Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6215 | |
| Bore diameter | d | 75 mm |
| Outside diameter | D | 130 mm |
| Width | B | 25 mm |
| Basic dynamic load rating | C | 60.68 kN |
| Basic static load rating | C0 | 45.47 kN |
| Fatigue load limit | Pu | 2.6 kN |
| Limiting speed | nG | 2850 r/min |
| Mass | ≈m | 1.18 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | 2RSR — Contact seal on both sides | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Lubricating grease | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Version code | >N | Not marked on bearing |
| Changed internal design | H | Design variant H (H-Series) |
| Type of Seal | 2RSR | Contact seal on both sides |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Lubricating grease | |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 75 mm2.953 in |
| Outside diameter | D | 130 mm5.118 in |
| Width | B | 25 mm0.984 in |
| Basic dynamic load rating, radial | Cr | 60,680 N13,642.086 lbf |
| Basic static load rating, radial | C0r | 45,470 N10,222.572 lbf |
| Fatigue load limit, radial | Cur | 2,600 N584.532 lbf |
| Limiting speed | nG | 2,850 1/min |
| Mass | ≈m | 1.18 kg2.601 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 84 mm3.307 in |
| Maximum diameter of housing shoulder | Da max | 121 mm4.764 in |
| Maximum fillet radius | ra max | 1.5 mm0.059 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Shoulder diameter outer ring | D1 | 113 mm4.449 in |
| Caliber diameter outer ring | D2 | 117.7 mm4.634 in |
| Shoulder diameter inner ring | d1 | 92 mm3.622 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 14.9 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2633284 | |
| Brand | FAG | |
| Base Type | 6215 | |
| SAP material number | 3015315790000 | |
| Base product | 2305080101 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 62..-H-2RSR, single row, H-Series, seals, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 75 mm | |
| Outside Diameter (D) | 130 mm | |
| Width (B) | 25 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 60,680 N | |
| Basic Static Load Rating, Radial (C0R) | 45,470 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 2,850 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Calculation Factor (F0) | 14.9 | |
| Fatigue Load Limit, Radial (Cur) | 2,600 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 84 mm | |
| Shoulder Diameter Inner Ring (D1) | 92 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 121 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 113 mm | |
| Caliber Diameter Outer Ring (D1) | 117.7 mm |