Identify the engine. Keep the conditions.

2.8L 170 CID OHV 12V L6 Chrysler VIN Code: 'A' (1966-1971) 3.2L 198 CID OHV 12V L6 Chrysler VIN Code: 'B' (1970-1974) — bearing reference

Look up source-listed Clevite engine bearing parts, their engine/year conditions, set relationships and available shop dimensions. Preserve the engine version and catalogue notes before comparing a candidate.

Find an engine or exact Clevite part

Selections apply immediately; the button also works without JavaScript. Use a full engine code or part number. Displacement alone can match several different engine families.

2026 manufacturer catalogue, not a universal fitment promise

Source: MAHLE/Clevite EB-20-26 engine-bearing catalogue. Entries retain the catalogue make section, application conditions and printed page. A make heading groups source applications; it is not proof that every engine listed was manufactured by that vehicle brand.

Numbers are Clevite references, not SKF/NTN cross-references. A set, a member shell and a separate thrust washer are different items. Unresolved or conflicting dimensions remain unavailable instead of being guessed.

Source-listed bearing records

8 records

Full source application context

2.8L 170 CID OHV 12V L6 Chrysler VIN Code: 'A' (1966-1971) 3.2L 198 CID OHV 12V L6 Chrysler VIN Code: 'B' (1970-1974) 3.7L 225 CID L6 (1961-1967) 3.7L 225 CID L6 (1963, 1965)

Catalogue section: CHRYSLER · Engine block 22. Match the code, year/VIN limits and each part's additional notes.

Shop dimensions are inches, including rows for metric engines. These are standard-size source dimensions, not permission to use a listed oil clearance in a different engine.

Piston-pin bushing

223-3484

Piston Wrist Pin B Bushing

Application: CHRYSLER · block 22
2.8L 170 CID OHV 12V L6 Chrysler VIN Code: 'A' (1966-1971) 3.2L 198 CID OHV 12V L6 Chrysler VIN Code: 'B' (1970-1974) 3.7L 225 CID L6 (1961-1967) 3.7L 225 CID L6 (1963, 1965)

Catalogue conditions / continuation notes

For Years: 1962-1963, 1965-1967 NOTE: Requires Light Reaming

Numerical dimensions not resolved for this entry. A complete consistent five-column row is not available here. Do not borrow values from a neighbouring part or package.

MAHLE/Clevite EB-20-26 · printed page 169 · reference bd5a77a7. No installation torque or machining approval is implied.

Connecting-rod big end

CB-606A(6)

Connecting Rod AL-5 Bearing Set

Catalogue conditions / continuation notes

For Years: 1961-1967 NOTE: Forged Crankshaft

Standard shaft diameter: 2.1865–2.1875 in
Vertical oil clearance: 0.0007–0.0028 in
Maximum wall at crown: 0.0624 in
Bearing OD or housing bore: 2.3125–2.3130 in
Maximum axial length: 0.9900 in

MAHLE/Clevite EB-20-26 · printed page 169 · reference 5c284682. No installation torque or machining approval is implied.

Connecting-rod big end

CB-606G

Connecting Rod TM-77 Bearing Pair

Catalogue conditions / continuation notes

For Years: 1961-1967 NOTE: Forged Crankshaft, Full Annular Groove

Standard shaft diameter: 2.1865–2.1875 in
Vertical oil clearance: 0.0007–0.0028 in
Maximum wall at crown: 0.0624 in
Bearing OD or housing bore: 2.3125–2.3130 in
Maximum axial length: 0.9900 in

MAHLE/Clevite EB-20-26 · printed page 169 · reference ef54614e. No installation torque or machining approval is implied.

Camshaft

SH-874S

Camshaft Bearing B-1

Source-listed set members: SH403 SH424 SH425 SH874 . Open each member's dimensions and position notes; these are identifiers, not inferred quantities.

Catalogue conditions / continuation notes

Set

Numerical dimensions not resolved for this entry. A complete consistent five-column row is not available here. Do not borrow values from a neighbouring part or package.

MAHLE/Clevite EB-20-26 · printed page 170 · reference 5a07b70a. No installation torque or machining approval is implied.

Camshaft

SH403

Camshaft set member

Member of set: SH-874S. The member identifier is not automatically a complete set.

Catalogue conditions / continuation notes

Set

Numerical dimensions not resolved for this entry. A complete consistent five-column row is not available here. Do not borrow values from a neighbouring part or package.

MAHLE/Clevite EB-20-26 · printed page 170 · reference c2189fe0. No installation torque or machining approval is implied.

Camshaft

SH424

Camshaft set member

Member of set: SH-874S. The member identifier is not automatically a complete set.

Catalogue conditions / continuation notes

Set

Standard shaft diameter: 1.9670–1.9680 in
Vertical oil clearance: 0.0005–0.0045 in
Maximum wall at crown: 0.0645 in
Bearing OD or housing bore: 2.0985–2.0995 in
Maximum axial length: 0.7600 in

MAHLE/Clevite EB-20-26 · printed page 170 · reference 8a1ff9b9. No installation torque or machining approval is implied.

Camshaft

SH425

Camshaft set member

Member of set: SH-874S. The member identifier is not automatically a complete set.

Catalogue conditions / continuation notes

Set

Numerical dimensions not resolved for this entry. A complete consistent five-column row is not available here. Do not borrow values from a neighbouring part or package.

MAHLE/Clevite EB-20-26 · printed page 170 · reference 98b39efd. No installation torque or machining approval is implied.

Camshaft

SH874

Camshaft set member

Member of set: SH-874S. The member identifier is not automatically a complete set.

Catalogue conditions / continuation notes

For Years: 1961-1967

Set

Standard shaft diameter: 1.9980–1.9990 in
Vertical oil clearance: 0.0025–0.0065 in
Maximum wall at crown: 0.0640 in
Bearing OD or housing bore: 2.1295–2.1305 in
Maximum axial length: 0.9300 in

MAHLE/Clevite EB-20-26 · printed page 170 · reference 6a4c1eb1. No installation torque or machining approval is implied.

Use the reference correctly

Identify before comparing

Keep engine code, production year, VIN qualifiers, bearing position and the existing shell markings. A 350, 1.8 or 4.6 label is not a unique engine identification.

Measure the actual assembly

Standard journal dimensions do not describe a worn or reground shaft. Verify the installed housing, required repair size and oil clearance with the engine-specific procedure.

Keep unresolved values unresolved

Empty dimensional fields can reflect set-only entries, incomplete source rows or conflicts. They do not mean zero clearance, and another entry's values are not a substitute.

Read the oil-clearance, material and installation reference →Check replacement evidence →Separate wheel, hub and seal vehicle reference →

Reference basis and limitations

This independent lookup reorganises factual entries from the 2026 MAHLE/Clevite engine-bearing catalogue. The original source fingerprint, extraction record and application block are retained privately. The catalogue source is not a guarantee of current stock, current vehicle approval or complete coverage of every engine. BearingScope does not sell these parts or provide a rebuild service.

2.8L 170 CID OHV 12V L6 Chrysler VIN Code: 'A' (1966-1971) 3.2L 198 CID OHV 12V L6 Chrysler VIN Code: 'B' (1970-1974) — bearing reference

Find an engine or exact Clevite part

2026 manufacturer catalogue, not a universal fitment promise

Source-listed bearing records

Full source application context

Use the reference correctly

Identify before comparing

Measure the actual assembly

Keep unresolved values unresolved

Reference basis and limitations

Find, filter and compare bearing model data in one place.