99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

6322 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6322. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

6322 dimensions and recorded technical data

This base designation has conflicting recorded dimensions. Choose the complete brand and designation below. A single dimensional answer would hide a real difference between records.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 53 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6322

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6322/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore diameterNot supplied separately110.0 mm
Outside diameterNot supplied separately240.0 mm
WidthNot supplied separately50.0 mm
Open the complete SKF 6322/C3 record →
SKF 6322 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore diameterd110 mm
Deviation limits of mid-range bore diametert Δdmp-0.02 to 0 mm
Outside diameterD240 mm
Deviation limits of mid-range outside diametert ΔDmp-0.03 to 0 mm
WidthB50 mm
Deviation limits of ring widtht ΔBs-0.2 to 0 mm
Shoulder diameterd 1≈ 149.5 mm
Shoulder diameterD 1≈ 199.95 mm
Chamfer dimensionr 1,2min. 3 mm

Mounting limits and abutments

MeasurementSource symbolRecorded value
Diameter of shaft abutmentd amin. 124 mm
Diameter of housing abutmentD amax. 226 mm
Radius of shaft or housing filletr amax. 2.5 mm
Open the complete SKF 6322 record →
FAG 6322 — 9 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore diameterd110 mm
Outside diameterD240 mm
WidthB50 mm
Minimum chamfer dimensionrmin3 mm
Shoulder diameter outer ringD1197.54 mm
Shoulder diameter inner ringd1153.26 mm

Mounting limits and abutments

MeasurementSource symbolRecorded value
Minimum diameter shaft shoulderda min124 mm
Maximum diameter of housing shoulderDa max226 mm
Maximum fillet radiusra max2.5 mm
Open the complete FAG 6322 record →
FAG 6322-C3 — 9 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore diameterd110 mm
Outside diameterD240 mm
WidthB50 mm
Minimum chamfer dimensionrmin3 mm
Shoulder diameter outer ringD1197.54 mm
Shoulder diameter inner ringd1153.26 mm

Mounting limits and abutments

MeasurementSource symbolRecorded value
Minimum diameter shaft shoulderda min124 mm
Maximum diameter of housing shoulderDa max226 mm
Maximum fillet radiusra max2.5 mm
Open the complete FAG 6322-C3 record →
KOYO 6322 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore diameterd110 mm
Outside diameterD240 mm
WidthB50 mm
Open the complete KOYO 6322 record →
TIMKEN 6322 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore (d)d110 mm
O.D. (D)D240 mm / 9.449 in
Width (B)B50 mm / 1.969 in

Mounting limits and abutments

MeasurementSource symbolRecorded value
Max Shaft Fillet RadiusNot supplied separately3 mm / 0.118 in
Open the complete TIMKEN 6322 record →
TIMKEN 6322-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

MeasurementSource symbolRecorded value
Bore (d)d110 mm
O.D. (D)D240 mm / 9.449 in
Width (B)B50 mm / 1.969 in

Mounting limits and abutments

MeasurementSource symbolRecorded value
Max Shaft Fillet RadiusNot supplied separately3 mm / 0.118 in
Open the complete TIMKEN 6322-C3 record →
Check shaft and hole fit →Search measured dimensions →
Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF63/22Deep groove ball bearing
Bore diameter (d)
22 mm
0.866142 in
Outside diameter (D)
56 mm
2.204724 in
Width (B)
16 mm
0.629921 in
18.6 kN9.3 kN28000 rpm18000 rpm0.18 kg180 g
SKF6322Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
203 kN180 kN6000 rpm3800 rpm9.48 kg9480 g
FAG6322Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.3 kg10300 g
TIMKEN6322Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.54 kg9540 g
NSK6322Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Bearing width (B)
50 mm
1.968504 in
226 kN179 kN——9.51 kg9510 g
KOYO63/22Deep groove ball bearing
Bore diameter (d)
22 mm
0.866142 in
Outside diameter (D)
56 mm
2.204724 in
Width (B)
16 mm
0.629921 in
23.1 kN9.4 kN—13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.201 kg201 g
KOYO6322Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
257 kN180 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3200 min-19.54 kg9540 g
NACHI63/22Deep groove ball bearing
Bore diameter (d)
22 mm
0.866142 in
Outside diameter (D)
56 mm
2.204724 in
Bearing width (B)
16 mm
0.629921 in
23.2 kN9.25 kN——0.176 kg176 g
SKF6322/C3Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
203 kN180 kN6000 rpm3800 rpm9.48 kg9480 g
SKF6322/C3VL0241INSOCOAT® deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
216 kN180 kN6000 rpm3800 rpm9.32 kg9320 g
SKF6322/C4Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
203 kN180 kN6000 rpm3800 rpm9.48 kg9480 g
SKF6322/HC5C3Hybrid ceramic deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
203 kN180 kN7000 rpm4500 rpm8.12 kg8120 g
SKF6322/HC5C3S0VA970Hybrid ceramic deep groove ball bearing for wind turbine generators
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
156 kN132 kN6700 rpm4300 rpm9.34 kg9340 g
SKF6322/HC5C3VA505SKF CeraDrive, hybrid ceramic deep groove ball bearing optimized for industrial electric motor
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
186 kN132 kN6700 rpm4300 rpm9.29 kg9290 g
SKF6322 MDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
203 kN180 kN6000 rpm5300 rpm11 kg11000 g
SKF6322 M/C3Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
203 kN180 kN6000 rpm5300 rpm11.4 kg11400 g
SKF6322 M/C3VL0241INSOCOAT® deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
216 kN180 kN6000 rpm5300 rpm10.9 kg10900 g
SKF6322 M/C4VL0241INSOCOAT® deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
216 kN180 kN6000 rpm5300 rpm10.9 kg10900 g
FAG6322-2RSRDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN—1750 rpm10.35 kg10350 g
FAG6322-2RSR-L100-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN—1750 rpm10.36 kg10360 g
FAG6322-2ZDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3250 rpm9.981 kg9981 g
FAG6322-2Z-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3250 rpm9.981 kg9981 g
FAG6322-2Z-C4Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3250 rpm10.4 kg10400 g
FAG6322-2Z-L038-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3250 rpm10.2 kg10200 g
FAG6322-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.183 kg10183 g
FAG6322-C4Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.3 kg10300 g
FAG6322-J20AADeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.3 kg10300 g
FAG6322-J20AA-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.079 kg10079 g
FAG6322-J20ABDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.067 kg10067 g
FAG6322-J20AB-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.067 kg10067 g
FAG6322-J20GA-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.3 kg10300 g
FAG6322-MDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.557 kg11557 g
FAG6322-M-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.75 kg11750 g
FAG6322-M-C4Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.75 kg11750 g
FAG6322-M-J20AADeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.7 kg11700 g
FAG6322-M-J20AA-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.23 kg11230 g
FAG6322-M-J20AA-C4Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.23 kg11230 g
FAG6322-M-J20GA-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.5 kg11500 g
FAG6322-M-J20GA-C4Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm4950 rpm11.5 kg11500 g
FAG6322-ZDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.4 kg10400 g
FAG6322-Z-C3Deep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
201 kN165 kN4150 rpm3800 rpm10.1 kg10100 g
TIMKEN6322-2RSDeep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.48 kg9480 g
TIMKEN6322-C3Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.54 kg9540 g
TIMKEN6322MDeep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——11.82 kg11820 g
TIMKEN6322M-C3Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——11.82 kg11820 g
TIMKEN6322-RS-C3Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.48 kg9480 g
TIMKEN6322-ZDeep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.48 kg9480 g
TIMKEN6322-ZZDeep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.48 kg9480 g
TIMKEN6322-ZZ-C3Deep groove ball bearing
Recorded bore (d)
110 mm
4.330709 in
Recorded outside dimension (D)
240 mm
9.448819 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
205 kN179 kN——9.54 kg9540 g
NSK6322ZZDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Bearing width (B)
50 mm
1.968504 in
226 kN179 kN———
KOYO6322 2RSDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
257 kN180 kN—1900 rpmLimiting Speeds(Grease Lub.): 1900 min-19.54 kg9540 g
KOYO6322 2RUDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
257 kN180 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-19.54 kg9540 g
KOYO6322 ZZXDeep groove ball bearing
Bore diameter (d)
110 mm
4.330709 in
Outside diameter (D)
240 mm
9.448819 in
Width (B)
50 mm
1.968504 in
257 kN180 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-19.54 kg9540 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 63/22WithoutNormalCNSheet metalBearing steelNone
SKF 6322WithoutNormalCNSheet metalBearing steelNone
FAG 6322Without — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedWithout — Bearing not greased
TIMKEN 6322OpenNot recordedNot recordedSteel cageNot recordedNot recorded
NSK 6322OpenNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 63/22OpenNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 6322OpenNot recordedNot recordedNot recordedNot recordedNot recorded
NACHI 63/22OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 6322/C3WithoutNot recordedC3Sheet metalBearing steelNone
SKF 6322/C3VL0241WithoutNot recordedC3Sheet metalBearing steelNone
SKF 6322/C4WithoutNot recordedC4Sheet metalBearing steelNone
SKF 6322/HC5C3WithoutNot recordedC3Sheet metalHybrid (ceramic balls)None
SKF 6322/HC5C3S0VA970WithoutNot recordedC3Sheet metalHybrid (ceramic balls)None
SKF 6322/HC5C3VA505WithoutNot recordedC3Sheet metalHybrid (ceramic balls)None
SKF 6322 MWithoutNormalCNMachined brassBearing steelNone
SKF 6322 M/C3WithoutNot recordedC3Machined brassBearing steelNone
SKF 6322 M/C3VL0241WithoutNot recordedC3Machined brassBearing steelNone
SKF 6322 M/C4VL0241WithoutNot recordedC4Machined brassBearing steelNone
FAG 6322-2RSR2RSR — Contact seal on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 6322-2RSR-L100-C32RSR — Contact seal on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedL100 — Grease (L100/customer specific)
FAG 6322-2Z2Z — Non-contact shield on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 6322-2Z-C32Z — Non-contact shield on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 6322-2Z-C42Z — Non-contact shield on both sidesPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3JN — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 6322-2Z-L038-C32Z — Non-contact shield on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedL038 — Grease (L038/customer specific)
FAG 6322-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-C4Without — Not sealedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3JN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-J20AAWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-J20AA-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-J20ABWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-J20AB-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-J20GA-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-MWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceM — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNM — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-C4Without — Not sealedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3M — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-J20AAWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceM — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-J20AA-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNM — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-J20AA-C4Without — Not sealedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3M — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-J20GA-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNM — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-M-J20GA-C4Without — Not sealedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3M — Solid brass cage, rolling element guidedNot recordedWithout — Bearing not greased
FAG 6322-ZZ — Non-contact shield on one SidePN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 6322-Z-C3Z — Non-contact shield on one SidePN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedWithout — Bearing not greased
TIMKEN 6322-2RSSealedNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 6322-C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 6322MOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 6322M-C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 6322-RS-C3SealedNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 6322-ZShieldedNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 6322-ZZShieldedNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 6322-ZZ-C3ShieldedNot recordedNot recordedSteel cageNot recordedNot recorded
NSK 6322ZZMetal shields on both sidesNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 6322 2RSContact sealedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 6322 2RUNon-contact sealedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 6322 ZZXShielded ZZNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

63/22

Deep groove ball bearing

View full technical record →SKF

6322

Deep groove ball bearing

View full technical record →FAG

6322

Deep groove ball bearing

View full technical record →TIMKEN

6322

Deep groove ball bearing

View full technical record →KOYO

63/22

Deep groove ball bearing

View full technical record →KOYO

6322

Deep groove ball bearing

View full technical record →NSK

6322

Deep groove ball bearing

View full technical record →NACHI

63/22

Deep groove ball bearing

View full technical record →NACHI

63/22-2NKE9

Deep groove ball bearing

View full technical record →NACHI

63/22-2NSE9

Deep groove ball bearing

View full technical record →KOYO

63/22 2RD

Deep groove ball bearing

View full technical record →TIMKEN

6322-2RS

Deep groove ball bearing

View full technical record →
Filter all 65 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search