Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications10 parameters

Core specifications
Parameter	Symbol	Value
Bore diameter	d	80 mm
Outside diameter	D	140 mm
Width	B	47.6 mm
Reference speed	nref	4450 r/min
Limiting speed	nG	2460 r/min
Mass	≈m	2.756 kg
Precision class		PN — Normal (ISO 492:2023)
Cage		JP — Steel sheet metal
Minimum operating temperature	Tmin	-30 °C
Maximum operating temperature	Tmax	150 °C

Product characteristics3 parameters

Product characteristics
Parameter	Symbol	Value
Cage	JP	Steel sheet metal
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	S0	Rings dimensional stabilized up to 150°

Main Dimensions & Performance Data9 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Inner diameter shaft washer	d	80 mm3.15 in
Outer diameter housing washer	D	140 mm5.512 in
Height	T	47.6 mm1.874 in
Basic dynamic load rating, axial	Ca	160,000 N35,971.223 lbf
Basic static load rating, axial	C0a	360,000 N80,935.252 lbf
Fatigue load limit, axial	Cua	15,500 N3,484.712 lbf
Limiting speed	nG	2,460 1/min
Reference speed	nϑr	4,450 1/min
Mass	≈m	2.756 kg6.076 lbs

Mounting dimensions3 parameters

Mounting dimensions
Parameter	Symbol	Value
Minimum diameter shaft shoulder	da min	116 mm4.567 in
Maximum diameter of housing shoulder	Da max	110 mm4.331 in
Maximum filled radius	ra max	1.5 mm0.059 in

Dimensions9 parameters

Dimensions
Parameter	Symbol	Value
Minimum chamfer dimension	rmin	1.5 mm0.059 in
Inner diameter housing washer	D1	82 mm3.228 in
Outer diameter shaft washer	d1	140 mm5.512 in
Radius spherical housing washer	R	112 mm4.409 in
Distance of the center point	A	50 mm1.969 in
Height with seat washer	T1	52 mm2.047 in
Bore diameter seat washer	D2	110 mm4.331 in
Outside diameter seat washer	D3	145 mm5.709 in
Height seat washer	C	15 mm0.591 in

Temperature range2 parameters

Temperature range
Parameter	Symbol	Value
Operating temperature min.	Tmin	-30 °C-22 °F
Operating temperature max.	Tmax	150 °C302 °F

Calculation factors1 parameter

Calculation factors
Parameter	Symbol	Value
Minimum load factor	A	0.79

Capabilities & suitability5 parameters

Capabilities & suitability
Parameter	Symbol	Value
Axial load capacity in one direction		Yes
Suitable for grease lubrication		Yes
Suitable for oil lubrication		Yes
Unsealed design		Yes
Staticangularerrorandmisalignment		Yes

Manufacturer Identity9 parameters

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		Axial deep groove ball bearing 533, single direction, with spherical housing washer, steel sheet metal cage
Short Description		Axial deep groove ball bearing

Additional information1 parameter

Additional information
Parameter	Symbol	Value
Seat washer		U316

Technical Data23 parameters

Technical Data
Parameter	Symbol	Value
Bore Diameter (D)		80 mm
Outside Diameter (D)		140 mm
Width (B)		47.6 mm
Basic Dynamic Load Rating, Axial (Ca)		160,000 N
Basic Static Load Rating, Axial (C0A)		360,000 N
Operating Temperature Min. (Tmin)		-30 °C
Limiting Speed (Ng)		2,460 1/min
Operating Temperature Max. (Tmax)		150 °C
Reference Speed (Nϑr)		4,450 1/min
Bore Diameter Seat Washer (D2)		110 mm
Height Seat Washer (C)		15 mm
Minimum Diameter Shaft Shoulder (Da Min)		116 mm
Minimum Load Factor (A)		0.79
Outside Diameter Seat Washer (D3)		145 mm
Rip Diameter Shaft Washer (D1)		140 mm
Distance Of The Center Point (A)		50 mm
Bore Diameter Housing Washer (D1)		82 mm
Maximum Diameter Of Housing Shoulder (Da Max)		110 mm
Minimum Chamfer Dimension (Rmin)		1.5 mm
Height With Seat Washer (T1)		52 mm
Maximum Fillet Radius (Ra Max)		1.5 mm
Radius Spherical Housing Washer (R)		112 mm
Fatigue Load Limit, Axial (Cua)		15,500 N

FAG 53316