Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6208 | |
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
| Basic dynamic load rating | C | 31 kN |
| Basic static load rating | C0 | 17.8 kN |
| Fatigue load limit | Pu | 1.08 kN |
| Limiting speed | nG | 5000 r/min |
| Mass | ≈m | 0.37 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | RSR — Contact seal on one side | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | RSR | Contact seal on one side |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 40 mm1.575 in |
| Outside diameter | D | 80 mm3.15 in |
| Width | B | 18 mm0.709 in |
| Basic dynamic load rating, radial | Cr | 31,000 N6,969.424 lbf |
| Basic static load rating, radial | C0r | 17,800 N4,001.799 lbf |
| Fatigue load limit, radial | Cur | 1,080 N242.806 lbf |
| Limiting speed | nG | 5,000 1/min |
| Mass | ≈m | 0.37 kg0.816 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 47 mm1.85 in |
| Maximum diameter of housing shoulder | Da max | 73 mm2.874 in |
| Maximum fillet radius | ra max | 1 mm0.039 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm0.043 in |
| Shoulder diameter outer ring | D1 | 67.6 mm2.661 in |
| Caliber diameter outer ring | D2 | 70.36 mm2.77 in |
| Shoulder diameter inner ring | d1 | 52.95 mm2.085 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 14 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Sealedononeside | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 354576 | |
| Brand | FAG | |
| Base Type | 6208 | |
| SAP material number | 0191033790000 | |
| Base product | 2305080101 | |
| Bearing X designation | 6208-RSR | |
| Mounting Manager ID | 6208-RSR | |
| Grease application ID | 6208-RSR |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 62..-RSR, single row, seal, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 40 mm | |
| Outside Diameter (D) | 80 mm | |
| Width (B) | 18 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 31,000 N | |
| Basic Static Load Rating, Radial (C0R) | 17,800 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 5,000 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Calculation Factor (F0) | 14 | |
| Fatigue Load Limit, Radial (Cur) | 1,080 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 47 mm | |
| Shoulder Diameter Inner Ring (D1) | 52.95 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 73 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 67.6 mm | |
| Caliber Diameter Outer Ring (D1) | 70.36 mm |