Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 29344 | |
| Bore diameter | d | 220 mm |
| Outside diameter | D | 360 mm |
| Width | B | 85 mm |
| Reference speed | nref | 950 r/min |
| Limiting speed | nG | 1820 r/min |
| Mass | ≈m | 29.78 kg |
| Cage | JP — Sheet metal cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Heat treatment | Standard | |
| Locating feature, housing washer | Without | |
| Cage | JP | Sheet metal cage |
| Handling thread holes | Without | |
| Constricted width and inclination variation | Standard | |
| Test certificate | Without |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 220 mm8.661 in |
| Outside diameter | D | 360 mm14.173 in |
| Height | T | 85 mm3.346 in |
| Basic dynamic load rating, axial | Ca | 1,990,000 N447,392.086 lbf |
| Basic static load rating, axial | C0a | 6,200,000 N1,393,884.892 lbf |
| Fatigue load limit, axial | Cua | 730,000 N164,118.705 lbf |
| Limiting speed | nG | 1,820 1/min |
| Reference speed | nϑr | 950 1/min |
| Mass | ≈m | 29.78 kg65.654 lbs |
Mounting dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 285 mm11.22 in |
| Maximum diameter of housing shoulder | Da max | 316 mm12.441 in |
| Minimum bore diameter housing | Db min | 368 mm14.488 in |
| Maximum distance sleeve | db max | 240 mm9.449 in |
| Maximum champfer diameter of distance sleeve | db1 max | 231 mm9.094 in |
| Maximum recess radius | ra max | 3 mm0.118 in |
| Angle of champfer of the distance sleeve | 30 ° |
Dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter housing washer | D1 | 275.5 mm10.846 in |
| Rip diameter shaft washer | d1 | 331.8 mm13.063 in |
| Minimum chamfer dimension | rmin | 4 mm0.157 in |
| Height of the housing washer | T1 | 41 mm1.614 in |
| Height of the shaft washer | T3 | 55 mm2.165 in |
| Distance shaft washer - cage | T5 | 75.8 mm2.984 in |
| Distance of the center point | A | 125 mm4.921 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 396627 | |
| Brand | FAG | |
| Base Type | 29344 | |
| Old Designation | ["29344-E1"] | |
| X Life Marking | XL | |
| SAP material number | 0389999510000 | |
| Base product | 2305110302 | |
| Bearing X designation | 29344-E1-XL | |
| Mounting Manager ID | 29344-E1-XL |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Axial spherical roller bearing 293..-E1-XL, no flanging ring | |
| Short Description | Axial spherical roller bearing |
Technical Data24 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 220 mm | |
| Outside Diameter (D) | 360 mm | |
| Height (T) | 85 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 1,990,000 N | |
| Basic Static Load Rating, Axial (C0A) | 6,200,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 1,820 1/min | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Reference Speed (Nϑr) | 950 1/min | |
| Minimum Diameter Of Housing Shoulder (Db Min) | 368 mm | |
| Bore Diameter Housing Washer (D1) | 275.5 mm | |
| Height Of The Housing Washer (T1) | 41 mm | |
| Rip Diameter Shaft Washer (D1) | 331.8 mm | |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | 30 ° | |
| Height Of The Shaft Washer (T3) | 55 mm | |
| Distance Shaft Washer Cage (T5) | 75.8 mm | |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | 231 mm | |
| Minimum Diameter Shaft Shoulder (Da Min) | 285 mm | |
| Distance Of The Center Point (A) | 125 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 316 mm | |
| Maximum Distance Sleeve (Db Max) | 240 mm | |
| Minimum Chamfer Dimension (Rmin) | 4 mm | |
| Maximum Fillet Radius (Ra Max) | 3 mm | |
| Fatigue Load Limit, Axial (Cua) | 730,000 N |
