Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications17 parameters

Core specifications
Parameter	Symbol	Value
Series		609
Bore diameter	d	9 mm
Outside diameter	D	24 mm
Width	B	7 mm
Basic dynamic load rating	C	3.55 kN
Basic static load rating	C0	1.41 kN
Fatigue load limit	Pu	0.088 kN
Reference speed	nref	30000 r/min
Limiting speed	nG	45500 r/min
Mass	≈m	0.015 kg
Precision class		PN — Normal (ISO 492:2023)
Internal clearance		CN (Group N) — Normal internal clearance
Sealing		Without — Not sealed
Cage		JN — Steel sheet metal
Lubricant		Without — Bearing not greased
Minimum operating temperature	Tmin	-30 °C
Maximum operating temperature	Tmax	120 °C

Precision classification2 parameters

Precision classification
Parameter	Symbol	Value
Radial ball bearing tolerance equivalent		ABEC 1Derived from ISO Normal; not a direct ABEC marking
Mapping basis		ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value.

Product characteristics7 parameters

Product characteristics
Parameter	Symbol	Value
Type of Seal	Without	Not sealed
Cage	JN	Steel sheet metal
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	SN	Rings dimensional stabilized up to 120°
Lubricant	Without	Bearing not greased
Radial internal clearance	CN (Group N)	Normal internal clearance
Bore type	Z	Cylindrical

Main Dimensions & Performance Data9 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Bore diameter	d	9 mm0.354 in
Outside diameter	D	24 mm0.945 in
Width	B	7 mm0.276 in
Basic dynamic load rating, radial	Cr	3,550 N798.112 lbf
Basic static load rating, radial	C0r	1,410 N316.996 lbf
Fatigue load limit, radial	Cur	88 N19.784 lbf
Limiting speed	nG	45,500 1/min
Reference speed	nϑr	30,000 1/min
Mass	≈m	0.015 kg0.033 lbs

Mounting dimensions3 parameters

Mounting dimensions
Parameter	Symbol	Value
Minimum diameter shaft shoulder	da min	11 mm0.433 in
Maximum diameter of housing shoulder	Da max	22 mm0.866 in
Maximum fillet radius	ra max	0.3 mm0.012 in

Dimensions5 parameters

Dimensions
Parameter	Symbol	Value
Minimum chamfer dimension	rmin	0.3 mm0.012 in
Shoulder diameter outer ring	D1	19 mm0.748 in
Caliber diameter outer ring	D2	20.1 mm0.791 in
Shoulder diameter inner ring	d1	13.2 mm0.52 in
Caliber diameter inner ring	d2	12.2 mm0.48 in

Temperature range2 parameters

Temperature range
Parameter	Symbol	Value
Operating temperature min.	Tmin	-30 °C-22 °F
Operating temperature max.	Tmax	120 °C248 °F

Calculation factors1 parameter

Calculation factors
Parameter	Symbol	Value
Calculation factor	f0	12.8

Capabilities & suitability6 parameters

Capabilities & suitability
Parameter	Symbol	Value
Radial load capacity		Yes
Axial load capacity in one direction		Yes
Axial load capacity in both directions		Yes
Suitable for grease lubrication		Yes
Suitable for oil lubrication		Yes
Unsealed design		Yes

Manufacturer Identity5 parameters

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		Deep groove ball bearing 60, single row, steel sheet metal cage
Short Description		Deep groove ball bearing

Technical Data19 parameters

Technical Data
Parameter	Symbol	Value
Bore Diameter (D)		9 mm
Outside Diameter (D)		24 mm
Width (B)		7 mm
Basic Dynamic Load Rating, Radial (Cr)		3,550 N
Basic Static Load Rating, Radial (C0R)		1,410 N
Operating Temperature Min. (Tmin)		-30 °C
Limiting Speed (Ng)		45,500 1/min
Operating Temperature Max. (Tmax)		120 °C
Reference Speed (Nϑr)		30,000 1/min
Calculation Factor (F0)		12.8
Fatigue Load Limit, Radial (Cur)		88 N
Minimum Diameter Shaft Shoulder (Da Min)		11 mm
Shoulder Diameter Inner Ring (D1)		13.2 mm
Maximum Diameter Of Housing Shoulder (Da Max)		22 mm
Minimum Chamfer Dimension (Rmin)		0.3 mm
Caliber Diameter Inner Ring (D1)		12.2 mm
Maximum Fillet Radius (Ra Max)		0.3 mm
Shoulder Diameter Outer Ring (D1)		19 mm
Caliber Diameter Outer Ring (D1)		20.1 mm

FAG 609-HLN