Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6305 | |
| Bore diameter | d | 25 mm |
| Outside diameter | D | 62 mm |
| Width | B | 17 mm |
| Basic dynamic load rating | C | 22.41 kN |
| Basic static load rating | C0 | 11.51 kN |
| Fatigue load limit | Pu | 0.71 kN |
| Reference speed | nref | 12300 r/min |
| Limiting speed | nG | 16100 r/min |
| Mass | ≈m | 0.237 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | Z — Non-contact shield on one Side | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Version code | >N | Not marked on bearing |
| Changed internal design | H | Design variant H (H-Series) |
| Type of Seal | Z | Non-contact shield on one Side |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 25 mm0.984 in |
| Outside diameter | D | 62 mm2.441 in |
| Width | B | 17 mm0.669 in |
| Basic dynamic load rating, radial | Cr | 22,410 N5,038.219 lbf |
| Basic static load rating, radial | C0r | 11,510 N2,587.68 lbf |
| Fatigue load limit, radial | Cur | 710 N159.622 lbf |
| Limiting speed | nG | 16,100 1/min |
| Reference speed | nϑr | 12,300 1/min |
| Mass | ≈m | 0.237 kg0.522 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 32 mm1.26 in |
| Maximum diameter of housing shoulder | Da max | 55 mm2.165 in |
| Maximum fillet radius | ra max | 1 mm0.039 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm0.043 in |
| Shoulder diameter outer ring | D1 | 51 mm2.008 in |
| Caliber diameter outer ring | D2 | 53 mm2.087 in |
| Shoulder diameter inner ring | d1 | 36 mm1.417 in |
| Caliber diameter inner ring | d2 | 33.8 mm1.331 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 12.4 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Sealedononeside | Yes |
Manufacturer Identity5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2871097 | |
| Brand | FAG | |
| Base Type | 6305 | |
| SAP material number | 3016796300000 | |
| Base product | 2305080101 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 63..-H-Z, single row, shield , steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data19 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 25 mm | |
| Outside Diameter (D) | 62 mm | |
| Width (B) | 17 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 22,410 N | |
| Basic Static Load Rating, Radial (C0R) | 11,510 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 16,100 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 12,300 1/min | |
| Calculation Factor (F0) | 12.4 | |
| Fatigue Load Limit, Radial (Cur) | 710 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 32 mm | |
| Shoulder Diameter Inner Ring (D1) | 36 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 55 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | |
| Caliber Diameter Inner Ring (D1) | 33.8 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 51 mm | |
| Caliber Diameter Outer Ring (D1) | 53 mm |
