99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7016 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7016. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7016 dimensions and recorded technical data

The recorded 7016 base designation measures 80×125×22 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 99 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
NTN7016Angular contact ball bearing
Internal diameter (d)
80 mm
3.149606 in
External diameter (D)
125 mm
4.92126 in
Bearing/Inner ring width (B)
22 mm
0.866142 in
59 kN50.5 kN——0.994 kg994 g
SKF7016 ACBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
25.1 kN21.6 kN——0.84 kg840 g
SKF7016 ACBGA/P4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
25.1 kN21.6 kN——0.897 kg897 g
SKF7016 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.703 kg703 g
SKF7016 ACDGA/HCP4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.703 kg703 g
SKF7016 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.842 kg842 g
SKF7016 ACDGA/P4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.842 kg842 g
SKF7016 ACDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.842 kg842 g
SKF7016 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.703 kg703 g
SKF7016 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.842 kg842 g
SKF7016 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.842 kg842 g
SKF7016 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.41 kg1410 g
SKF7016 ACD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
165 kN232 kN——2.81 kg2810 g
SKF7016 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
62.4 kN58.5 kN——0.842 kg842 g
SKF7016 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ADBDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4ALDGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
101 kN116 kN——1.68 kg1680 g
SKF7016 ACD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
165 kN232 kN——3.37 kg3370 g
SKF7016 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
165 kN232 kN——3.37 kg3370 g
SKF7016 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
165 kN232 kN——3.37 kg3370 g
SKF7016 ACD/P4AQBTCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
165 kN232 kN——3.37 kg3370 g
SKF7016 ACD/P4AQGAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
165 kN232 kN——3.37 kg3370 g
SKF7016 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
135 kN176 kN——2.53 kg2530 g
SKF7016 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
135 kN176 kN——2.53 kg2530 g
SKF7016 ACD/P4ATFTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
135 kN176 kN——2.53 kg2530 g
SKF7016 ACD/P4ATGBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
135 kN176 kN——2.53 kg2530 g
SKF7016 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
32.5 kN26.5 kN——0.777 kg777 g
SKF7016 ACEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
32.5 kN26.5 kN——0.777 kg777 g
SKF7016 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
32.5 kN26.5 kN——0.855 kg855 g
SKF7016 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
52.7 kN53 kN——1.56 kg1560 g
SKF7016 ACE/HCP4AH1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
52.7 kN53 kN——1.56 kg1560 g
SKF7016 ACE/HCP4AH1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
52.7 kN53 kN——1.56 kg1560 g
SKF7016 ACE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Recorded bore (d)
80 mm
3.149606 in
Recorded outside dimension (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
44 mm
1.732283 in
52.7 kN53 kN——1.61 kg1610 g
SKF7016 ACE/HCP4ALDTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
52.7 kN53 kN——1.56 kg1560 g
SKF7016 ACE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
32.5 kN26.5 kN——0.855 kg855 g
SKF7016 ACE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
52.7 kN53 kN——1.71 kg1710 g
SKF7016 CBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Recorded bore (d)
80 mm
3.149606 in
Recorded outside dimension (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
22 mm
0.866142 in
26.5 kN22.8 kN——0.841 kg841 g
SKF7016 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.703 kg703 g
SKF7016 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.842 kg842 g
SKF7016 CDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.842 kg842 g
SKF7016 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.842 kg842 g
SKF7016 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.842 kg842 g
SKF7016 CDGD/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.842 kg842 g
SKF7016 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.703 kg703 g
SKF7016 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.41 kg1410 g
SKF7016 CD/HCP4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.41 kg1410 g
SKF7016 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.41 kg1410 g
SKF7016 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
65 kN61 kN——0.842 kg842 g
SKF7016 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADFCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
106 kN122 kN——1.68 kg1680 g
SKF7016 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
174 kN245 kN——3.37 kg3370 g
SKF7016 CD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
174 kN245 kN——3.37 kg3370 g
SKF7016 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
140 kN183 kN——2.53 kg2530 g
SKF7016 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
140 kN183 kN——2.53 kg2530 g
SKF7016 CD/P4ATGAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
140 kN183 kN——2.53 kg2530 g
SKF7016 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
33.8 kN28 kN——0.777 kg777 g
SKF7016 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
33.8 kN28 kN——0.855 kg855 g
SKF7016 CE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
33.8 kN28 kN——0.777 kg777 g
SKF7016 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN56 kN——1.56 kg1560 g
SKF7016 CE/HCP4ALDBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN56 kN——1.56 kg1560 g
SKF7016 CE/HCP4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
90.4 kN112 kN——3.11 kg3110 g
SKF7016 CE/HCP4ATBTAMatched set of three super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
66 mm
2.598425 in
74.1 kN85 kN——2.33 kg2330 g
SKF7016 CE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
33.8 kN28 kN——0.855 kg855 g
SKF7016 CE/P4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN56 kN——1.71 kg1710 g
SKF7016 CE/P4ADBBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN56 kN——1.71 kg1710 g
SKF7016 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN56 kN——1.71 kg1710 g
SKF7016 FEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
33.8 kN27.5 kN——0.777 kg777 g
SKF7016 FEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
33.8 kN27.5 kN——0.777 kg777 g
SKF7016 FE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN55 kN——1.56 kg1560 g
SKF7016 FE/HCP4ALDTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
55.3 kN55 kN——1.56 kg1560 g
SKF7016 FE/HCP4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
88 mm
3.464567 in
88.4 kN110 kN——3.11 kg3110 g
NSK7016AWAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Individual bearing width (B)
22 mm
0.866142 in
60.5 kN53 kN——0.88 kg880 g
NSK7016AWDBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
44 mm
1.732283 in
98.5 kN106 kN———
NSK7016AWDFAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
44 mm
1.732283 in
98.5 kN106 kN———
NSK7016AWDTAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
44 mm
1.732283 in
98.5 kN106 kN———
KOYO7016BDB FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
97.1 kN91.3 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4600 min-11.86 kg1860 g
KOYO7016BDF FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
97.1 kN91.3 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4600 min-11.86 kg1860 g
KOYO7016BDT FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
97.1 kN91.3 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4600 min-11.86 kg1860 g
KOYO7016B FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
59.8 kN45.7 kN—4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5800 min-10.93 kg930 g
KOYO7016CDB FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
119 kN111 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-11.86 kg1860 g
KOYO7016CDF FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
119 kN111 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-11.86 kg1860 g
KOYO7016CDT FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
119 kN111 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-11.86 kg1860 g
KOYO7016C FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
73.3 kN55.3 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-10.93 kg930 g
KOYO7016DB FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
108 kN101 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5800 min-11.86 kg1860 g
KOYO7016DF FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
108 kN101 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5800 min-11.86 kg1860 g
KOYO7016DT FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
44 mm
1.732283 in
108 kN101 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5800 min-11.86 kg1860 g
KOYO7016 FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
22 mm
0.866142 in
66.7 kN50.6 kN—5800 rpmLimiting Speeds(Grease Lub.): 5800 min-1Limiting Speeds(Oil Lub.): 7200 min-10.93 kg930 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
NTN 7016Not recordedNot recordedCNpolyamide cage.Not recordedNot recorded
SKF 7016 ACBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACBGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACDGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACDGA/P4ALWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACDGATP/P4BWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACD/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADBDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ALDGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4AQBCCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4AQBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4AQGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ATFTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACD/P4ATGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACEGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACE/HCP4AH1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACE/HCP4AH1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACE/HCP4ALDTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 ACE/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 ACE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CDGATP/P4BWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CDGD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CD/HCP4ADBBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADFCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADGDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CD/P4ATGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CE/HCP4ALDBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CE/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CE/HCP4ATBTAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 CE/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CE/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CE/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 CE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7016 FEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 FEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 FE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 FE/HCP4ALDTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7016 FE/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
NSK 7016AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7016AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7016AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7016AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7016BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7016 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

NTN

7016

Angular contact ball bearing

View full technical record →SKF

7016 ACBGA/HCP4A

Super-precision, high-speed B design, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACBGA/P4A

Super-precision, high-speed B design, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACDGA/HCP4AL

Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7016 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACDGA/P4AL

Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7016 ACDGATP/P4B

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7016 ACD/HCP4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 99 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search