Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 68 mm |
| Width | B | 12 mm |
| Basic dynamic load rating | C | 15 kN |
| Basic static load rating | C0 | 10.9 kN |
| Fatigue load limit | Pu | 0.65 kN |
| Reference speed | nref | 8800 r/min |
| Limiting speed | nG | 14400 r/min |
| Mass | ≈m | 0.136 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | Without — Not sealed | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 45 mm1.772 in |
| Outside diameter | D | 68 mm2.677 in |
| Width | B | 12 mm0.472 in |
| Basic dynamic load rating, radial | Cr | 15,000 N3,372.302 lbf |
| Basic static load rating, radial | C0r | 10,900 N2,450.54 lbf |
| Fatigue load limit, radial | Cur | 650 N146.133 lbf |
| Limiting speed | nG | 14,400 1/min |
| Reference speed | nϑr | 8,800 1/min |
| Mass | ≈m | 0.136 kg0.3 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 48.2 mm1.898 in |
| Maximum diameter of housing shoulder | Da max | 64.8 mm2.551 in |
| Maximum fillet radius | ra max | 0.6 mm0.024 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 0.6 mm0.024 in |
| Shoulder diameter outer ring | D1 | 60.74 mm2.391 in |
| Shoulder diameter inner ring | d1 | 52.4 mm2.063 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 16 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 350574 | |
| Brand | FAG | |
| Base Type | 61909 | |
| X Life Marking | n.r. | |
| SAP material number | 0097866190000 | |
| Base product | 2305080101 | |
| Bearing X designation | 61909 | |
| Mounting Manager ID | 61909 | |
| Grease application ID | 61909 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 619, single row, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 45 mm | |
| Outside Diameter (D) | 68 mm | |
| Width (B) | 12 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 15,000 N | |
| Basic Static Load Rating, Radial (C0R) | 10,900 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 14,400 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 8,800 1/min | |
| Calculation Factor (F0) | 16 | |
| Fatigue Load Limit, Radial (Cur) | 650 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 48.2 mm | |
| Shoulder Diameter Inner Ring (D1) | 52.4 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 64.8 mm | |
| Minimum Chamfer Dimension (Rmin) | 0.6 mm | |
| Maximum Fillet Radius (Ra Max) | 0.6 mm | |
| Shoulder Diameter Outer Ring (D1) | 60.74 mm |
