6206 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6206. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page8 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6206 — published size and closure variants
6206 is the base grouping for the specific records below. Read the complete designation and publisher on each row. The source unit is retained beside the converted unit. A shield or seal can change the width; equal bore and outside diameter do not establish the same envelope.
3 source-labelled records; 3 shown initially.
| Publisher / full model | Closure / material | d×D×B in mm | d×D×B in inches | Source unit |
|---|---|---|---|---|
| SMB6206 | OpenChrome steel | 30× | 1.181102× | mm |
| SMB6206ZZ | ShieldedChrome steel | 30× | 1.181102× | mm |
| SMB6206-2RS | SealedChrome steel | 30× | 1.181102× | mm |
Keep RS, 2RS, ZZ and width suffixes distinct
The table records the publisher’s open, shielded or sealed column. An unlisted “RS” marking is not rewritten as “2RS”. Keep special endings such as W21, W23 or a fractional bore suffix: they can identify a different width or bore. No automatic cross-brand substitution is approved.
Metric values converted from printed inch decimals inherit the source rounding. For example, 0.2812 in converts to 7.14248 mm; that extra decimal detail is arithmetic, not a tolerance or a machining target. Never silently round an inch bearing into the nearest metric size. Missing speed, clearance, precision, internal ball diameter, material grade or exact lubricant remain unknown.
Publisher references: SMB product charts and Enduro 1600-series data; checked 2026-10-02. Original BearingScope interpretation. No stock, sales, vehicle fitment or redistributable CAD is implied. Material names describe the source page, not a certificate for every item sold under a similar number.
6206 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6206 | 30× | 1.1811× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6206 | 19500 / 11300 N | 13000 / 11000 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6206 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6206 | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206DDU | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206DDUNR | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206DU | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206NR | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206VV | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206Z | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206ZNR | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206ZZ | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
| NSK catalogue record6206ZZNR | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6206 dimensions and recorded technical data
The recorded 6206 base designation measures 30×62×16 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 179 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6206
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6206 NR — 21 dimension fields
Deep groove ball bearing with snap ring. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 40.36 mm |
| Recess diameter | D 2 | ≈ 54.06 mm |
| Diameter of snap ring groove | D 3 | 59.61 mm |
| Outside diameter of snap ring | D 4 | 67.7 mm |
| Width of snap ring groove | b | 1.9 mm |
| Distance from outer ring side face to snap ring groove | C | 3.28 mm |
| Width of snap ring | f | 1.7 mm |
| Bottom radius of snap ring groove | r 0 | max. 0.6 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 35.6 mm |
| Diameter of housing abutment | D a | max. 56.4 mm |
| Diameter of snap ring recess in the housing | D b | min. 69 mm |
| Width of snap ring recess in the housing | b a | min. 2.2 mm |
| Distance from outer ring side face to snap ring back face | C a | max. 4.98 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
SKF 6206-2RZ — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 40.36 mm |
| Recess diameter | D 2 | ≈ 54.06 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 35.6 mm |
| Diameter of shaft abutment | d a | max. 40.3 mm |
| Diameter of housing abutment | D a | max. 56.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
SKF 6206-2Z/C3 — 3 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 30.0 mm |
| Outside diameter | Not supplied separately | 62.0 mm |
| Width | Not supplied separately | 16.0 mm |
SKF 6206/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 30.0 mm |
| Outside diameter | Not supplied separately | 62.0 mm |
| Width | Not supplied separately | 16.0 mm |
SKF 6206/C4 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 30.0 mm |
| Outside diameter | Not supplied separately | 62.0 mm |
| Width | Not supplied separately | 16.0 mm |
SKF 6206 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 40.36 mm |
| Recess diameter | D 2 | ≈ 54.06 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 35.6 mm |
| Diameter of housing abutment | D a | max. 56.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
KOYO 6206 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 62 mm |
| Width | B | 16 mm |
KOYO 6206 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 62 mm |
| Width | B | 16 mm |
KOYO 6206NR — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 62 mm |
| Width | B | 16 mm |
TIMKEN 6206-2RS-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6206-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6206 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6206-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6206-NR — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6206-2RZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
Catalogue parameters for 6206
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6206 — 45 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
SKF 6206 dimensional tolerances: the nominal bearing size is not the finished shaft or housing size. The following limits are calculated from this exact product record by adding the signed deviation to the nominal bearing dimension.
Bore mid-range size: nominal 30 mm; recorded deviation -0.008 to 0 mm; calculated interval 29.992–30.000 mm. Source symbol: t Δdmp.
Outside-diameter mid-range size: nominal 62 mm; recorded deviation -0.011 to 0 mm; calculated interval 61.989–62.000 mm. Source symbol: t ΔDmp.
Ring width: nominal 16 mm; recorded deviation -0.06 to 0 mm; calculated interval 15.940–16.000 mm. Source symbol: t ΔBs.
The source lists dimensional class "P6 and tighter width tolerance" and geometrical class "P6" separately. Do not collapse those two statements into one ABEC label or transfer them to another brand or suffix.
For cylindrical bores, the mid-range diameter is formed from the largest and smallest two-point sizes in a cross-section. Its allowable deviation is not a limit on every individual two-point measurement. Form variation and run-out are separate checks (SKF Rolling bearings, Table 13, printed pages 49–50).
A shaft/housing fit must be chosen separately for load direction, ring rotation, temperature and installation conditions. These bearing dimensions alone do not approve H7, k6, an interference fit, or an operating clearance.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 30.0 mm |
| Outside diameter | Not separately recorded | 62.0 mm |
| Width | Not separately recorded | 16.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 20.3 kN |
| Basic static load rating | Not separately recorded | 11.2 kN |
| Reference speed | Not separately recorded | 24000.0 r/min |
| Limiting speed | Not separately recorded | 15000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.71 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.193 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 40.36 mm |
| Recess diameter | D 2 | ≈ 54.06 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 35.6 mm |
| Diameter of housing abutment | D a | max. 56.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 20.3 kN |
| Basic static load rating | C 0 | 11.2 kN |
| Fatigue load limit | P u | 0.475 kN |
| Reference speed | Not separately recorded | 24000 r/min |
| Limiting speed | Not separately recorded | 15000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 13.8 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 8 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 13 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P6 |
KOYO 6206 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
The plain KOYO 6206 record is open. For a sealed candidate, inspect the separate KOYO 6206 2RS record; for a shielded candidate, inspect KOYO 6206 ZZ. Both are listed in this page’s exact-designation references with their own parameters. The base number alone does not specify a closure.
These are distinct catalogue constructions, not a suggestion to add a loose seal to an open bearing. Seal replacement or removal requires the original assembly information; no loose-seal part number or equipment fitment is established by these records.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 30 mm |
| D | Not separately recorded | 62 mm |
| B | Not separately recorded | 16 mm |
| R(Min.) | Not separately recorded | 1 mm |
| Basic Load Ratings : Cr | Not separately recorded | 24.3 kN |
| Basic Load Ratings : C0R | Not separately recorded | 11.3 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.800 kN |
| Factor : F0 | Not separately recorded | 13.9 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 11000 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 13000 min-1 |
| Da(Min.) | Not separately recorded | 35 mm |
| Da(Max.) | Not separately recorded | 57 mm |
| Ra(Max.) | Not separately recorded | 1 mm |
| Mass(Refer.) | Not separately recorded | 0.199 kg |
NSK 6206 — 15 recorded parameters
Single row deep groove ball bearings
Reference: NSK Rolling Bearings catalogue E1103c, Part C; source snapshot 2026-10-02.
For this exact NSK 6206 record, the nominal envelope is 30×62×16 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.
Calculated inch equivalent: 1.181102×2.440945×0.629921 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.
Recorded closure for 6206: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.
Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.
Boundary dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 62 mm |
| Bearing width | B | 16 mm |
| Minimum bearing chamfer | r min. | 1 mm |
Load ratings
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 21400 N |
| Basic static radial load rating | C0r | 11300 N |
| Equivalent-load calculation factor | f0 | 13.8 |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 35 mm |
| Maximum shaft shoulder diameter | da max. | 38.5 mm |
| Maximum housing shoulder diameter | Da max. | 57 mm |
| Maximum shaft or housing fillet radius | ra max. | 1 mm |
Lubrication-qualified speed
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Limiting speed with grease | Not separately recorded | 12000 r/min |
| Limiting speed with oil (open bearing) | Not separately recorded | 15000 r/min |
Reference mass
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Approximate catalogue mass (open reference) | Not separately recorded | 0.199 kg |
Construction
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue closure construction | Not separately recorded | Open |
NACHI 6206 — 15 recorded parameters
Deep groove ball bearing
Reference: NACHI Deep Groove Ball Bearings catalogue B3402E-2; source snapshot 2026-10-02.
For this exact NACHI 6206 record, the nominal envelope is 30×62×16 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.
Calculated inch equivalent: 1.181102×2.440945×0.629921 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.
Recorded closure for 6206: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.
Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.
Boundary dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 62 mm |
| Bearing width | B | 16 mm |
| Minimum bearing chamfer | r min. | 1 mm |
Load ratings
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 24500 N |
| Basic static radial load rating | C0r | 11300 N |
Equivalent-load factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue load calculation factor | f0 | 13.9 |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 36 mm |
| Maximum housing shoulder diameter | Da max. | 56 mm |
| Maximum adjacent fillet radius | ra max. | 1 mm |
Construction
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Closure arrangement | Not separately recorded | Open |
| Listed closure suffix | Not separately recorded | None (open type) |
Reference mass
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue row mass (variants not individually specified) | Not separately recorded | 0.199 kg |
Lubrication-qualified speed
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Limiting speed with grease (open) | Not separately recorded | 11000 r/min |
| Limiting speed with oil (open) | Not separately recorded | 13000 r/min |
KOYO 6206 2RS — 16 recorded parameters
Deep groove ball bearing
Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.
Looking for a 6206 sealed bearing? KOYO 6206 2RS is a recorded catalogue candidate with contact seals on both sides. Its recorded nominal size is 30×62×16 mm, in the order bore d × outside diameter D × width B.
In JTEKT / KOYO Table 6-2, 2RS identifies contact seals on both sides. The corresponding one-sided code is RS. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6206 base record into a sealed or shielded version.
Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.
The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.
Classification
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Official Category Path | Not separately recorded | Deep groove ball bearings - Single-row - Shielded/sealed type - Contact sealed |
| Official Classification 1 | Not separately recorded | Deep groove ball bearings / Single-row / Shielded/sealed type / Contact sealed |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 30 mm |
| D | Not separately recorded | 62 mm |
| B | Not separately recorded | 16 mm |
| R(Min.) | Not separately recorded | 1 mm |
| Basic Load Ratings : Cr | Not separately recorded | 24.3 kN |
| Basic Load Ratings : C0R | Not separately recorded | 11.3 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.800 kN |
| Factor : F0 | Not separately recorded | 13.9 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 7000 min-1 |
| Da(Min.) | Not separately recorded | 35 mm |
| Da(Max.) | Not separately recorded | 37.5 mm |
| Da(Max.) | Not separately recorded | 57 mm |
| Ra(Max.) | Not separately recorded | 1 mm |
| Mass(Refer.) | Not separately recorded | 0.199 kg |
KOYO 6206 ZZ — 16 recorded parameters
Deep groove ball bearing
Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.
Looking for a 6206 shielded bearing? KOYO 6206 ZZ is a recorded catalogue candidate with fixed shields on both sides. Its recorded nominal size is 30×62×16 mm, in the order bore d × outside diameter D × width B.
In JTEKT / KOYO Table 6-2, ZZ identifies fixed shields on both sides. The corresponding one-sided code is Z. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6206 base record into a sealed or shielded version.
Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.
The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.
Classification
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Official Category Path | Not separately recorded | Deep groove ball bearings - Single-row - Shielded/sealed type - Shielded ZZ |
| Official Classification 1 | Not separately recorded | Deep groove ball bearings / Single-row / Shielded/sealed type / Shielded ZZ |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 30 mm |
| D | Not separately recorded | 62 mm |
| B | Not separately recorded | 16 mm |
| R(Min.) | Not separately recorded | 1 mm |
| Basic Load Ratings : Cr | Not separately recorded | 24.3 kN |
| Basic Load Ratings : C0R | Not separately recorded | 11.3 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.800 kN |
| Factor : F0 | Not separately recorded | 13.9 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 11000 min-1 |
| Da(Min.) | Not separately recorded | 35 mm |
| Da(Max.) | Not separately recorded | 37.5 mm |
| Da(Max.) | Not separately recorded | 57 mm |
| Ra(Max.) | Not separately recorded | 1 mm |
| Mass(Refer.) | Not separately recorded | 0.199 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6206Deep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.193 kg193 g |
| TIMKEN6206Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| NSK6206Deep groove ball bearing |
| 21.4 kN | 11.3 kN | — | — | 0.199 kg199 g |
| KOYO6206Deep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.199 kg199 g |
| NACHI6206Deep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | 0.199 kg199 g |
| SKF6206-2RS1Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 8000 rpm | 0.2 kg200 g |
| SKF6206-2RS1/C2Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.2 kg200 g |
| SKF6206-2RS1/C3Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 8000 rpm | 0.2 kg200 g |
| SKF6206-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 7500 rpm | 0.2 kg200 g |
| SKF6206-2RS1/C4Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 7500 rpm | 0.2 kg200 g |
| SKF6206-2RS1/GJNDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.2 kg200 g |
| SKF6206-2RS1KDeep groove ball bearings |
| — | — | — | — | 0.198 kg198 g |
| SKF6206-2RS1NRDeep groove ball bearing with snap ring and integral sealing |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.205 kg205 g |
| SKF6206-2RS1/W64Deep groove ball bearing |
| 20.3 kN | 11.2 kN | — | 5200 rpm | 0.2 kg200 g |
| SKF6206-2RS2/C3GJNDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 8000 rpm | 0.2 kg200 g |
| SKF6206-2RS2/C3S1GHEDeep groove ball bearing with seals or shields |
| 20.3 kN | 10.6 kN | 24000 rpm | 15000 rpm | 0.198 kg198 g |
| SKF6206-2RS2/C3S1GWPDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 8000 rpm | 0.198 kg198 g |
| SKF6206-2RSF/C3GJN7SKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.21 kg210 g |
| SKF6206-2RSF/C3GJN7/AGSKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.21 kg210 g |
| SKF6206-2RSF/C3GJN8SKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.211 kg211 g |
| SKF6206-2RSF/C3GJN8/AGSKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.211 kg211 g |
| SKF6206-2RSF/C4GJN7SKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.21 kg210 g |
| SKF6206-2RSF/C4GJN7/AGSKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.21 kg210 g |
| SKF6206-2RSF/GJN7SKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.21 kg210 g |
| SKF6206-2RSF/GJN7/AGSKF Deep groove ball bearing for highly contaminated environments |
| 20.3 kN | 11.2 kN | — | 3500 rpm | 0.21 kg210 g |
| SKF6206-2RSH/VA947SKF Food line deep groove ball bearing with seals |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.205 kg205 g |
| SKF6206 2RSJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.2 kg200 g |
| SKF6206 2RSNRJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.204 kg204 g |
| SKF6206-2RZDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2RZ/C3GJNDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.198 kg198 g |
| SKF6206-2RZTN9/C3VT162Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.195 kg195 g |
| SKF6206-2RZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 19.5 kN | 11.2 kN | 28000 rpm | 15000 rpm | 0.173 kg173 g |
| SKF6206-2ZDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/C3Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/C3GWPDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/C3LHT23Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/C3WTDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/C4Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2Z/GJNDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206 2ZJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206-2ZNRDeep groove ball bearing with snap ring and integral sealing |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.206 kg206 g |
| SKF6206 2ZNRJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.206 kg206 g |
| SKF6206-2ZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 15000 rpm | 0.173 kg173 g |
| SKF6206-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 11.2 kN | — | 100 rpm | 0.207 kg207 g |
| SKF6206-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 11.2 kN | — | 90 rpm | 0.193 kg193 g |
| SKF6206-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 11.2 kN | — | 190 rpm | 0.201 kg201 g |
| SKF6206/AXDDeep groove ball bearing |
| 24.7 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.198 kg198 g |
| SKF6206/C2Deep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.193 kg193 g |
| SKF6206/C3Deep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.193 kg193 g |
| SKF6206/C4Deep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.193 kg193 g |
| SKF6206 ETN9Deep groove ball bearing |
| 23.4 kN | 12.9 kN | 24000 rpm | 15000 rpm | 0.181 kg181 g |
| SKF6206 ETN9/C3Deep groove ball bearing |
| 23.4 kN | 12.9 kN | 24000 rpm | 15000 rpm | 0.181 kg181 g |
| SKF6206/HC5C3Hybrid ceramic deep groove ball bearing |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.173 kg173 g |
| SKF6206 JEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.193 kg193 g |
| SKF6206 MA/C3S0Deep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 22000 rpm | 0.225 kg225 g |
| SKF6206 NDeep groove ball bearing with snap ring groove |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.189 kg189 g |
| SKF6206 N/C3Deep groove ball bearing with snap ring groove |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.189 kg189 g |
| SKF6206 NRDeep groove ball bearing with snap ring |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.198 kg198 g |
| SKF6206 NRJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.198 kg198 g |
| SKF6206-RS1Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.194 kg194 g |
| SKF6206-RS1/C3Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.194 kg194 g |
| SKF6206 RSJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | — | 7500 rpm | 0.194 kg194 g |
| SKF6206-RZDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 12000 rpm | 0.201 kg201 g |
| SKF6206 TN9/C3Deep groove ball bearing |
| 20.3 kN | 11.2 kN | — | — | 0.187 kg187 g |
| SKF6206 TN9/C4Deep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.187 kg187 g |
| SKF6206 TN9/HC5C3Hybrid ceramic deep groove ball bearing |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.18 kg180 g |
| SKF6206/VA201Deep groove ball bearing for high temperature applications |
| — | 11.2 kN | — | 100 rpm | 0.192 kg192 g |
| SKF6206-ZDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.196 kg196 g |
| SKF6206-Z/C3Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.196 kg196 g |
| SKF6206-Z/HC5Hybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.183 kg183 g |
| SKF6206-Z/HC5C3Hybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.175 kg175 g |
| SKF6206 ZJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.196 kg196 g |
| SKF6206-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.201 kg201 g |
| SKF6206-ZTN9/HC5C3Hybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.187 kg187 g |
| FAG6206-C-2BRS-L038-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2BRS-L069-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2BRS-L069-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2BRS-L091-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2BRS-TVH-L178-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.184 kg184 g |
| FAG6206-C-2BRS>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.195 kg195 g |
| FAG6206-C-2HRS-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.192 kg192 g |
| FAG6206-C-2HRS-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.193 kg193 g |
| FAG6206-C-2HRS-L038-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.192 kg192 g |
| FAG6206-C-2HRS-L038-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.194 kg194 g |
| FAG6206-C-2HRS-L038>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.194 kg194 g |
| FAG6206-C-2HRS-L069-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.193 kg193 g |
| FAG6206-C-2HRS-L069>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.194 kg194 g |
| FAG6206-C-2HRS-L091-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.192 kg192 g |
| FAG6206-C-2HRS-L100-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.193 kg193 g |
| FAG6206-C-2HRS-L100-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.192 kg192 g |
| FAG6206-C-2HRS-L138-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.193 kg193 g |
| FAG6206-C-2HRS-L138-CM>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.194 kg194 g |
| FAG6206-C-2HRS-L140-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.192 kg192 g |
| FAG6206-C-2HRS-L207-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.192 kg192 g |
| FAG6206-C-2HRS-L207>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.194 kg194 g |
| FAG6206-C-2HRS-L408-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.191 kg191 g |
| FAG6206-C-2HRS-N-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.191 kg191 g |
| FAG6206-C-2HRS>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-C2>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2Z-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.195 kg195 g |
| FAG6206-C-2Z-L038-C2>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-L038-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.19 kg190 g |
| FAG6206-C-2Z-L038-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-L038>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.191 kg191 g |
| FAG6206-C-2Z-L069-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.191 kg191 g |
| FAG6206-C-2Z-L069-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-L069-CM>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2Z-L069>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-L100-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2Z-L138-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2Z-L138-CM>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z-L138>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.191 kg191 g |
| FAG6206-C-2Z-L207-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.194 kg194 g |
| FAG6206-C-2Z-L408-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-2Z-L506-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.193 kg193 g |
| FAG6206-C-2Z>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 15100 rpm | 0.192 kg192 g |
| FAG6206-C-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 17800 rpm | 0.18 kg180 g |
| FAG6206-C-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 17800 rpm | 0.18 kg180 g |
| FAG6206-C-HRS-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.185 kg185 g |
| FAG6206-C-HRS-C4>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.195 kg195 g |
| FAG6206-C-HRS>VDeep groove ball bearing |
| 22 kN | 11.3 kN | — | 10200 rpm | 0.186 kg186 g |
| FAG6206-C>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 17800 rpm | 0.18 kg180 g |
| FAG6206-C-Z-C3>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 17800 rpm | 0.185 kg185 g |
| FAG6206-C-Z>VDeep groove ball bearing |
| 22 kN | 11.3 kN | 13400 rpm | 17800 rpm | 0.185 kg185 g |
| FAG6206-H-2RSR-C3>NDeep groove ball bearing |
| 19.8 kN | 12.8 kN | — | 6600 rpm | 0.201 kg201 g |
| FAG6206-H-2RSR>NDeep groove ball bearing |
| 19.8 kN | 12.8 kN | — | 6600 rpm | 0.201 kg201 g |
| FAG6206-H-2Z-C3>NDeep groove ball bearing |
| 19.8 kN | 12.8 kN | 11800 rpm | 13600 rpm | 0.201 kg201 g |
| FAG6206-H-2Z>NDeep groove ball bearing |
| 19.8 kN | 12.8 kN | 11800 rpm | 13600 rpm | 0.201 kg201 g |
| FAG6206-H-C3>NDeep groove ball bearing |
| 19.8 kN | 12.8 kN | 11800 rpm | 16000 rpm | 0.195 kg195 g |
| FAG6206-H>NDeep groove ball bearing |
| 19.8 kN | 12.8 kN | 11800 rpm | 16000 rpm | 0.195 kg195 g |
| TIMKEN6206-2RSDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS-C3/VSL609Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS-C4Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS-N-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS-NR-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RS/VSL609Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RZDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RZ-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RZ-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-2RZ-NR-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206HDeep groove ball bearing |
| 16.5 kN | 9.07 kN | — | — | 0.2 kg200 g |
| TIMKEN6206H/FVSL525Deep groove ball bearing |
| 16.5 kN | 9.07 kN | — | — | 0.2 kg200 g |
| TIMKEN6206H/FVSL527Deep groove ball bearing |
| 16.5 kN | 9.07 kN | — | — | 0.2 kg200 g |
| TIMKEN6206H/FVSL613Deep groove ball bearing |
| 16.5 kN | 9.07 kN | — | — | 0.2 kg200 g |
| TIMKEN6206H/VSL609Deep groove ball bearing |
| 16.5 kN | 9.07 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-NR-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-RSDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-RS-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206/VSL609Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-Z-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-Z-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-Z-NR-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZZDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZZ-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZZ-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| NSK6206DDUDeep groove ball bearing |
| 21.4 kN | 11.3 kN | — | — | — |
| NSK6206VVDeep groove ball bearing |
| 21.4 kN | 11.3 kN | — | — | — |
| NSK6206ZZDeep groove ball bearing |
| 21.4 kN | 11.3 kN | — | — | — |
| KOYO6206 2RDDeep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 9900 rpmLimiting Speeds(Grease Lub.): 9900 min-1 | 0.199 kg199 g |
| KOYO6206 2RSDeep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 7000 rpmLimiting Speeds(Grease Lub.): 7000 min-1 | 0.199 kg199 g |
| KOYO6206 2RUDeep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1 | 0.199 kg199 g |
| KOYO6206NRDeep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.199 kg199 g |
| KOYO6206RDeep groove ball bearing |
| 29.2 kN | 12.8 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.212 kg212 g |
| KOYO6206RS-1C4Automotive bearing |
| — | — | — | — | 0.201 kg201 g |
| KOYO6206 ZZDeep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1 | 0.199 kg199 g |
| NACHI6206-2NKE9Deep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NACHI6206-2NSE9Deep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NACHI6206NKE9Deep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NACHI6206NSE9Deep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NACHI6206ZEDeep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NACHI6206ZZEDeep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NTN6206LUDeep groove ball bearing |
| 21.6 kN | 11.3 kN | — | — | 0.199 kg199 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6206 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6206 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6206 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6206-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1/C2 | Seal on both sides | Not recorded | C2 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1/C4 | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1K | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6206-2RS1NR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS1/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6206-2RS2/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS2/C3S1GHE | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RS2/C3S1GWP | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/C3GJN7 | Seal on both sides | P6 and tighter width tolerance | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/C3GJN7/AG | Seal on both sides | P6 and tighter width tolerance | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/C3GJN8 | Seal on both sides | P6 and tighter width tolerance | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/C3GJN8/AG | Seal on both sides | P6 and tighter width tolerance | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/C4GJN7 | Seal on both sides | P6 and tighter width tolerance | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/C4GJN7/AG | Seal on both sides | P6 and tighter width tolerance | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/GJN7 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSF/GJN7/AG | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RSH/VA947 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Food grade grease |
| SKF 6206 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6206 2RSNRJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6206-2RZ | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RZ/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2RZTN9/C3VT162 | Seal on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6206-2RZTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6206-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/C3GWP | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/C3LHT23 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/C3WT | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/C4 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6206-2Z/GJN | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6206-2ZNR | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6206 2ZNRJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6206-2ZTN9/HC5C3WT | Shield on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6206-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6206-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6206-2Z/VA228 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6206/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206/C2 | Without | Not recorded | C2 | Sheet metal | Bearing steel | None |
| SKF 6206/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6206/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6206 ETN9 | Without | Normal | CN | Non-metallic | Bearing steel | None |
| SKF 6206 ETN9/C3 | Without | Not recorded | C3 | Non-metallic | Bearing steel | None |
| SKF 6206/HC5C3 | Without | Not recorded | CN | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6206 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6206 MA/C3S0 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6206 N | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206 N/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6206 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206 NRJEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6206-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206-RS1/C3 | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6206 RSJEM | Seal on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6206-RZ | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206 TN9/C3 | Without | Not recorded | C3 | Non-metallic | Bearing steel | None |
| SKF 6206 TN9/C4 | Without | Not recorded | C4 | Non-metallic | Bearing steel | None |
| SKF 6206 TN9/HC5C3 | Without | Not recorded | CN | Non-metallic | Hybrid (ceramic balls) | None |
| SKF 6206/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6206-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6206-Z/HC5 | Shield on one side | Not recorded | CN | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6206-Z/HC5C3 | Shield on one side | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6206 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6206-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206-ZTN9/HC5C3 | Shield on one side | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| FAG 6206-C-2BRS-L038-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2BRS-L069-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2BRS-L069-C4>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2BRS-L091-C4>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L091 — Grease (L091/customer specific) |
| FAG 6206-C-2BRS-TVH-L178-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | L178 — Grease (L178/customer specific) |
| FAG 6206-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2HRS-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2HRS-L038-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2HRS-L069-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2HRS-L069>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2HRS-L091-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L091 — Grease (L091/customer specific) |
| FAG 6206-C-2HRS-L100-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6206-C-2HRS-L100-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6206-C-2HRS-L138-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6206-C-2HRS-L138-CM>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6206-C-2HRS-L140-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6206-C-2HRS-L207-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6206-C-2HRS-L207>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6206-C-2HRS-L408-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L408 — Grease (L408/customer specific) |
| FAG 6206-C-2HRS-N-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2Z-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2Z-C4>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-2Z-L038-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2Z-L038-C4>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6206-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2Z-L069-C4>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2Z-L069-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2Z-L069>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6206-C-2Z-L100-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6206-C-2Z-L138-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6206-C-2Z-L138-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6206-C-2Z-L138>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6206-C-2Z-L207-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6206-C-2Z-L408-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L408 — Grease (L408/customer specific) |
| FAG 6206-C-2Z-L506-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L506 — Grease (L506/customer specific) |
| FAG 6206-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6206-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C-C4>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C-HRS-C4>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6206-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6206-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6206-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6206-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6206-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6206-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS-C4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS-N-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-2RZ-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206H | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6206H/FVSL525 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6206H/FVSL527 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6206H/FVSL613 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6206H/VSL609 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6206DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6206VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6206ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206R | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206RS-1C4 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NTN 6206LU | contact seal on one side | Not recorded | CN | pressed steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6206
Deep groove ball bearing
View full technical record →TIMKEN6206
Deep groove ball bearing
View full technical record →KOYO6206
Deep groove ball bearing
View full technical record →NSK6206
Deep groove ball bearing
View full technical record →NACHI6206
Deep groove ball bearing
View full technical record →TIMKEN620 / 612
Tapered roller bearing
View full technical record →TIMKEN620 / 612A
Tapered roller bearing
View full technical record →TIMKEN620 / 612-S
Tapered roller bearing
View full technical record →TIMKEN620 / 613-S
Tapered roller bearing
View full technical record →TIMKEN620 / 614X
Tapered roller bearing
View full technical record →NACHI6206-2NKE9
Deep groove ball bearing
View full technical record →NACHI6206-2NSE9
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.