Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 234419 | |
| Bore diameter | d | 95 mm |
| Outside diameter | D | 145 mm |
| Width | B | 60 mm |
| Mass | ≈m | 3.036 kg |
| Precision class | SP — Tolerance class SP | |
| Cage | M — Brass Cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 150 °C |
Product characteristics2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Cage | M | Brass Cage |
| Tolerance class | SP | Tolerance class SP |
Main Dimensions & Performance Data10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 95 mm3.74 in |
| Outside diameter | D | 145 mm5.709 in |
| Width | B | 60 mm2.362 in |
| Width, outer ring | C | 30 mm1.181 in |
| Basic dynamic load rating, axial | Ca | 67,000 N15,062.95 lbf |
| Basic static load rating, axial | C0a | 222,000 N49,910.072 lbf |
| Fatigue load limit, axial | Cua | 18,600 N4,181.655 lbf |
| Limiting speed for grease lubrication | nG Grease | 4,000 1/min |
| Limiting speed for oil lubrication | nG Oil | 5,300 1/min |
| Mass | ≈m | 3.036 kg6.693 lbs |
Mounting dimensions8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 115.5 mm4.547 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 135.5 mm5.335 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1.5 mm0.059 in |
| Maximum recess radius | ra1 max | 0.3 mm0.012 in |
| Contact angle | α | 60 ° |
| Distance between the apexes of the pressure cones | a | 241 mm9.488 in |
Dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Rip diameter shaft washer | d1 | 128 mm5.039 in |
| Height wave disc | B1 | 15 mm0.591 in |
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Minimum chamfer dimension | r1 min | 0.3 mm0.012 in |
| Diameter lubrication hole | ds | 4.8 mm0.189 in |
| Width of lubricating groove | ns | 9.5 mm0.374 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 395666 | |
| Brand | FAG | |
| Base Type | 234419 | |
| Old Designation | ["234419M.SP"] | |
| X Life Marking | n.r. | |
| SAP material number | 0190389090000 | |
| Base product | 2305100207 | |
| Bearing X designation | 234419-M-SP | |
| Mounting Manager ID | 234419-M-SP |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Axial angular contact ball bearings 2344, double direction, separable, restricted tolerances | |
| Short Description | Axial angular contact ball bearing |
Additional information3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Axial rigidity | ca | 724 N/µm |
| Lift-off force | KaE | 1,326 N298.112 lbf |
| Preload force | Fv | 465 N104.541 lbf |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 95 mm | |
| Outside Diamater (D) | 145 mm | |
| Total Width (B) | 60 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 67,000 N | |
| Basic Static Load Rating, Axial (C0A) | 222,000 N | |
| Axial Rigidity (Ca) | 724 N/µm | |
| Diameter Lubrication Hole (Ds) | 4.8 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 4,000 1/min | |
| Shoulder Diameter Outer Ring (Da) | 135.5 mm | |
| Limiting Speed (Ng Oil) | 5,300 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Fatigue Load Limit, Axial (Cua) | 18,600 N | |
| Maximum Recess Radius (Ra Max) | 1.5 mm | |
| Preload Force (Fv) | 465 N | |
| Contact Angle (Α) | 60 ° | |
| Width, Outer Ring (C) | 30 mm | |
| Height Wave Disc (B1) | 15 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.3 mm | |
| Width Of Lubricating Groove (Ns) | 9.5 mm | |
| Diameter Shaft Shoulder (Da) | 115.5 mm | |
| Rip Diameter Shaft Washer (D1) | 128 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Distance Between The Apexes Of The Pressure Cones (A) | 241 mm | |
| Lift Off Force (Kae) | 1,326 N |