Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 110 mm |
| Width | B | 78 mm |
| Reference speed | nref | 6000 r/min |
| Limiting speed | nG | 2650 r/min |
| Mass | ≈m | 3.56 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Cage | JP — Steel sheet metal | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 150 °C |
Product characteristics3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Cage | JP | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Inner diameter shaft washer | d | 40 mm1.575 in |
| Outer diameter housing washer | D | 110 mm4.331 in |
| Height | T2 | 78 mm3.071 in |
| Basic dynamic load rating, axial | Ca | 138,000 N31,025.18 lbf |
| Basic static load rating, axial | C0a | 255,000 N57,329.137 lbf |
| Fatigue load limit, axial | Cua | 11,700 N2,630.396 lbf |
| Limiting speed | nG | 2,650 1/min |
| Reference speed | nϑr | 6,000 1/min |
| Mass | ≈m | 3.56 kg7.848 lbs |
Mounting dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Maximum diameter shaft shoulder | da max | 50 mm1.969 in |
| Maximum diameter of housing shoulder | Da max | 74 mm2.913 in |
| Maximum filled radius | ra max | 1.5 mm0.059 in |
| Maximum filled radius | ra1 max | 0.6 mm0.024 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Inner diameter housing washer | D1 | 52 mm2.047 in |
| Height shaft washer | B | 18 mm0.709 in |
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Minimum chamfer dimension | r1 min | 0.6 mm0.024 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Minimum load factor | A | 0.4 |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 394992 | |
| Brand | FAG | |
| Base Type | 52410 | |
| X Life Marking | n.r. | |
| SAP material number | 0190070780000 | |
| Base product | 2305100102 | |
| Bearing X designation | 52410 | |
| Mounting Manager ID | 52410 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Axial deep groove ball bearing 524, double direction, steel sheet metal cage | |
| Short Description | Axial deep groove ball bearing |
Technical Data19 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Inner Diameter Shaft Washer (D) | 40 mm | |
| Outside Diameter (D) | 110 mm | |
| Height (T2) | 78 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 138,000 N | |
| Basic Static Load Rating, Axial (C0A) | 255,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 2,650 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Reference Speed (Nϑr) | 6,000 1/min | |
| Height Shaft Washer (B) | 18 mm | |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 50 mm | |
| Minimum Load Factor (A) | 0.4 | |
| Bore Diameter Housing Washer (D1) | 52 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 74 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.6 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | |
| Fatigue Load Limit, Axial (Cua) | 11,700 N |
