Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications15 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 7005 | |
| Bore diameter | d | 25 mm |
| Outside diameter | D | 47 mm |
| Width | B | 12 mm |
| Basic dynamic load rating | C | 16 kN |
| Basic static load rating | C0 | 9.9 kN |
| Fatigue load limit | Pu | 0.69 kN |
| Limiting speed | nG | 8200 r/min |
| Mass | ≈m | 0.078 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Sealing | 2RS — Contact seal on both sides | |
| Cage | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | |
| Lubricant | GA14 — Ball bearing grease, low noise | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | |
| Type of Seal | 2RS | Contact seal on both sides |
| Cage | TVP | Solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Bearing with matched conditions for fitting in pairs | UL | Bearing set with light preload |
| Lubricant | GA14 | Ball bearing grease, low noise |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 25 mm0.984 in |
| Outside diameter | D | 47 mm1.85 in |
| Width | B | 12 mm0.472 in |
| Basic dynamic load rating, radial | Cr | 16,000 N3,597.122 lbf |
| Basic static load rating, radial | C0r | 9,900 N2,225.719 lbf |
| Fatigue load limit, radial | Cur | 690 N155.126 lbf |
| Limiting speed | nG | 8,200 1/min |
| Mass | ≈m | 0.078 kg0.172 lbs |
Mounting dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter of shaft shoulder | da min | 28.2 mm1.11 in |
| Maximum diameter of housing shoulder | Da max | 43.8 mm1.724 in |
| Maximum diameter of housing shoulder | Db max | 45 mm1.772 in |
| Maximum fillet radius of shaft | ra max | 0.6 mm0.024 in |
| Maximum fillet radius of housing | ra1 max | 0.3 mm0.012 in |
Dimensions9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 0.6 mm0.024 in |
| Minimum chamfer dimension | r1 min | 0.3 mm0.012 in |
| Shoulder diameter on outer ring wide side face | D1 | 39.83 mm1.568 in |
| Caliber diameter on outer ring wide side face | D2 | 40.5 mm1.594 in |
| Caliber diameter on outer ring small side face | D3 | 44.81 mm1.764 in |
| Shoulder diameter on inner ring wide side face | d1 | 33.94 mm1.336 in |
| Caliber diameter on inner ring wide side face | d2 | 31.52 mm1.241 in |
| Distance between the apexes of the pressure cones | a | 21.5 mm0.846 in |
| Contact angle | α | 40 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1686288 | |
| Brand | FAG | |
| Base Type | 7005 | |
| X Life Marking | XL | |
| SAP material number | 0952935580000 | |
| Base product | 2305080301 | |
| Bearing X designation | 7005-B-XL-2RS-TVP-UL | |
| Mounting Manager ID | 7005-B-XL-2RS-TVP-UL |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 70..-B-XL-2RS-TVP, single row, X-life, seals, plastic cage | |
| Short Description | Angular contact ball bearing |
Additional information3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload per set max. | Vmax | -4 µm-0.00016 in |
| Tolerance for axial clearance or preload per set | Tol(+) | 8 µm0.00031 in |
| Preload force | FV max | 115 N25.854 lbf |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 25 mm | |
| Outside Diameter (D) | 47 mm | |
| Width (B) | 12 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 16,000 N | |
| Basic Static Load Rating, Radial (C0R) | 9,900 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 8,200 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Caliber Diameter On Outer Ring Small Side Face (D3) | 44.81 mm | |
| Caliber Diameter Outer Ring (D2) | 40.5 mm | |
| Preload Force (Fv Max) | 115 N | |
| Preload Per Set Max. (Vmax) | -4 µm | |
| Maximum Diameter Of Housing Shoulder (Db Max) | 45 mm | |
| Tolerance For Axial Clearance Or Preload Per Set (Tol(+)) | 8 µm | |
| Fatigue Load Limit, Radial (Cur) | 690 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 28.2 mm | |
| Shoulder Diameter Inner Ring (D1) | 33.94 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 43.8 mm | |
| Minimum Chamfer Dimension (Rmin) | 0.6 mm | |
| Caliber Diameter Inner Ring (D1) | 31.52 mm | |
| Maximum Fillet Radius (Ra Max) | 0.6 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Shoulder Diameter Outer Ring (D1) | 39.83 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.3 mm | |
| Contact Angle (Α) | 40 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 21.5 mm |
