Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“29230” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29230 E150 × 215 × mm | FAG29230-E1-MB150 × 215 × 39 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 29230 E | 29230-E1-MB |
| Product family | Spherical roller thrust bearings | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings |
| Series | — | 29230 |
| Bore diameterd | 150 mm | 150 mm |
| Outside diameterD | 215 mm | 215 mm |
| WidthB | — | 39 mm |
| HeightH | 39 mm | — |
| Basic dynamic load ratingC | 408 kN | — |
| Basic static load ratingC0 | 1600 kN | — |
| Fatigue load limitPu | 180 kN | — |
| Reference speednref | 1800 r/min | 1540 r/min |
| Limiting speednG | 2800 r/min | 3150 r/min |
| Mass≈m | 4.29 kg | 4.485 kg |
| Cage | Sheet metal | MB — Solid brass cage |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Bore diameter housing washerD1 | — | 176 mm |
| Bore diameter housing washerD1 | — | 6.929 in |
| Rip diameter shaft washerd1 | — | 200 mm |
| Rip diameter shaft washerd1 | — | 7.874 in |
| Minimum chamfer dimensionrmin | — | 1.5 mm |
| Minimum chamfer dimensionrmin | — | 0.059 in |
| Height of the housing washerT1 | — | 20.5 mm |
| Height of the housing washerT1 | — | 0.807 in |
| Height of shaft washerT2 | — | 14 mm |
| Height of shaft washerT2 | — | 0.551 in |
| Height of the shaft washerT3 | — | 25 mm |
| Height of the shaft washerT3 | — | 0.984 in |
| Height of shaft washer, inc. lip ringT4 | — | 37 mm |
| Height of shaft washer, inc. lip ringT4 | — | 1.457 in |
| Distance of the center pointA | — | 82 mm |
| Distance of the center pointA | — | 3.228 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 180 mm | — |
| Abutment diameter of spacer ringd b1 | max. 154 mm | — |
| Outside diameter of spacer ringd b2 | max. 154 mm | — |
| Length of spacer ringH a | min. 14 mm | — |
| Diameter of housing abutmentD a | max. 193 mm | — |
| Fillet radiusr a | max. 1.5 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 0.24 | — |
| Engineering — Dimensions | ||
| Outside diameter of shaft washer end side faced 1 | ≈ 200 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 176 mm | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 24 mm | — |
| Height shaft washer + cageB 1 | 34.3 mm | — |
| Height housing washerC | 20.5 mm | — |
| Distance from shaft washer end side face to pressure points | 82 mm | — |
| Chamfer dimension shaft washerr 1,2 | min. 1.5 mm | — |
| Logistics | ||
| Product net weight | 4.29 kg | — |
| eClass code | 23-05-11-03 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Section heightT | — | 39 mm |
| Section heightT | — | 1.535 in |
| Basic dynamic load rating, axialCa | — | 425,000 N |
| Basic dynamic load rating, axialCa | — | 95,548.561 lbf |
| Basic static load rating, axialC0a | — | 1,720,000 N |
| Basic static load rating, axialC0a | — | 386,690.647 lbf |
| Fatigue load limit, axialCua | — | 207,000 N |
| Fatigue load limit, axialCua | — | 46,537.77 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 396455 |
| Base Type | — | 29230 |
| Old Designation | — | ["29230E1MB"] |
| Gpsd Group | — | F02 |
| Product Line Id | — | 37 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0390076690000 |
| Base product | — | 2305110301 |
| Bearing X designation | — | 29230-E1-MB |
| Mounting Manager ID | — | 29230-E1-MB |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 185 mm |
| Minimum diameter shaft shoulderda min | — | 7.283 in |
| Maximum diameter of housing shoulderDa max | — | 193 mm |
| Maximum diameter of housing shoulderDa max | — | 7.598 in |
| Minimum bore diameter housingDb min | — | 219 mm |
| Minimum bore diameter housingDb min | — | 8.622 in |
| Maximum distance sleevedb max | — | 157 mm |
| Maximum distance sleevedb max | — | 6.181 in |
| Maximum recess radiusra max | — | 1.5 mm |
| Maximum recess radiusra max | — | 0.059 in |
| Product characteristics | ||
| Heat treatment | — | Standard |
| Locating feature, housing washer | None | Without |
| Handling thread holes | — | Without |
| Constricted width and inclination variation | — | Standard |
| Test certificate | — | Without |
| Product identity | ||
| Official product category | Spherical roller thrust bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — |
| Structure group ID | BHS_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring |
| Short Description | — | Axial spherical roller bearing |
| Properties | ||
| Bore type | Cylindrical | — |
| Tolerance class | Normal | — |
| Indicative carbon footprint for new product | 15.9 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 150 mm |
| Outside Diameter (D) | — | 215 mm |
| Height (T) | — | 39 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 425,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 1,720,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 3,150 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 1,540 1/min |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 219 mm |
| Bore Diameter Housing Washer (D1) | — | 176 mm |
| Height Of Shaft Washer (T2) | — | 14 mm |
| Height Of The Housing Washer (T1) | — | 20.5 mm |
| Rip Diameter Shaft Washer (D1) | — | 200 mm |
| Height Of The Shaft Washer (T3) | — | 25 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 185 mm |
| Distance Of The Center Point (A) | — | 82 mm |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 37 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 193 mm |
| Maximum Distance Sleeve (Db Max) | — | 157 mm |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm |
| Fatigue Load Limit, Axial (Cua) | — | 207,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.