NU 206 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with NU 206. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
NU 206 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 13 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKFNU 206 ECJSingle row cylindrical roller bearing, NU design |
| 44 kN | 36.5 kN | 13000 rpm | 14000 rpm | 0.204 kg204 g |
| SKFNU 206 ECJ/C3Single row cylindrical roller bearing, NU design |
| 44 kN | 36.5 kN | 13000 rpm | 14000 rpm | 0.204 kg204 g |
| SKFNU 206 ECKP/C3Single row cylindrical roller bearing, NU design, with tapered bore |
| 44 kN | 36.5 kN | 13000 rpm | 14000 rpm | 0.2 kg200 g |
| SKFNU 206 ECMLSingle row cylindrical roller bearing, NU design |
| 44 kN | 36.5 kN | 13000 rpm | 22000 rpm | 0.237 kg237 g |
| SKFNU 206 ECPSingle row cylindrical roller bearing, NU design |
| 44 kN | 36.5 kN | 13000 rpm | 14000 rpm | 0.2 kg200 g |
| SKFNU 206 ECP/C3Single row cylindrical roller bearing, NU design |
| 44 kN | 36.5 kN | 13000 rpm | 14000 rpm | 0.202 kg202 g |
| SKFNU 206 ECPHSingle row cylindrical roller bearing, NU design |
| 44 kN | 36.5 kN | 13000 rpm | 14000 rpm | 0.2 kg200 g |
| FAGNU206-E-XL-M1Cylindrical roller bearing |
| 46 kN | 37.5 kN | 9600 rpm | 21200 rpm | 0.228 kg228 g |
| FAGNU206-E-XL-TVP2Cylindrical roller bearing |
| 46 kN | 37.5 kN | 9600 rpm | 16300 rpm | 0.2 kg200 g |
| FAGNU206-E-XL-TVP2-C2Cylindrical roller bearing |
| 46 kN | 37.5 kN | 9600 rpm | 16300 rpm | 0.2 kg200 g |
| FAGNU206-E-XL-TVP2-C3Cylindrical roller bearing |
| 46 kN | 37.5 kN | 9600 rpm | 16300 rpm | 0.2 kg200 g |
| NSKNU206EWCylindrical roller bearing |
| 48 kN | 37.5 kN | — | — | — |
| KOYONU206RCylindrical roller bearing |
| 48.9 kN | 37.4 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.209 kg209 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF NU 206 ECJ | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF NU 206 ECJ/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF NU 206 ECKP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 206 ECML | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 206 ECP | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| SKF NU 206 ECP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 206 ECPH | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| FAG NU206-E-XL-M1 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M1 — Two Piece Brass Cage Roller Guided | Not recorded | Not recorded |
| FAG NU206-E-XL-TVP2 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| FAG NU206-E-XL-TVP2-C2 | Not recorded | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| FAG NU206-E-XL-TVP2-C3 | Not recorded | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| NSK NU206EW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO NU206R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NU20/600EMAW73W220C3
Cylindrical roller bearing
View full technical record →SKFNU 2060 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →FAGNU2060-E-M1
Cylindrical roller bearing
View full technical record →FAGNU2060-E-M1A
Cylindrical roller bearing
View full technical record →FAGNU2060-E-M1A-C3
Cylindrical roller bearing
View full technical record →FAGNU2060-E-M1A-C4
Cylindrical roller bearing
View full technical record →SKFNU 20/630 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 20/670 ECMA/HB1
Single row cylindrical roller bearing, NU design
View full technical record →FAGNU2068-E-M1
Cylindrical roller bearing
View full technical record →SKFNU 206 ECJ
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 206 ECJ/C3
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 206 ECKP/C3
Single row cylindrical roller bearing, NU design, with tapered bore
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.