design | C | GenerationC |
| Type of Seal | 2Z | Non-contact shield on both sides |
| Cage | JN | Steel sheet metal |
| Tolerance class | P6 | Class 6 (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | L207 | Low noise high-temperature grease, interchangeable with grease L069 |
| Radial internal clearance | C4 (Group 4) | Internal clearance larger than C3 |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 65 mm2.559 in |
| Outside diameter | D | 140 mm5.512 in |
| Width | B | 33 mm1.299 in |
| Basic dynamic load rating, radial | Cr | 101,000 N22,706.835 lbf |
| Basic static load rating, radial | C0r | 60,000 N13,489.209 lbf |
| Fatigue load limit, radial | Cur | 4,100 N921.763 lbf |
| Limiting speed | nG | 6,200 1/min |
| Reference speed | nϑr | 7,000 1/min |
| Mass | ≈m | 2.08 kg4.586 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 77 mm3.031 in |
| Maximum diameter of housing shoulder | Da max | 128 mm5.039 in |
| Maximum fillet radius | ra max | 2.1 mm0.083 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Shoulder diameter outer ring | D1 | 118.22 mm4.654 in |
| Caliber diameter outer ring | D2 | 121.4 mm4.78 in |
| Shoulder diameter inner ring | d1 | 87.73 mm3.454 in |
| Caliber diameter inner ring | d2 | 85.59 mm3.37 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 13.2 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 355975 | |
| Brand | FAG | |
| Base Type | 6313 | |
| X Life Marking | C | |
| SAP material number | 0933456740040 | |
| Base product | 2305080101 | |
| Bearing X designation | 6313-C-2Z-L207-C4 | |
| Mounting Manager ID | 6313-C-2Z-L207-C4 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 63..-C-2Z, single row, Generation C, shields, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data19 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 65 mm | |
| Outside Diameter (D) | 140 mm | |
| Width (B) | 33 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 101,000 N | |
| Basic Static Load Rating, Radial (C0R) | 60,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 6,200 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Reference Speed (Nϑr) | 7,000 1/min | |
| Calculation Factor (F0) | 13.2 | |
| Fatigue Load Limit, Radial (Cur) | 4,100 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 77 mm | |
| Shoulder Diameter Inner Ring (D1) | 87.73 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 128 mm | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Caliber Diameter Inner Ring (D1) | 85.59 mm | |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | |
| Shoulder Diameter Outer Ring (D1) | 118.22 mm | |
| Caliber Diameter Outer Ring (D1) | 121.4 mm |
