Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 29230 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF29230 E150 × 215 × mm | FAG29230-E1-MB150 × 215 × 39 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 29230 E | 29230-E1-MB |
| Product family | Spherical roller thrust bearings | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings |
| Series | — | 29230 |
| Bore diameterd | 150 mm | 150 mm |
| Outside diameterD | 215 mm | 215 mm |
| WidthB | — | 39 mm |
| HeightH | 39 mm | — |
| Basic dynamic load ratingC | 408 kN | — |
| Basic static load ratingC0 | 1600 kN | — |
| Fatigue load limitPu | 180 kN | — |
| Reference speednref | 1800 r/min | 1540 r/min |
| Limiting speednG | 2800 r/min | 3150 r/min |
| Mass≈m | 4.29 kg | 4.485 kg |
| Cage | Sheet metal | MB — Solid brass cage |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Bore diameter housing washerD1 | — | 176 mm |
| Bore diameter housing washerD1 | — | 6.929 in |
| Rip diameter shaft washerd1 | — | 200 mm |
| Rip diameter shaft washerd1 | — | 7.874 in |
| Minimum chamfer dimensionrmin | — | 1.5 mm |
| Minimum chamfer dimensionrmin | — | 0.059 in |
| Height of the housing washerT1 | — | 20.5 mm |
| Height of the housing washerT1 | — | 0.807 in |
| Height of shaft washerT2 | — | 14 mm |
| Height of shaft washerT2 | — | 0.551 in |
| Height of the shaft washerT3 | — | 25 mm |
| Height of the shaft washerT3 | — | 0.984 in |
| Height of shaft washer, inc. lip ringT4 | — | 37 mm |
| Height of shaft washer, inc. lip ringT4 | — | 1.457 in |
| Distance of the center pointA | — | 82 mm |
| Distance of the center pointA | — | 3.228 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 180 mm | — |
| Abutment diameter of spacer ringd b1 | max. 154 mm | — |
| Outside diameter of spacer ringd b2 | max. 154 mm | — |
| Length of spacer ringH a | min. 14 mm | — |
| Diameter of housing abutmentD a | max. 193 mm | — |
| Fillet radiusr a | max. 1.5 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 0.24 | — |
| Engineering — Dimensions | ||
| Outside diameter of shaft washer end side faced 1 | ≈ 200 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 176 mm | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 24 mm | — |
| Height shaft washer + cageB 1 | 34.3 mm | — |
| Height housing washerC | 20.5 mm | — |
| Distance from shaft washer end side face to pressure points | 82 mm | — |
| Chamfer dimension shaft washerr 1,2 | min. 1.5 mm | — |
| Logistics | ||
| Product net weight | 4.29 kg | — |
| eClass code | 23-05-11-03 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Section heightT | — | 39 mm |
| Section heightT | — | 1.535 in |
| Basic dynamic load rating, axialCa | — | 425,000 N |
| Basic dynamic load rating, axialCa | — | 95,548.561 lbf |
| Basic static load rating, axialC0a | — | 1,720,000 N |
| Basic static load rating, axialC0a | — | 386,690.647 lbf |
| Fatigue load limit, axialCua | — | 207,000 N |
| Fatigue load limit, axialCua | — | 46,537.77 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 396455 |
| Base Type | — | 29230 |
| Old Designation | — | ["29230E1MB"] |
| Gpsd Group | — | F02 |
| Product Line Id | — | 37 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0390076690000 |
| Base product | — | 2305110301 |
| Bearing X designation | — | 29230-E1-MB |
| Mounting Manager ID | — | 29230-E1-MB |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 185 mm |
| Minimum diameter shaft shoulderda min | — | 7.283 in |
| Maximum diameter of housing shoulderDa max | — | 193 mm |
| Maximum diameter of housing shoulderDa max | — | 7.598 in |
| Minimum bore diameter housingDb min | — | 219 mm |
| Minimum bore diameter housingDb min | — | 8.622 in |
| Maximum distance sleevedb max | — | 157 mm |
| Maximum distance sleevedb max | — | 6.181 in |
| Maximum recess radiusra max | — | 1.5 mm |
| Maximum recess radiusra max | — | 0.059 in |
| Product characteristics | ||
| Heat treatment | — | Standard |
| Locating feature, housing washer | None | Without |
| Handling thread holes | — | Without |
| Constricted width and inclination variation | — | Standard |
| Test certificate | — | Without |
| Product identity | ||
| Official product category | Spherical roller thrust bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — |
| Structure group ID | BHS_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring |
| Short Description | — | Axial spherical roller bearing |
| Properties | ||
| Bore type | Cylindrical | — |
| Tolerance class | Normal | — |
| Indicative carbon footprint for new product | 15.9 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 150 mm |
| Outside Diameter (D) | — | 215 mm |
| Height (T) | — | 39 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 425,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 1,720,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 3,150 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 1,540 1/min |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 219 mm |
| Bore Diameter Housing Washer (D1) | — | 176 mm |
| Height Of Shaft Washer (T2) | — | 14 mm |
| Height Of The Housing Washer (T1) | — | 20.5 mm |
| Rip Diameter Shaft Washer (D1) | — | 200 mm |
| Height Of The Shaft Washer (T3) | — | 25 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 185 mm |
| Distance Of The Center Point (A) | — | 82 mm |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 37 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 193 mm |
| Maximum Distance Sleeve (Db Max) | — | 157 mm |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm |
| Fatigue Load Limit, Axial (Cua) | — | 207,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.