Find · understand · compare
6208 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6208. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page7 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6208 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6208 | 40× | 1.5748× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6208 | 29100 / 17900 N | 10000 / 8700 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6208 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6208 | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208DDU | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208DDUNR | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208DU | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208M | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208N | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208NR | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208VV | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208Z | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208ZNR | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208ZZ | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
| NSK catalogue record6208ZZNR | 40 mm | 80 mm | 18 mm | Printed p. 49Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6208 dimensions and recorded technical data
The recorded 6208 base designation measures 40×80×18 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 161 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6208
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6208-2Z/C3 — 3 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 40.0 mm |
| Outside diameter | Not supplied separately | 80.0 mm |
| Width | Not supplied separately | 18.0 mm |
SKF 6208-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 80 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 18 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 52.6 mm |
| Recess diameter | D 2 | ≈ 69.8 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 47 mm |
| Diameter of shaft abutment | d a | max. 52.5 mm |
| Diameter of housing abutment | D a | max. 73 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
SKF 6208/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 40.0 mm |
| Outside diameter | Not supplied separately | 80.0 mm |
| Width | Not supplied separately | 18.0 mm |
SKF 6208 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 80 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 18 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 52.6 mm |
| Recess diameter | D 2 | ≈ 69.8 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 47 mm |
| Diameter of housing abutment | D a | max. 73 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
FAG 6208 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 67.6 mm |
| Caliber diameter outer ring | D2 | 70.36 mm |
| Shoulder diameter inner ring | d1 | 52.95 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 47 mm |
| Maximum diameter of housing shoulder | Da max | 73 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6208-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 67.6 mm |
| Caliber diameter outer ring | D2 | 70.36 mm |
| Shoulder diameter inner ring | d1 | 52.95 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 47 mm |
| Maximum diameter of housing shoulder | Da max | 73 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6208-Z — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 67.6 mm |
| Caliber diameter outer ring | D2 | 70.36 mm |
| Shoulder diameter inner ring | d1 | 52.95 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 47 mm |
| Maximum diameter of housing shoulder | Da max | 73 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6208-2Z-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 67.6 mm |
| Caliber diameter outer ring | D2 | 70.36 mm |
| Shoulder diameter inner ring | d1 | 52.95 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 47 mm |
| Maximum diameter of housing shoulder | Da max | 73 mm |
| Maximum fillet radius | ra max | 1 mm |
KOYO 6208 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
KOYO 6208 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 80 mm |
| Width | B | 18 mm |
TIMKEN 6208-RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 40 mm |
| O.D. (D) | D | 80 mm / 3.150 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6208-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 40 mm |
| O.D. (D) | D | 80 mm / 3.150 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6208 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 40 mm |
| O.D. (D) | D | 80 mm / 3.150 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6208-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 40 mm |
| O.D. (D) | D | 80 mm / 3.150 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6208-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 40 mm |
| O.D. (D) | D | 80 mm / 3.150 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
Catalogue parameters for 6208
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6208 — 45 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 40.0 mm |
| Outside diameter | Not separately recorded | 80.0 mm |
| Width | Not separately recorded | 18.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 32.5 kN |
| Basic static load rating | Not separately recorded | 19.0 kN |
| Reference speed | Not separately recorded | 18000.0 r/min |
| Limiting speed | Not separately recorded | 11000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 1.3 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.352 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 80 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 18 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 52.6 mm |
| Recess diameter | D 2 | ≈ 69.8 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 47 mm |
| Diameter of housing abutment | D a | max. 73 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 32.5 kN |
| Basic static load rating | C 0 | 19 kN |
| Fatigue load limit | P u | 0.8 kN |
| Reference speed | Not separately recorded | 18000 r/min |
| Limiting speed | Not separately recorded | 11000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 13.8 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 10 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 13 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P6 |
FAG 6208 — 48 recorded parameters
Deep groove ball bearing
Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Main Dimensions & Performance Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Bore diameter | d | 1.575 in |
| Outside diameter | D | 80 mm |
| Outside diameter | D | 3.15 in |
| Width | B | 18 mm |
| Width | B | 0.709 in |
| Basic dynamic load rating, radial | Cr | 31,000 N |
| Basic dynamic load rating, radial | Cr | 6,969.424 lbf |
| Basic static load rating, radial | C0r | 17,800 N |
| Basic static load rating, radial | C0r | 4,001.799 lbf |
| Fatigue load limit, radial | Cur | 1,080 N |
| Fatigue load limit, radial | Cur | 242.806 lbf |
| Limiting speed | nG | 12,300 1/min |
| Reference speed | nϑr | 9,300 1/min |
| Mass | ≈m | 353 g |
| Mass | ≈m | 12.451 oz |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 47 mm |
| Minimum diameter shaft shoulder | da min | 1.85 in |
| Maximum diameter of housing shoulder | Da max | 73 mm |
| Maximum diameter of housing shoulder | Da max | 2.874 in |
| Maximum fillet radius | ra max | 1 mm |
| Maximum fillet radius | ra max | 0.039 in |
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm |
| Minimum chamfer dimension | rmin | 0.043 in |
| Shoulder diameter outer ring | D1 | 67.6 mm |
| Shoulder diameter outer ring | D1 | 2.661 in |
| Caliber diameter outer ring | D2 | 70.36 mm |
| Caliber diameter outer ring | D2 | 2.77 in |
| Shoulder diameter inner ring | d1 | 52.95 mm |
| Shoulder diameter inner ring | d1 | 2.085 in |
Temperature range
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C |
| Operating temperature min. | Tmin | -22 °F |
| Operating temperature max. | Tmax | 120 °C |
| Operating temperature max. | Tmax | 248 °F |
Calculation factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Calculation factor | f0 | 14 |
Product characteristics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Capabilities & suitability
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Radial load capacity | Not separately recorded | Yes |
| Axial load capacity in one direction | Not separately recorded | Yes |
| Axial load capacity in both directions | Not separately recorded | Yes |
| Suitable for grease lubrication | Not separately recorded | Yes |
| Suitable for oil lubrication | Not separately recorded | Yes |
| Unsealed design | Not separately recorded | Yes |
KOYO 6208 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 40 mm |
| D | Not separately recorded | 80 mm |
| B | Not separately recorded | 18 mm |
| R(Min.) | Not separately recorded | 1.1 mm |
| Basic Load Ratings : Cr | Not separately recorded | 36.4 kN |
| Basic Load Ratings : C0R | Not separately recorded | 17.8 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 1.25 kN |
| Factor : F0 | Not separately recorded | 14.0 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 8300 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 10000 min-1 |
| Da(Min.) | Not separately recorded | 46.5 mm |
| Da(Max.) | Not separately recorded | 73.5 mm |
| Ra(Max.) | Not separately recorded | 1 mm |
| Mass(Refer.) | Not separately recorded | 0.366 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6208Deep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.352 kg352 g |
| FAG6208Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.353 kg353 g |
| TIMKEN6208Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| NSK6208Deep groove ball bearing |
| 32 kN | 17.9 kN | — | — | 0.366 kg366 g |
| KOYO6208Deep groove ball bearing |
| 36.4 kN | 17.8 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 10000 min-1 | 0.366 kg366 g |
| NACHI6208Deep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | 0.366 kg366 g |
| SKF6208-2RS1Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.365 kg365 g |
| SKF6208-2RS1/C3Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.365 kg365 g |
| SKF6208-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 5600 rpm | 0.365 kg365 g |
| SKF6208-2RS1/C3LTF9Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.375 kg375 g |
| SKF6208-2RS1/C3WTDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.365 kg365 g |
| SKF6208-2RS1/C4Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.365 kg365 g |
| SKF6208-2RS1/GFFDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | — | 0.365 kg365 g |
| SKF6208-2RS1/GJNDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 5600 rpm | 0.37 kg370 g |
| SKF6208-2RS1KDeep groove ball bearing with tapered bore and seals on both sides |
| 32.5 kN | 19 kN | 18000 rpm | 5600 rpm | 0.362 kg362 g |
| SKF6208-2RS1K/C3Deep groove ball bearing with tapered bore and seals on both sides |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.371 kg371 g |
| SKF6208-2RS1NDeep groove ball bearing |
| — | — | — | — | 0.359 kg359 g |
| SKF6208-2RS1NRDeep groove ball bearing with snap ring and integral sealing |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.373 kg373 g |
| SKF6208-2RS1TN9/C3VE167Deep groove ball bearing with snap ring groove and integral sealing |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.34 kg340 g |
| SKF6208-2RS2/C3WTDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 11000 rpm | 0.365 kg365 g |
| SKF6208 2RSJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.36 kg360 g |
| SKF6208 2RSNRJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.376 kg376 g |
| SKF6208-2RZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 30.7 kN | 19 kN | 22000 rpm | 11000 rpm | 0.313 kg313 g |
| SKF6208-2RZTN9/LHT23Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.353 kg353 g |
| SKF6208-2ZDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.367 kg367 g |
| SKF6208-2Z/C3Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.371 kg371 g |
| SKF6208-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.367 kg367 g |
| SKF6208-2Z/C3HTDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.367 kg367 g |
| SKF6208-2Z/C3WTDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.367 kg367 g |
| SKF6208-2Z/C4Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.368 kg368 g |
| SKF6208-2Z/GJNDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.367 kg367 g |
| SKF6208-2Z/HC5C3GJNHybrid ceramic deep groove ball bearing with seals on both sides |
| 30.7 kN | 19 kN | 22000 rpm | 11000 rpm | 0.337 kg337 g |
| SKF6208 2ZJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.367 kg367 g |
| SKF6208-2ZNRDeep groove ball bearing with snap ring and integral sealing |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.374 kg374 g |
| SKF6208 2ZNRJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.37 kg370 g |
| SKF6208-2ZTN9/C3GJNDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 9000 rpm | 0.37 kg370 g |
| SKF6208-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 19 kN | — | 70 rpm | 0.367 kg367 g |
| SKF6208-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 19 kN | — | 70 rpm | 0.36 kg360 g |
| SKF6208-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 19 kN | — | 150 rpm | 0.367 kg367 g |
| SKF6208/AXDDeep groove ball bearing |
| 39 kN | 19 kN | 18000 rpm | 11000 rpm | 0.365 kg365 g |
| SKF6208/C3Deep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.352 kg352 g |
| SKF6208/C3VE167Deep groove ball bearing with snap ring groove |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.344 kg344 g |
| SKF6208/C4Deep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.352 kg352 g |
| SKF6208/C4VQ557Deep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.352 kg352 g |
| SKF6208/HC5C3Hybrid ceramic deep groove ball bearing |
| 30.7 kN | 19 kN | 22000 rpm | 14000 rpm | 0.312 kg312 g |
| SKF6208 JEMDeep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.352 kg352 g |
| SKF6208 M/C3S0VQ335Deep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 16000 rpm | 0.417 kg417 g |
| SKF6208 NDeep groove ball bearing with snap ring groove |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.347 kg347 g |
| SKF6208 NRDeep groove ball bearing with snap ring |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.36 kg360 g |
| SKF6208 NR/C3Deep groove ball bearing with snap ring |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.36 kg360 g |
| SKF6208 NRJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.36 kg360 g |
| SKF6208-RS1Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.356 kg356 g |
| SKF6208 RSJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | — | 5600 rpm | 0.356 kg356 g |
| SKF6208 TN9/DBGADouble row deep groove ball bearing |
| 52.6 kN | 38 kN | 18000 rpm | 11000 rpm | 0.678 kg678 g |
| SKF6208 TN9/HC5C3Hybrid ceramic deep groove ball bearing |
| 30.7 kN | 19 kN | 22000 rpm | 14000 rpm | 0.339 kg339 g |
| SKF6208/VA201Deep groove ball bearing for high temperature applications |
| — | 19 kN | — | 70 rpm | 0.353 kg353 g |
| SKF6208-ZDeep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.357 kg357 g |
| SKF6208-Z/C3Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.357 kg357 g |
| SKF6208-Z/C3S0Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.37 kg370 g |
| SKF6208-Z/HC5C3Hybrid ceramic deep groove ball bearing with seals on both sides |
| 30.7 kN | 19 kN | 22000 rpm | 14000 rpm | 0.357 kg357 g |
| SKF6208 ZJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.357 kg357 g |
| SKF6208-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.365 kg365 g |
| SKF6208 ZNRJEMDeep groove ball bearing |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.368 kg368 g |
| SKF6208-ZTN9/C3Deep groove ball bearing with seals or shields |
| 32.5 kN | 19 kN | 18000 rpm | 11000 rpm | 0.345 kg345 g |
| FAG6208-2RSRDeep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.37 kg370 g |
| FAG6208-2RSR-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.37 kg370 g |
| FAG6208-2RSR-L038Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.38016 kg380.16 g |
| FAG6208-2RSR-L038-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.37 kg370 g |
| FAG6208-2RSR-L091-C4Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.38016 kg380.16 g |
| FAG6208-2RSR-L138-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.38016 kg380.16 g |
| FAG6208-2RSR-L207Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.37 kg370 g |
| FAG6208-2RSR-L207-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.37 kg370 g |
| FAG6208-2RSR-NDeep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.35541 kg355.41 g |
| FAG6208-2RSR-NRDeep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.3762 kg376.2 g |
| FAG6208-2ZDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.365 kg365 g |
| FAG6208-2Z-C2Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.37818 kg378.18 g |
| FAG6208-2Z-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.365 kg365 g |
| FAG6208-2Z-L038Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.37818 kg378.18 g |
| FAG6208-2Z-L038-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.37818 kg378.18 g |
| FAG6208-2Z-L069-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.372 kg372 g |
| FAG6208-2Z-L100Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.365 kg365 g |
| FAG6208-2Z-L100-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.37818 kg378.18 g |
| FAG6208-2Z-L138Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.37818 kg378.18 g |
| FAG6208-2Z-L138-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.36 kg360 g |
| FAG6208-2Z-L140-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.365 kg365 g |
| FAG6208-2Z-L207Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.365 kg365 g |
| FAG6208-2Z-L207-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.365 kg365 g |
| FAG6208-2Z-L285Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.36 kg360 g |
| FAG6208-2Z-L408-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.36828 kg368.28 g |
| FAG6208-2Z-N-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.36 kg360 g |
| FAG6208-2Z-NRDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 10400 rpm | 0.36 kg360 g |
| FAG6208-C-2BRS>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 11600 rpm | 0.36 kg360 g |
| FAG6208-C-2HRS-C3>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | — | 7800 rpm | 0.358 kg358 g |
| FAG6208-C-2HRS>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | — | 7800 rpm | 0.358 kg358 g |
| FAG6208-C-2Z-C3>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 11600 rpm | 0.365 kg365 g |
| FAG6208-C-2Z>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 11600 rpm | 0.359 kg359 g |
| FAG6208-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.36828 kg368.28 g |
| FAG6208-C4Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.36828 kg368.28 g |
| FAG6208-C-C3>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 13600 rpm | 0.34 kg340 g |
| FAG6208-C-CM>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 13600 rpm | 0.347 kg347 g |
| FAG6208-C-HRS-C3>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | — | 7800 rpm | 0.347 kg347 g |
| FAG6208-C-HRS>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | — | 7800 rpm | 0.347 kg347 g |
| FAG6208-C>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 13600 rpm | 0.337 kg337 g |
| FAG6208-C-Z-C3>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 13600 rpm | 0.347 kg347 g |
| FAG6208-C-Z>VDeep groove ball bearing |
| 33.5 kN | 17.8 kN | 10500 rpm | 13600 rpm | 0.345 kg345 g |
| FAG6208-H-2RSR-C3>NDeep groove ball bearing |
| 29.52 kN | 18.14 kN | — | 5100 rpm | 0.382 kg382 g |
| FAG6208-H-2RSR>NDeep groove ball bearing |
| 29.52 kN | 18.14 kN | — | 5100 rpm | 0.382 kg382 g |
| FAG6208-H-2Z-C3>NDeep groove ball bearing |
| 29.52 kN | 18.14 kN | 9300 rpm | 10400 rpm | 0.382 kg382 g |
| FAG6208-H-2Z>NDeep groove ball bearing |
| 29.52 kN | 18.14 kN | 9300 rpm | 10400 rpm | 0.382 kg382 g |
| FAG6208-H-C3>NDeep groove ball bearing |
| 29.52 kN | 18.14 kN | 9300 rpm | 12200 rpm | 0.372 kg372 g |
| FAG6208-H>NDeep groove ball bearing |
| 29.52 kN | 18.14 kN | 9300 rpm | 12200 rpm | 0.372 kg372 g |
| FAG6208-MDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 15900 rpm | 0.44847 kg448.47 g |
| FAG6208-NDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.341 kg341 g |
| FAG6208-N-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.3564 kg356.4 g |
| FAG6208-NRDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.371 kg371 g |
| FAG6208-NR-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.37125 kg371.25 g |
| FAG6208-RSRDeep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.37 kg370 g |
| FAG6208-RSR-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | — | 5000 rpm | 0.3663 kg366.3 g |
| FAG6208-ZDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.351 kg351 g |
| FAG6208-Z-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.351 kg351 g |
| FAG6208-Z-L038-C3Deep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.36 kg360 g |
| FAG6208-Z-NDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.35937 kg359.37 g |
| FAG6208-Z-NRDeep groove ball bearing |
| 31 kN | 17.8 kN | 9300 rpm | 12300 rpm | 0.38 kg380 g |
| TIMKEN6208-2RSDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RS-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RS-C3/VSL609Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RS-C4Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RS-NRDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RS/VSL609Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RZDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RZ-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-2RZ-NRDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-NRDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-NR-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-RSDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-RS-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208/VSL609Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-ZDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-Z-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-Z-NRDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-Z-NR-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-ZZDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-ZZ-C3Deep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| TIMKEN6208-ZZ-NRDeep groove ball bearing |
| 29.1 kN | 17.9 kN | — | — | 0.37 kg370 g |
| NSK6208DDUDeep groove ball bearing |
| 32 kN | 17.9 kN | — | — | — |
| NSK6208VVDeep groove ball bearing |
| 32 kN | 17.9 kN | — | — | — |
| NSK6208ZZDeep groove ball bearing |
| 32 kN | 17.9 kN | — | — | — |
| KOYO6208-12RSCSAutomotive bearing |
| — | — | — | — | 0.366 kg366 g |
| KOYO6208 2RDDeep groove ball bearing |
| 36.4 kN | 17.8 kN | — | 7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1 | 0.366 kg366 g |
| KOYO6208 2RSDeep groove ball bearing |
| 36.4 kN | 17.8 kN | — | 5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1 | 0.366 kg366 g |
| KOYO6208 2RUDeep groove ball bearing |
| 36.4 kN | 17.8 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1 | 0.366 kg366 g |
| KOYO6208C3+CR1Automotive bearing |
| — | — | — | — | — |
| KOYO6208NRDeep groove ball bearing |
| 36.4 kN | 17.8 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 10000 min-1 | 0.366 kg366 g |
| KOYO6208 ZZDeep groove ball bearing |
| 36.4 kN | 17.8 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1 | 0.366 kg366 g |
| NACHI6208-2NKE9Deep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | — |
| NACHI6208-2NSE9Deep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | — |
| NACHI6208NKE9Deep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | — |
| NACHI6208NSE9Deep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | — |
| NACHI6208ZEDeep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | — |
| NACHI6208ZZEDeep groove ball bearing |
| 36.5 kN | 17.9 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6208 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6208 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6208 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6208 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6208-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/C3LTF9 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/C3WT | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/C4 | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/GFF | Seal on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1K | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1K/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1N | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6208-2RS1NR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6208-2RS1TN9/C3VE167 | Seal on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6208-2RS2/C3WT | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6208 2RSNRJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6208-2RZTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6208-2RZTN9/LHT23 | Seal on both sides | Not recorded | CN | Non-metallic | Bearing steel | Grease |
| SKF 6208-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/C3HT | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/C3WT | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/C4 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/GJN | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6208-2Z/HC5C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6208 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6208-2ZNR | Shield on both sides | P6 and tighter width tolerance | CN | Not recorded | Bearing steel | Grease |
| SKF 6208 2ZNRJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6208-2ZTN9/C3GJN | Shield on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6208-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6208-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6208-2Z/VA228 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6208/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6208/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208/C3VE167 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6208/C4VQ557 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6208/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6208 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6208 M/C3S0VQ335 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6208 N | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6208 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6208 NR/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208 NRJEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6208-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6208 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208 TN9/DBGA | Without | Not recorded | CN | Non-metallic | Bearing steel | None |
| SKF 6208 TN9/HC5C3 | Without | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | None |
| SKF 6208/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6208-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6208-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208-Z/C3S0 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208-Z/HC5C3 | Shield on one side | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6208 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6208-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6208 ZNRJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6208-ZTN9/C3 | Shield on one side | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| FAG 6208-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6208-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6208-2RSR-L091-C4 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L091 — Grease (L091/customer specific) |
| FAG 6208-2RSR-L138-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6208-2RSR-L207 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6208-2RSR-L207-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6208-2RSR-N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2RSR-NR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2Z-C2 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2Z-L038 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6208-2Z-L038-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6208-2Z-L069-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6208-2Z-L100 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6208-2Z-L100-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6208-2Z-L138 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6208-2Z-L138-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6208-2Z-L140-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6208-2Z-L207 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6208-2Z-L207-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6208-2Z-L285 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L285 — Grease (L285/customer specific) |
| FAG 6208-2Z-L408-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L408 — Grease (L408/customer specific) |
| FAG 6208-2Z-N-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-2Z-NR | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6208-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C-CM>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6208-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6208-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6208-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6208-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6208-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-NR | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-NR-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-RSR-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-Z-L038-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6208-Z-N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6208-Z-NR | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6208-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RS-C4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6208-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6208DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6208VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6208ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208-12RSCS | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208C3+CR1 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6208 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6208ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6208
Deep groove ball bearing
View full technical record →FAG6208
Deep groove ball bearing
View full technical record →TIMKEN6208
Deep groove ball bearing
View full technical record →KOYO6208
Deep groove ball bearing
View full technical record →NSK6208
Deep groove ball bearing
View full technical record →NACHI6208
Deep groove ball bearing
View full technical record →KOYO6208-12RSCS
Automotive bearing
View full technical record →NACHI6208-2NKE9
Deep groove ball bearing
View full technical record →NACHI6208-2NSE9
Deep groove ball bearing
View full technical record →KOYO6208 2RD
Deep groove ball bearing
View full technical record →TIMKEN6208-2RS
Deep groove ball bearing
View full technical record →KOYO6208 2RS
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.