Find · understand · compare

6202 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6202. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page8 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Catalogue variant evidence

6202 — published size and closure variants

6202 is the base grouping for the specific records below. Read the complete designation and publisher on each row. The source unit is retained beside the converted unit. A shield or seal can change the width; equal bore and outside diameter do not establish the same envelope.

3 source-labelled records; 3 shown initially.

Publisher / full model	Closure / material	d×D×B in mm	d×D×B in inches	Source unit
SMB6202	OpenChrome steel	15×35×11 mm	0.590551×1.377953×0.433071 in	mm
SMB6202ZZ	ShieldedChrome steel	15×35×11 mm	0.590551×1.377953×0.433071 in	mm
SMB6202-2RS	SealedChrome steel	15×35×11 mm	0.590551×1.377953×0.433071 in	mm

Page 1

Keep RS, 2RS, ZZ and width suffixes distinct

The table records the publisher’s open, shielded or sealed column. An unlisted “RS” marking is not rewritten as “2RS”. Keep special endings such as W21, W23 or a fractional bore suffix: they can identify a different width or bore. No automatic cross-brand substitution is approved.

Metric values converted from printed inch decimals inherit the source rounding. For example, 0.2812 in converts to 7.14248 mm; that extra decimal detail is arithmetic, not a tolerance or a machining target. Never silently round an inch bearing into the nearest metric size. Missing speed, clearance, precision, internal ball diameter, material grade or exact lubricant remain unknown.

Publisher references: SMB product charts and Enduro 1600-series data; checked 2026-10-02. Original BearingScope interpretation. No stock, sales, vehicle fitment or redistributable CAD is implied. Material names describe the source page, not a certificate for every item sold under a similar number.

Metric and inch variant directory Main catalogue dimension finder Exact unit conversion Closure-selection guide

Source-labelled catalogue reference

6202 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 6200 series6202	15×35×11 mmPrinted metric row	.5906×1.3780×.4331 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
6202	7740 / 3732 N	26000 / 20000 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

NSK historical dimension lookup

6202 — source-labelled NSK dimensions

Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.

Single-row radial ball bearing dimensions — all values in millimetres
Complete NSK designation	Bore d	Outside D	Width B	Source page / boundary
NSK catalogue record6202	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202DDU	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202DDUNR	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202DU	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202NR	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202VV	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202Z	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202ZNR	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202ZZ	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked
NSK catalogue record6202ZZNR	15 mm	35 mm	11 mm	Printed p. 32Nominal envelope only; complete execution as marked

Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.

Search all NSK historical dimension rows Understand seal and shield choices Check a replacement candidate

Exact model evidence

6202 dimensions and recorded technical data

The recorded 6202 base designation measures 15×35×11 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 144 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6202

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6202-2Z/C3 — 3 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	15.0 mm
Outside diameter	Not supplied separately	35.0 mm
Width	Not supplied separately	11.0 mm

Open the complete SKF 6202-2Z/C3 record →

SKF 6202/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	15.0 mm
Outside diameter	Not supplied separately	35.0 mm
Width	Not supplied separately	11.0 mm

Open the complete SKF 6202/C3 record →

SKF 6202 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	35 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	11 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 21.7 mm
Recess diameter	D 2	≈ 30.5 mm
Chamfer dimension	r 1,2	min. 0.6 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 19.2 mm
Diameter of housing abutment	D a	max. 30.8 mm
Radius of shaft or housing fillet	r a	max. 0.6 mm

Open the complete SKF 6202 record →

KOYO 6202 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	35 mm
Width	B	11 mm

Open the complete KOYO 6202 record →

KOYO 6202 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	35 mm
Width	B	11 mm

Open the complete KOYO 6202 2RS record →

TIMKEN 6202-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	35 mm / 1.378 in
Width (B)	B	11 mm / 0.433 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	0.6 mm / 0.024 in

Open the complete TIMKEN 6202-C3 record →

TIMKEN 6202-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	35 mm / 1.378 in
Width (B)	B	11 mm / 0.433 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	0.6 mm / 0.024 in

Open the complete TIMKEN 6202-2RS record →

TIMKEN 6202 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	35 mm / 1.378 in
Width (B)	B	11 mm / 0.433 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	0.6 mm / 0.024 in

Open the complete TIMKEN 6202 record →

TIMKEN 6202-2RS-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	35 mm / 1.378 in
Width (B)	B	11 mm / 0.433 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	0.6 mm / 0.024 in

Open the complete TIMKEN 6202-2RS-C3 record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6202

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6202 KOYO 6202 KOYO 6202 2RS NSK 6202 NACHI 6202 KOYO 6202 ZZ

SKF 6202 — 49 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	15.0 mm
Outside diameter	Not separately recorded	35.0 mm
Width	Not separately recorded	11.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	8.06 kN
Basic static load rating	Not separately recorded	3.75 kN
Reference speed	Not separately recorded	43000.0 r/min
Limiting speed	Not separately recorded	28000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	0.16 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.0436 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	35 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	11 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 21.7 mm
Recess diameter	D 2	≈ 30.5 mm
Chamfer dimension	r 1,2	min. 0.6 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 19.2 mm
Diameter of housing abutment	D a	max. 30.8 mm
Radius of shaft or housing fillet	r a	max. 0.6 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	8.06 kN
Basic static load rating	C 0	3.75 kN
Fatigue load limit	P u	0.16 kN
Reference speed	Not separately recorded	43000 r/min
Limiting speed	Not separately recorded	28000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	13

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	4 µm
Maximum run-out of inner ring side face to the bore	t Sd	7 µm
Maximum axial run-out of inner ring of assembled bearing	t Sia	7 µm
Range of section height at outer ring of assembled bearing	t Kea	7 µm
Perpendicularity of outer ring outside surface	t SD	4 µm
Maximum axial run-out of outer ring of assembled bearing	t Sea	8 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P5

Open SKF 6202 product record →

KOYO 6202 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

The plain KOYO 6202 record is open. For a sealed candidate, inspect the separate KOYO 6202 2RS record; for a shielded candidate, inspect KOYO 6202 ZZ. Both are listed in this page’s exact-designation references with their own parameters. The base number alone does not specify a closure.

These are distinct catalogue constructions, not a suggestion to add a loose seal to an open bearing. Seal replacement or removal requires the original assembly information; no loose-seal part number or equipment fitment is established by these records.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	15 mm
D	Not separately recorded	35 mm
B	Not separately recorded	11 mm
R(Min.)	Not separately recorded	0.6 mm
Basic Load Ratings : Cr	Not separately recorded	9.55 kN
Basic Load Ratings : C0R	Not separately recorded	3.75 kN
Fatigue Load Limit : Cu	Not separately recorded	0.290 kN
Factor : F0	Not separately recorded	13.2
Limiting Speeds(Grease Lub.)	Not separately recorded	20000 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	24000 min-1
Da(Min.)	Not separately recorded	19 mm
Da(Max.)	Not separately recorded	31 mm
Ra(Max.)	Not separately recorded	0.6 mm
Mass(Refer.)	Not separately recorded	0.045 kg

Open KOYO 6202 product record →

KOYO 6202 2RS — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Looking for a 6202 sealed bearing? KOYO 6202 2RS is a recorded catalogue candidate with contact seals on both sides. Its recorded nominal size is 15×35×11 mm, in the order bore d × outside diameter D × width B.

In JTEKT / KOYO Table 6-2, 2RS identifies contact seals on both sides. The corresponding one-sided code is RS. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6202 base record into a sealed or shielded version.

Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.

The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	15 mm
D	Not separately recorded	35 mm
B	Not separately recorded	11 mm
R(Min.)	Not separately recorded	0.6 mm
Basic Load Ratings : Cr	Not separately recorded	9.55 kN
Basic Load Ratings : C0R	Not separately recorded	3.75 kN
Fatigue Load Limit : Cu	Not separately recorded	0.290 kN
Factor : F0	Not separately recorded	13.2
Limiting Speeds(Grease Lub.)	Not separately recorded	13000 min-1
Da(Min.)	Not separately recorded	19 mm
Da(Max.)	Not separately recorded	19.5 mm
Da(Max.)	Not separately recorded	31 mm
Ra(Max.)	Not separately recorded	0.6 mm
Mass(Refer.)	Not separately recorded	0.045 kg

Open KOYO 6202 2RS product record →

NSK 6202 — 15 recorded parameters

Single row deep groove ball bearings

Reference: NSK Rolling Bearings catalogue E1103c, Part C; source snapshot 2026-10-02.

For this exact NSK 6202 record, the nominal envelope is 15×35×11 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.

Calculated inch equivalent: 0.590551×1.377953×0.433071 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.

Recorded closure for 6202: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.

Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.

Boundary dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	35 mm
Bearing width	B	11 mm
Minimum bearing chamfer	r min.	0.6 mm

Load ratings

Parameter	Source symbol	Recorded value
Basic dynamic radial load rating	Cr	8400 N
Basic static radial load rating	C0r	3750 N
Equivalent-load calculation factor	f0	13.2

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum shaft shoulder diameter	da min.	19 mm
Maximum shaft shoulder diameter	da max.	20.5 mm
Maximum housing shoulder diameter	Da max.	31 mm
Maximum shaft or housing fillet radius	ra max.	0.6 mm

Lubrication-qualified speed

Parameter	Source symbol	Recorded value
Limiting speed with grease	Not separately recorded	22000 r/min
Limiting speed with oil (open bearing)	Not separately recorded	28000 r/min

Reference mass

Parameter	Source symbol	Recorded value
Approximate catalogue mass (open reference)	Not separately recorded	0.045 kg

Construction

Parameter	Source symbol	Recorded value
Catalogue closure construction	Not separately recorded	Open

Open NSK 6202 product record →

NACHI 6202 — 15 recorded parameters

Deep groove ball bearing

Reference: NACHI Deep Groove Ball Bearings catalogue B3402E-2; source snapshot 2026-10-02.

For this exact NACHI 6202 record, the nominal envelope is 15×35×11 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.

Recorded closure for 6202: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.

Boundary dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	35 mm
Bearing width	B	11 mm
Minimum bearing chamfer	r min.	0.6 mm

Load ratings

Parameter	Source symbol	Recorded value
Basic dynamic radial load rating	Cr	9600 N
Basic static radial load rating	C0r	3700 N

Equivalent-load factors

Parameter	Source symbol	Recorded value
Catalogue load calculation factor	f0	13.1

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum shaft shoulder diameter	da min.	20 mm
Maximum housing shoulder diameter	Da max.	30 mm
Maximum adjacent fillet radius	ra max.	0.6 mm

Construction

Parameter	Source symbol	Recorded value
Closure arrangement	Not separately recorded	Open
Listed closure suffix	Not separately recorded	None (open type)

Reference mass

Parameter	Source symbol	Recorded value
Catalogue row mass (variants not individually specified)	Not separately recorded	0.045 kg

Lubrication-qualified speed

Parameter	Source symbol	Recorded value
Limiting speed with grease (open)	Not separately recorded	20000 r/min
Limiting speed with oil (open)	Not separately recorded	24000 r/min

Open NACHI 6202 product record →

KOYO 6202 ZZ — 16 recorded parameters

Deep groove ball bearing

Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.

Looking for a 6202 shielded bearing? KOYO 6202 ZZ is a recorded catalogue candidate with fixed shields on both sides. Its recorded nominal size is 15×35×11 mm, in the order bore d × outside diameter D × width B.

In JTEKT / KOYO Table 6-2, ZZ identifies fixed shields on both sides. The corresponding one-sided code is Z. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6202 base record into a sealed or shielded version.

The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.

Classification

Parameter	Source symbol	Recorded value
Official Category Path	Not separately recorded	Deep groove ball bearings - Single-row - Shielded/sealed type - Shielded ZZ
Official Classification 1	Not separately recorded	Deep groove ball bearings / Single-row / Shielded/sealed type / Shielded ZZ

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	15 mm
D	Not separately recorded	35 mm
B	Not separately recorded	11 mm
R(Min.)	Not separately recorded	0.6 mm
Basic Load Ratings : Cr	Not separately recorded	9.55 kN
Basic Load Ratings : C0R	Not separately recorded	3.75 kN
Fatigue Load Limit : Cu	Not separately recorded	0.290 kN
Factor : F0	Not separately recorded	13.2
Limiting Speeds(Grease Lub.)	Not separately recorded	20000 min-1
Da(Min.)	Not separately recorded	19 mm
Da(Max.)	Not separately recorded	19.5 mm
Da(Max.)	Not separately recorded	31 mm
Ra(Max.)	Not separately recorded	0.6 mm
Mass(Refer.)	Not separately recorded	0.045 kg

Open KOYO 6202 ZZ product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6202Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0436 kg43.6 g
TIMKEN6202Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
NSK6202Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	8.4 kN	3.75 kN	—	—	0.045 kg45 g
KOYO6202Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	9.55 kN	3.75 kN	—	20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1Limiting Speeds(Oil Lub.): 24000 min-1	0.045 kg45 g
NACHI6202Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	0.045 kg45 g
SKF6202/15.875-2RSH/GJNDeep groove ball bearing with seals	Recorded bore (d) 15.875 mm 0.625 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0437 kg43.7 g
SKF6202/16-2RSHDeep groove ball bearing with seals	Recorded bore (d) 16 mm 0.629921 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0434 kg43.4 g
SKF6202-2RS1/VM045Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	13000 rpm	0.0454 kg45.4 g
SKF6202-2RS2/C4S1VT119Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.046 kg46 g
SKF6202-2RSHDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0454 kg45.4 g
SKF6202-2RSH/C3Deep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	13000 rpm	0.046 kg46 g
SKF6202-2RSH/C3GJNDeep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	13000 rpm	0.0454 kg45.4 g
SKF6202-2RSH/C3WTDeep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	13000 rpm	0.0454 kg45.4 g
SKF6202-2RSH/C4Deep groove ball bearings	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.0454 kg45.4 g
SKF6202-2RSH/GJNDeep groove ball bearing	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.0454 kg45.4 g
SKF6202-2RSHNRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0475 kg47.5 g
SKF6202-2RSH/VA947SKF Food line deep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0461 kg46.1 g
SKF6202-2RSH/W64Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	9600 rpm	0.0482 kg48.2 g
SKF6202 2RSJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0454 kg45.4 g
SKF6202-2RSLDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0454 kg45.4 g
SKF6202-2RSL/C3Deep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	—	0.0454 kg45.4 g
SKF6202-2RSLTN9/C3VT162Deep groove ball bearings	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.0438 kg43.8 g
SKF6202-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.8 kN	3.75 kN	50000 rpm	24000 rpm	0.0396 kg39.6 g
SKF6202 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0475 kg47.5 g
SKF6202-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0465 kg46.5 g
SKF6202-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0465 kg46.5 g
SKF6202-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0465 kg46.5 g
SKF6202-2Z/C3WTDeep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0465 kg46.5 g
SKF6202 2ZJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0465 kg46.5 g
SKF6202-2Z/LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0465 kg46.5 g
SKF6202-2ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0473 kg47.3 g
SKF6202 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	22000 rpm	0.0473 kg47.3 g
SKF6202-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	—	3.75 kN	—	180 rpm	0.045 kg45 g
SKF6202-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	—	3.75 kN	—	360 rpm	0.0465 kg46.5 g
SKF6202/C2Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0423 kg42.3 g
SKF6202/C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.045 kg45 g
SKF6202/C4Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0423 kg42.3 g
SKF6202/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.8 kN	3.75 kN	50000 rpm	32000 rpm	0.0423 kg42.3 g
SKF6202 JEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0423 kg42.3 g
SKF6202 NRDeep groove ball bearing with snap ring	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.047 kg47 g
SKF6202 NRJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0444 kg44.4 g
SKF6202-RSHDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0436 kg43.6 g
SKF6202 RSJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	—	13000 rpm	0.0436 kg43.6 g
SKF6202 TN9/C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0407 kg40.7 g
SKF6202/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	—	3.75 kN	—	180 rpm	0.045 kg45 g
SKF6202/VK2415Deep groove ball bearing with snap ring groove and integral sealing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0423 kg42.3 g
SKF6202-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0457 kg45.7 g
SKF6202-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0435 kg43.5 g
SKF6202 ZJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0435 kg43.5 g
SKF6202-ZTN9Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.043 kg43 g
SKF6202-ZTN9/LTDeep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	8.06 kN	3.75 kN	43000 rpm	28000 rpm	0.0438 kg43.8 g
FAG6202-C-2BRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2BRS-L038-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2BRS-L091-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2BRS-L138-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2BRS-TVH-L178-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.043 kg43 g
FAG6202-C-2BRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-C4>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.043 kg43 g
FAG6202-C-2HRS-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.043 kg43 g
FAG6202-C-2HRS-L069-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-L069>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-L100-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-L138-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-L138-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS-L138>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.044 kg44 g
FAG6202-C-2Z-C2>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L069-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L069-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L069>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.042 kg42 g
FAG6202-C-2Z-L100-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.043 kg43 g
FAG6202-C-2Z-L138-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L138-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L138>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L207-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-L506-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-2Z-N-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.043 kg43 g
FAG6202-C-2Z-N>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.043 kg43 g
FAG6202-C-2Z>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	28000 rpm	0.044 kg44 g
FAG6202-C-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.041 kg41 g
FAG6202-C-C4>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.041 kg41 g
FAG6202-C-H305>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.045 kg45 g
FAG6202-C-HRS-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.042 kg42 g
FAG6202-C-HRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	—	19400 rpm	0.042 kg42 g
FAG6202-C-TVH-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.04 kg40 g
FAG6202-C-TVH-C4>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.04 kg40 g
FAG6202-C>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.041 kg41 g
FAG6202-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.043 kg43 g
FAG6202-C-Z-TVH-C2>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.041 kg41 g
FAG6202-C-Z-TVH>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.041 kg41 g
FAG6202-C-Z>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	8.9 kN	3.75 kN	21900 rpm	33000 rpm	0.043 kg43 g
FAG6202-H-2RSR-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	12400 rpm	0.045 kg45 g
FAG6202-H-2RSR>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	12400 rpm	0.045 kg45 g
FAG6202-H-2Z-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.64 kN	3.72 kN	19500 rpm	25500 rpm	0.045 kg45 g
FAG6202-H-2Z>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.64 kN	3.72 kN	19500 rpm	25500 rpm	0.045 kg45 g
FAG6202-H-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.64 kN	3.72 kN	19500 rpm	29500 rpm	0.042 kg42 g
FAG6202-H>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	7.64 kN	3.72 kN	19500 rpm	29500 rpm	0.042 kg42 g
TIMKEN6202-2RSDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RS-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RS-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RS-NR-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RZ-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-2RZ-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202HDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	6.11 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202H/FVSL527Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	6.11 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202H/FVSL613Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	6.11 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-RSDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-RS-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202TN1-ZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-ZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-Z-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-Z-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-ZZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-ZZ-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
TIMKEN6202-ZZ-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 35 mm 1.377953 in Catalogue width (symbol unverified) 11 mm 0.433071 in	7.64 kN	3.72 kN	—	—	0.05 kg50 g
NSK6202DDUDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	8.4 kN	3.75 kN	—	—	—
NSK6202VVDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	8.4 kN	3.75 kN	—	—	—
NSK6202ZZDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	8.4 kN	3.75 kN	—	—	—
KOYO6202/1B2RMXCS11-AMAutomotive bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 13 mm 0.511811 in	—	—	—	—	0.049 kg49 g
KOYO6202 2RDDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	9.55 kN	3.75 kN	—	18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1	0.045 kg45 g
KOYO6202 2RSDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	9.55 kN	3.75 kN	—	13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1	0.045 kg45 g
KOYO6202 2RUDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	9.55 kN	3.75 kN	—	20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1	0.045 kg45 g
KOYO6202NRDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	9.55 kN	3.75 kN	—	20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1Limiting Speeds(Oil Lub.): 24000 min-1	0.045 kg45 g
KOYO6202 ZZDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Width (B) 11 mm 0.433071 in	9.55 kN	3.75 kN	—	20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1	0.045 kg45 g
NACHI6202-2NKE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	—
NACHI6202-2NSE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	—
NACHI6202NKE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	—
NACHI6202NSE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	—
NACHI6202ZEDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	—
NACHI6202ZZEDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 35 mm 1.377953 in Bearing width (B) 11 mm 0.433071 in	9.6 kN	3.7 kN	—	—	—
NTN6202LUDeep groove ball bearing	Internal diameter (d) 15 mm 0.590551 in External diameter (D) 35 mm 1.377953 in Bearing/Inner ring width (B) 11 mm 0.433071 in	8.6 kN	3.6 kN	—	—	0.045 kg45 g
NTN6202ZDeep groove ball bearing	Internal diameter (d) 15 mm 0.590551 in External diameter (D) 35 mm 1.377953 in Bearing/Inner ring width (B) 11 mm 0.433071 in	8.6 kN	3.6 kN	—	—	0.045 kg45 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6202	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
TIMKEN 6202	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6202	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6202/15.875-2RSH/GJN	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6202/16-2RSH	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2RS1/VM045	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2RS2/C4S1VT119	Seal on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6202-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2RSH/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2RSH/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2RSH/C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2RSH/C4	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6202-2RSH/GJN	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6202-2RSHNR	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2RSH/VA947	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Food grade grease
SKF 6202-2RSH/W64	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Solid Oil
SKF 6202 2RSJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2RSL	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2RSL/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2RSLTN9/C3VT162	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6202-2RSLTN9/HC5C3WT	Seal on both sides	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	Grease
SKF 6202 2RSNRJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2Z/C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202 2ZJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2Z/LHT23	Shield on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6202-2ZNR	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6202 2ZNRJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6202-2Z/VA201	Shield on both sides	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6202-2Z/VA228	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6202/C2	Without	Not recorded	C2	Sheet metal	Bearing steel	None
SKF 6202/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6202/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6202/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6202 JEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6202 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6202 NRJEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6202-RSH	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6202 RSJEM	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6202 TN9/C3	Without	Not recorded	C3	Non-metallic	Bearing steel	None
SKF 6202/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6202/VK2415	Seal on one side	Not recorded	C3	Non-metallic	Bearing steel	Grease
SKF 6202-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6202-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6202 ZJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6202-ZTN9	Shield on one side	Not recorded	CN	Non-metallic	Bearing steel	Grease
SKF 6202-ZTN9/LT	Shield on one side	Not recorded	CN	Non-metallic	Bearing steel	Grease
FAG 6202-C-2BRS-L038-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2BRS-L038-CM>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2BRS-L091-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L091 — Grease (L091/customer specific)
FAG 6202-C-2BRS-L138-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2BRS-TVH-L178-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	L178 — Grease (L178/customer specific)
FAG 6202-C-2BRS>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2HRS-C4>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2HRS-L038-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2HRS-L038>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2HRS-L069-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6202-C-2HRS-L069>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6202-C-2HRS-L100-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6202-C-2HRS-L138-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2HRS-L138-CM>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2HRS-L138>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2Z-C2>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2Z-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2Z-L038-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2Z-L038>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2Z-L069-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6202-C-2Z-L069-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6202-C-2Z-L069>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6202-C-2Z-L100-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6202-C-2Z-L138-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2Z-L138-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2Z-L138>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6202-C-2Z-L207-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6202-C-2Z-L506-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L506 — Grease (L506/customer specific)
FAG 6202-C-2Z-N-L038>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6202-C-2Z-N>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6202-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-H305>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-HRS-C3>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-HRS>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-TVH-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6202-C-TVH-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6202-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-C-Z-TVH-C2>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6202-C-Z-TVH>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6202-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-H-2RSR-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6202-H-2RSR>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6202-H-2Z-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6202-H-2Z>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6202-H-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6202-H>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6202-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RS-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RS-NR-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-2RZ-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202H	Open	Not recorded	Not recorded	Stainless Steel cage	Not recorded	Not recorded
TIMKEN 6202H/FVSL527	Open	Not recorded	Not recorded	Stainless Steel cage	Not recorded	Not recorded
TIMKEN 6202H/FVSL613	Open	Not recorded	Not recorded	Stainless Steel cage	Not recorded	Not recorded
TIMKEN 6202-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202TN1-Z	Shielded	Not recorded	Not recorded	Nylon cage	Not recorded	Not recorded
TIMKEN 6202/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6202-ZZ-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6202DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6202VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6202ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202/1B2RMXCS11-AM	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6202 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202-2NKE9	Two non-contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202-2NSE9	Two contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202NKE9	One non-contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202NSE9	One contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202ZE	One shield	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6202ZZE	Two shields	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NTN 6202LU	contact seal on one side	Not recorded	CN	pressed steel cage	Not recorded	Not recorded
NTN 6202Z	shield on one side	Not recorded	CN	pressed steel cage	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →KOYO

62022RDDC3

Automotive bearing

View full technical record →

Filter all 146 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6202 — published size and closure variants

Keep RS, 2RS, ZZ and width suffixes distinct

6202 — PEER catalogue dimensions

Read ratings without transferring them to another execution

6202 — source-labelled NSK dimensions

6202 dimensions and recorded technical data

Read the original dimensions for 6202

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6202

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Technical Data

Technical Data

Boundary dimensions

Load ratings

Mounting dimensions

Lubrication-qualified speed

Reference mass

Construction

Boundary dimensions

Load ratings

Equivalent-load factors

Mounting dimensions

Construction

Reference mass

Lubrication-qualified speed

Classification

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6202

6202

6202

6202

6202

6202/15.875-2RSH/GJN

6202/16-2RSH

6202/1B2RMXCS11-AM

6202-2NKE9

6202-2NSE9

6202 2RD

62022RDDC3

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.