Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 16040 | |
| Bore diameter | d | 200 mm |
| Outside diameter | D | 310 mm |
| Width | B | 34 mm |
| Basic dynamic load rating | C | 186 kN |
| Basic static load rating | C0 | 202 kN |
| Fatigue load limit | Pu | 7.5 kN |
| Reference speed | nref | 2470 r/min |
| Limiting speed | nG | 3700 r/min |
| Mass | ≈m | 10.1 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | Without — Not sealed | |
| Cage | M — Solid brass cage, rolling element guided | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Design, bearing outer ring | N1 | One retaining groove in the outer ring |
| Cage | M | Solid brass cage, rolling element guided |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S1 | Rings dimensional stabilized up to 200° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 200 mm7.874 in |
| Outside diameter | D | 310 mm12.205 in |
| Width | B | 34 mm1.339 in |
| Basic dynamic load rating, radial | Cr | 186,000 N41,816.547 lbf |
| Basic static load rating, radial | C0r | 202,000 N45,413.669 lbf |
| Fatigue load limit, radial | Cur | 7,500 N1,686.151 lbf |
| Limiting speed | nG | 3,700 1/min |
| Reference speed | nϑr | 2,470 1/min |
| Mass | ≈m | 10.1 kg22.267 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 208.8 mm8.22 in |
| Maximum diameter of housing shoulder | Da max | 301.2 mm11.858 in |
| Maximum fillet radius | ra max | 2 mm0.079 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2 mm0.079 in |
| Shoulder diameter outer ring | D1 | 276.5 mm10.886 in |
| Shoulder diameter inner ring | d1 | 244.35 mm9.62 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor | f0 | 16.4 |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 349254 | |
| Brand | FAG | |
| Base Type | 16040 | |
| Old Designation | ["16040N1M"] | |
| X Life Marking | n.r. | |
| SAP material number | 0190117330000 | |
| Base product | 2305080101 | |
| Bearing X designation | 16040-N1-M | |
| Mounting Manager ID | 16040-N1-M | |
| Grease application ID | 16040-N1-M |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Deep groove ball bearing 160..-N1-M, single row, holding groove, solid brass cage | |
| Short Description | Deep groove ball bearing |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 200 mm | |
| Outside Diameter (D) | 310 mm | |
| Width (B) | 34 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 186,000 N | |
| Basic Static Load Rating, Radial (C0R) | 202,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 3,700 1/min | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Reference Speed (Nϑr) | 2,470 1/min | |
| Calculation Factor (F0) | 16.4 | |
| Fatigue Load Limit, Radial (Cur) | 7,500 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 208.8 mm | |
| Shoulder Diameter Inner Ring (D1) | 244.35 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 301.2 mm | |
| Minimum Chamfer Dimension (Rmin) | 2 mm | |
| Maximum Fillet Radius (Ra Max) | 2 mm | |
| Shoulder Diameter Outer Ring (D1) | 276.5 mm |
