99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7005 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7005. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7005 dimensions and recorded technical data

The recorded 7005 base designation measures 25×47×12 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 91 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
NTN7005Angular contact ball bearing
Internal diameter (d)
25 mm
0.984252 in
External diameter (D)
47 mm
1.850394 in
Bearing/Inner ring width (B)
12 mm
0.472441 in
11.9 kN6.85 kN——0.093 kg93 g
SKF7005 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.069 kg69 g
SKF7005 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.077 kg77 g
SKF7005 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.077 kg77 g
SKF7005 ACDGC/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.069 kg69 g
SKF7005 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.077 kg77 g
SKF7005 ACDGD/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.077 kg77 g
SKF7005 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.069 kg69 g
SKF7005 ACD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.137 kg137 g
SKF7005 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.077 kg77 g
SKF7005 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
14.8 kN10 kN——0.154 kg154 g
SKF7005 ACD/P4AQBTCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
48 mm
1.889764 in
24.2 kN20 kN——0.309 kg309 g
SKF7005 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
36 mm
1.417323 in
19.9 kN15 kN——0.232 kg232 g
SKF7005 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
36 mm
1.417323 in
19.9 kN15 kN——0.232 kg232 g
SKF7005 ACD/P4ATGBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
36 mm
1.417323 in
19.9 kN15 kN——0.233 kg233 g
SKF7005 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
7.93 kN3.9 kN——0.066 kg66 g
SKF7005 ACEGA/HCP4AL1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
7.93 kN3.9 kN——0.068 kg68 g
SKF7005 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
7.93 kN3.9 kN——0.075 kg75 g
SKF7005 ACEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
7.93 kN3.9 kN——0.075 kg75 g
SKF7005 ACE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
7.93 kN3.9 kN——0.066 kg66 g
SKF7005 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
12.7 kN7.8 kN——0.131 kg131 g
SKF7005 ACE/HCP4AL1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
12.7 kN7.8 kN——0.131 kg131 g
SKF7005 ACE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
7.93 kN3.9 kN——0.075 kg75 g
SKF7005 ACE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
12.7 kN7.8 kN——0.149 kg149 g
SKF7005 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.069 kg69 g
SKF7005 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.077 kg77 g
SKF7005 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.077 kg77 g
SKF7005 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.077 kg77 g
SKF7005 CDGD/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
47 mm
1.850394 in
Catalogue width (symbol unverified)
12 mm
0.472441 in
9.56 kN5.2 kN——0.077 kg77 g
SKF7005 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.069 kg69 g
SKF7005 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.137 kg137 g
SKF7005 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.137 kg137 g
SKF7005 CD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.137 kg137 g
SKF7005 CD/HCP4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.137 kg137 g
SKF7005 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.077 kg77 g
SKF7005 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
15.6 kN10.4 kN——0.154 kg154 g
SKF7005 CD/P4AHSuper-precision, high-capacity, single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.56 kN5.2 kN——0.077 kg77 g
SKF7005 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
36 mm
1.417323 in
20.8 kN15.6 kN——0.232 kg232 g
SKF7005 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.32 kN4.15 kN——0.068 kg68 g
SKF7005 CEGA/HCVQ126Super-precision, high-speed E design, universally matchable single row angular contact ball bearing
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
47 mm
1.850394 in
Catalogue width (symbol unverified)
12 mm
0.472441 in
8.32 kN4.15 kN——0.068 kg68 g
SKF7005 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.32 kN4.15 kN——0.075 kg75 g
SKF7005 CEGB/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.32 kN4.15 kN——0.066 kg66 g
SKF7005 CEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.32 kN4.15 kN——0.075 kg75 g
SKF7005 CE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.32 kN4.15 kN——0.068 kg68 g
SKF7005 CE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.132 kg132 g
SKF7005 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.132 kg132 g
SKF7005 CE/HCP4ADGBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.131 kg131 g
SKF7005 CE/HCP4ADGCMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.137 kg137 g
SKF7005 CE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.131 kg131 g
SKF7005 CE/HCP4AL1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.132 kg132 g
SKF7005 CE/HCP4ALDBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.137 kg137 g
SKF7005 CE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.32 kN4.15 kN——0.074 kg74 g
SKF7005 CE/P4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.149 kg149 g
SKF7005 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.149 kg149 g
SKF7005 CE/P4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.5 kN8.3 kN——0.149 kg149 g
SKF7005 FEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
8.19 kN4.05 kN——0.068 kg68 g
SKF7005 FE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.3 kN8.15 kN——0.132 kg132 g
SKF7005 FE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
13.3 kN8.15 kN——0.132 kg132 g
SKF7005/VA9D1Super-precision universally matchable single row angular contact ball bearing for driven tools
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
9.23 kN5 kN——0.078 kg78 g
FAG7005-B-XL-2RSD-TVPAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
16 kN9.9 kN12000 rpm13600 rpm0.075 kg75 g
FAG7005-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
16 kN9.9 kN—8100 rpm0.075 kg75 g
FAG7005-B-XL-2RS-TVP-ULAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
16 kN9.9 kN—8200 rpm0.078 kg78 g
FAG7005-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
16 kN9.9 kN12000 rpm19900 rpm0.072 kg72 g
NSK7005AWAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Individual bearing width (B)
12 mm
0.472441 in
12.4 kN7.4 kN——0.079 kg79 g
NSK7005AWDBAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
20.2 kN14.8 kN———
NSK7005AWDFAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
20.2 kN14.8 kN———
NSK7005AWDTAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
20.2 kN14.8 kN———
KOYO7005BDB FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
20.7 kN13.4 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 13000 min-10.182 kg182 g
KOYO7005BDF FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
20.7 kN13.4 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 13000 min-10.182 kg182 g
KOYO7005BDT FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
20.7 kN13.4 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 13000 min-10.182 kg182 g
KOYO7005B FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
12.8 kN6.7 kN—12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.091 kg91 g
KOYO7005CDB FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
24.9 kN16 kN—18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 24000 min-10.182 kg182 g
KOYO7005CDF FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
24.9 kN16 kN—18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 24000 min-10.182 kg182 g
KOYO7005CDT FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
24.9 kN16 kN—18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 24000 min-10.182 kg182 g
KOYO7005C FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
15.4 kN8 kN—23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 30000 min-10.091 kg91 g
KOYO7005DB FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
22.9 kN14.8 kN—13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.182 kg182 g
KOYO7005DF FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
22.9 kN14.8 kN—13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.182 kg182 g
KOYO7005DT FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
24 mm
0.944882 in
22.9 kN14.8 kN—13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.182 kg182 g
KOYO7005 FYAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
47 mm
1.850394 in
Width (B)
12 mm
0.472441 in
14.1 kN7.4 kN—17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 21000 min-10.091 kg91 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
NTN 7005Not recordedNot recordedCNpolyamide cage.Not recordedNot recorded
SKF 7005 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACDGC/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACDGD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4AQBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACD/P4ATGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACEGA/HCP4AL1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACEGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACE/HCP4AL1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 ACE/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 ACE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CDGD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CD/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4AHWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CEGA/HCVQ126WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CEGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CEGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4ADGCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4AL1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/HCP4ALDBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 CE/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CE/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 CE/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7005 FEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 FE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005 FE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7005/VA9D1WithoutNot recordedNot recordedNot recordedBearing steelNot recorded
FAG 7005-B-XL-2RSD-TVP2RSD — Non-contact seal on both sidesPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7005-B-XL-2RS-TVP2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7005-B-XL-2RS-TVP-UL2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7005-B-XL-TVPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
NSK 7005AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7005AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7005AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7005AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7005BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7005 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

NTN

7005

Angular contact ball bearing

View full technical record →SKF

7005 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7005 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7005 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7005 ACDGC/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7005 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7005 ACDGD/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7005 ACD/HCP4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7005 ACD/HCP4ADGB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7005 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7005 ACD/P4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7005 ACD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 91 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search