Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 6020 | |
| Bore diameter | d | 100 mm |
| Outside diameter | D | 150 mm |
| Width | B | 24 mm |
| Basic dynamic load rating | C | 64 kN |
| Basic static load rating | C0 | 54 kN |
| Fatigue load limit | Pu | 3.05 kN |
| Limiting speed | nG | 2300 r/min |
| Mass | ≈m | 1.235 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | RSR — Contact seal on one side | |
| Cage | JN — Steel sheet metal | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | RSR | Contact seal on one side |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 100 mm3.937 in |
| Outside diameter | D | 150 mm5.906 in |
| Width | B | 24 mm0.945 in |
| Basic dynamic load rating, radial | Cr | 64,000 N14,388.489 lbf |
| Basic static load rating, radial | C0r | 54,000 N12,140.288 lbf |
| Fatigue load limit, radial | Cur | 3,050 N685.701 lbf |
| Limiting speed | nG | 2,300 1/min |
| Mass | ≈m | 1.235 kg2.723 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 107 mm4.213 in |
| Maximum diameter of housing shoulder | Da max | 143 mm5.63 in |
| Maximum fillet radius | ra max | 1.5 mm0.059 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Shoulder diameter outer ring | D1 | 134.12 mm5.28 in |
| Caliber diameter outer ring | D2 | 137.3 mm5.406 in |
| Shoulder diameter inner ring | d1 | 116.2 mm4.575 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 15.8 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Sealedononeside | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 349994 | |
| Brand | FAG | |
| Base Type | 6020 | |
| Old Designation | ["6020RSR"] | |
| X Life Marking | n.r. | |
| SAP material number | 0190946980000 | |
| Base product | 2305080101 | |
| Bearing X designation | 6020-RSR | |
| Mounting Manager ID | 6020-RSR | |
| Grease application ID | 6020-RSR |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 60..-RSR, single row, seal, steel sheet metal cage | |
| Short Description | Deep groove ball bearing |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 100 mm | |
| Outside Diameter (D) | 150 mm | |
| Width (B) | 24 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 64,000 N | |
| Basic Static Load Rating, Radial (C0R) | 54,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 2,300 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Calculation Factor (F0) | 15.8 | |
| Fatigue Load Limit, Radial (Cur) | 3,050 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 107 mm | |
| Shoulder Diameter Inner Ring (D1) | 116.2 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 143 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 134.12 mm | |
| Caliber Diameter Outer Ring (D1) | 137.3 mm |