Find · understand · compare
6201 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6201. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page8 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6201 — published size and closure variants
6201 is the base grouping for the specific records below. Read the complete designation and publisher on each row. The source unit is retained beside the converted unit. A shield or seal can change the width; equal bore and outside diameter do not establish the same envelope.
3 source-labelled records; 3 shown initially.
| Publisher / full model | Closure / material | d×D×B in mm | d×D×B in inches | Source unit |
|---|---|---|---|---|
| SMB6201 | OpenChrome steel | 12× | 0.472441× | mm |
| SMB6201ZZ | ShieldedChrome steel | 12× | 0.472441× | mm |
| SMB6201-2RS | SealedChrome steel | 12× | 0.472441× | mm |
Page 1
Keep RS, 2RS, ZZ and width suffixes distinct
The table records the publisher’s open, shielded or sealed column. An unlisted “RS” marking is not rewritten as “2RS”. Keep special endings such as W21, W23 or a fractional bore suffix: they can identify a different width or bore. No automatic cross-brand substitution is approved.
Metric values converted from printed inch decimals inherit the source rounding. For example, 0.2812 in converts to 7.14248 mm; that extra decimal detail is arithmetic, not a tolerance or a machining target. Never silently round an inch bearing into the nearest metric size. Missing speed, clearance, precision, internal ball diameter, material grade or exact lubricant remain unknown.
Publisher references: SMB product charts and Enduro 1600-series data; checked 2026-10-02. Original BearingScope interpretation. No stock, sales, vehicle fitment or redistributable CAD is implied. Material names describe the source page, not a certificate for every item sold under a similar number.
6201 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6201 | 12× | .4724× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6201 | 6800 / 3050 N | 26000 / 22000 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6201 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6201 | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201DDU | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201DDUNR | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201DU | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201N | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201NR | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201VV | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201Z | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201ZNR | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201ZZ | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6201ZZNR | 12 mm | 32 mm | 10 mm | Printed p. 31Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6201 dimensions and recorded technical data
The recorded 6201 base designation measures 12×32×10 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 125 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6201
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6201/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 12.0 mm |
| Outside diameter | Not supplied separately | 32.0 mm |
| Width | Not supplied separately | 10.0 mm |
SKF 6201 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.007 to 0 mm |
| Outside diameter | D | 32 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.009 to 0 mm |
| Width | B | 10 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 18.45 mm |
| Recess diameter | D 2 | ≈ 27.34 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 16.2 mm |
| Diameter of housing abutment | D a | max. 27.8 mm |
| Radius of shaft or housing fillet | r a | max. 0.6 mm |
KOYO 6201 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Outside diameter | D | 32 mm |
| Width | B | 10 mm |
KOYO 6201 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Outside diameter | D | 32 mm |
| Width | B | 10 mm |
TIMKEN 6201 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 12 mm |
| O.D. (D) | D | 32 mm / 1.260 in |
| Width (B) | B | 10 mm / 0.394 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
TIMKEN 6201-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 12 mm |
| O.D. (D) | D | 32 mm / 1.260 in |
| Width (B) | B | 10 mm / 0.394 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
TIMKEN 6201-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 12 mm |
| O.D. (D) | D | 32 mm / 1.260 in |
| Width (B) | B | 10 mm / 0.394 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
Catalogue parameters for 6201
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6201 — 49 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 12.0 mm |
| Outside diameter | Not separately recorded | 32.0 mm |
| Width | Not separately recorded | 10.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 7.28 kN |
| Basic static load rating | Not separately recorded | 3.1 kN |
| Reference speed | Not separately recorded | 50000.0 r/min |
| Limiting speed | Not separately recorded | 32000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.13 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.0354 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.007 to 0 mm |
| Outside diameter | D | 32 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.009 to 0 mm |
| Width | B | 10 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 18.45 mm |
| Recess diameter | D 2 | ≈ 27.34 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 16.2 mm |
| Diameter of housing abutment | D a | max. 27.8 mm |
| Radius of shaft or housing fillet | r a | max. 0.6 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 7.28 kN |
| Basic static load rating | C 0 | 3.1 kN |
| Fatigue load limit | P u | 0.132 kN |
| Reference speed | Not separately recorded | 50000 r/min |
| Limiting speed | Not separately recorded | 32000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 12 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 4 µm |
| Maximum run-out of inner ring side face to the bore | t Sd | 7 µm |
| Maximum axial run-out of inner ring of assembled bearing | t Sia | 7 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 7 µm |
| Perpendicularity of outer ring outside surface | t SD | 4 µm |
| Maximum axial run-out of outer ring of assembled bearing | t Sea | 8 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P5 |
KOYO 6201 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 12 mm |
| D | Not separately recorded | 32 mm |
| B | Not separately recorded | 10 mm |
| R(Min.) | Not separately recorded | 0.6 mm |
| Basic Load Ratings : Cr | Not separately recorded | 8.50 kN |
| Basic Load Ratings : C0R | Not separately recorded | 3.05 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.240 kN |
| Factor : F0 | Not separately recorded | 12.3 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 22000 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 27000 min-1 |
| Da(Min.) | Not separately recorded | 16 mm |
| Da(Max.) | Not separately recorded | 28 mm |
| Ra(Max.) | Not separately recorded | 0.6 mm |
| Mass(Refer.) | Not separately recorded | 0.037 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6201Deep groove ball bearing |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0354 kg35.4 g |
| TIMKEN6201Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| NSK6201Deep groove ball bearing |
| 7.5 kN | 3.05 kN | — | — | 0.037 kg37 g |
| KOYO6201Deep groove ball bearing |
| 8.5 kN | 3.05 kN | — | 22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1Limiting Speeds(Oil Lub.): 27000 min-1 | 0.037 kg37 g |
| NACHI6201Deep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | 0.037 kg37 g |
| SKF6201-2RS2/C3LHT23Deep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0375 kg37.5 g |
| SKF6201-2RSHDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.0365 kg36.5 g |
| SKF6201-2RSH/C3Deep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | 50000 rpm | 15000 rpm | 0.0365 kg36.5 g |
| SKF6201-2RSH/C3GJNDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.03 kg30 g |
| SKF6201-2RSH/C3LHT23Deep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | 50000 rpm | 15000 rpm | 0.0365 kg36.5 g |
| SKF6201-2RSH/C4Deep groove ball bearing |
| — | — | — | — | 0.0365 kg36.5 g |
| SKF6201-2RSH/GJNDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.0375 kg37.5 g |
| SKF6201-2RSHNR/C3GJNDeep groove ball bearing |
| — | — | — | — | 0.0374 kg37.4 g |
| SKF6201-2RSH/VA947SKF Food line deep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.038 kg38 g |
| SKF6201-2RSH/W64Deep groove ball bearing |
| 7.28 kN | 3.1 kN | — | 10800 rpm | 0.0365 kg36.5 g |
| SKF6201 2RSJEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.0375 kg37.5 g |
| SKF6201-2RSLDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0365 kg36.5 g |
| SKF6201-2RSL/C3GJNDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0365 kg36.5 g |
| SKF6201-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides |
| 6.89 kN | 3.1 kN | 60000 rpm | 28000 rpm | 0.033 kg33 g |
| SKF6201 2RSNRJEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.0386 kg38.6 g |
| SKF6201-2ZDeep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201-2Z/C2ELHT23Deep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201-2Z/C3Deep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201-2Z/C3LHT23Deep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201 2ZJEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201-2Z/LHT23Deep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0375 kg37.5 g |
| SKF6201-2ZNRDeep groove ball bearing with snap ring and integral sealing |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0395 kg39.5 g |
| SKF6201 2ZNRJEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 50000 rpm | 26000 rpm | 0.0395 kg39.5 g |
| SKF6201-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 3.1 kN | — | 200 rpm | 0.0375 kg37.5 g |
| SKF6201-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 3.1 kN | — | 410 rpm | 0.0375 kg37.5 g |
| SKF6201/C3Deep groove ball bearing |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0349 kg34.9 g |
| SKF6201 JEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0349 kg34.9 g |
| SKF6201 NRDeep groove ball bearing with snap ring |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0369 kg36.9 g |
| SKF6201-RSHDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.0354 kg35.4 g |
| SKF6201 RSJEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | — | 15000 rpm | 0.0363 kg36.3 g |
| SKF6201-RSLDeep groove ball bearing with seals |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0354 kg35.4 g |
| SKF6201 TN9/C3Deep groove ball bearings |
| — | — | — | — | 0.0343 kg34.3 g |
| SKF6201/VA201Deep groove ball bearing for high temperature applications |
| — | 3.1 kN | — | 200 rpm | 0.0288 kg28.8 g |
| SKF6201-ZDeep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0363 kg36.3 g |
| SKF6201-Z/C3Deep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0363 kg36.3 g |
| SKF6201 ZJEMDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0363 kg36.3 g |
| SKF6201-ZTN9/LTDeep groove ball bearing with seals or shields |
| 7.28 kN | 3.1 kN | 50000 rpm | 32000 rpm | 0.0353 kg35.3 g |
| FAG6201-C-2BRS-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2BRS-L138-C2>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2BRS-TVH-L069-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.035 kg35 g |
| FAG6201-C-2BRS>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2ELS-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-C4>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-L038-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.04 kg40 g |
| FAG6201-C-2HRS-L038>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.04 kg40 g |
| FAG6201-C-2HRS-L069-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-L069>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-L138-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-L138-CM>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-L138>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-L207-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2HRS-NR-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.037 kg37 g |
| FAG6201-C-2HRS>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-C2>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L038-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.04 kg40 g |
| FAG6201-C-2Z-L038>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.037 kg37 g |
| FAG6201-C-2Z-L069-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L069-CM>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L138-C2>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L138-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L138-CM>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L138>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L207-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L207>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z-L506-CM>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-2Z>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 31500 rpm | 0.036 kg36 g |
| FAG6201-C-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.033 kg33 g |
| FAG6201-C-C4>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.033 kg33 g |
| FAG6201-C-H305-TVH>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.036 kg36 g |
| FAG6201-C-H305>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.035 kg35 g |
| FAG6201-C-HRS-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.035 kg35 g |
| FAG6201-C-HRS>VDeep groove ball bearing |
| 8 kN | 3.1 kN | — | 22500 rpm | 0.034 kg34 g |
| FAG6201-C-TVH-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.032 kg32 g |
| FAG6201-C>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.033 kg33 g |
| FAG6201-C-Z-C3>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.034 kg34 g |
| FAG6201-C-Z-TVH>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.033 kg33 g |
| FAG6201-C-Z>VDeep groove ball bearing |
| 8 kN | 3.1 kN | 24600 rpm | 37000 rpm | 0.034 kg34 g |
| FAG6201-H-2RSR-C3>NDeep groove ball bearing |
| 7.28 kN | 3.1 kN | — | 14600 rpm | 0.039 kg39 g |
| FAG6201-H-2RSR>NDeep groove ball bearing |
| 7.28 kN | 3.1 kN | — | 14600 rpm | 0.039 kg39 g |
| FAG6201-H-2Z-C3>NDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 21900 rpm | 28500 rpm | 0.039 kg39 g |
| FAG6201-H-2Z>NDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 21900 rpm | 28500 rpm | 0.035 kg35 g |
| FAG6201-H-C3>NDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 21900 rpm | 33500 rpm | 0.037 kg37 g |
| FAG6201-H>NDeep groove ball bearing |
| 7.28 kN | 3.1 kN | 21900 rpm | 33500 rpm | 0.037 kg37 g |
| TIMKEN6201-2RSDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RS-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RS-NRDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RS-NR-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RS/VSL609Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RZDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RZ-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-2RZ-NRDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-RSDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-RS-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201/VSL609Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-ZDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-Z-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-Z-NRDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-ZZDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-ZZ-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-ZZ-NRDeep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| TIMKEN6201-ZZ-NR-C3Deep groove ball bearing |
| 6.82 kN | 3.06 kN | — | — | 0.04 kg40 g |
| NSK6201DDUDeep groove ball bearing |
| 7.5 kN | 3.05 kN | — | — | — |
| NSK6201VVDeep groove ball bearing |
| 7.5 kN | 3.05 kN | — | — | — |
| NSK6201ZZDeep groove ball bearing |
| 7.5 kN | 3.05 kN | — | — | — |
| KOYO6201 2RDDeep groove ball bearing |
| 8.5 kN | 3.05 kN | — | 20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1 | 0.037 kg37 g |
| KOYO6201 2RSDeep groove ball bearing |
| 8.5 kN | 3.05 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1 | 0.037 kg37 g |
| KOYO6201 2RUDeep groove ball bearing |
| 8.5 kN | 3.05 kN | — | 22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1 | 0.037 kg37 g |
| KOYO6201NRDeep groove ball bearing |
| 8.5 kN | 3.05 kN | — | 22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1Limiting Speeds(Oil Lub.): 27000 min-1 | 0.037 kg37 g |
| KOYO6201 ZZDeep groove ball bearing |
| 8.5 kN | 3.05 kN | — | 22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1 | 0.037 kg37 g |
| NACHI6201-2NKE9Deep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | — |
| NACHI6201-2NSE9Deep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | — |
| NACHI6201NKE9Deep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | — |
| NACHI6201NSE9Deep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | — |
| NACHI6201ZEDeep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | — |
| NACHI6201ZZEDeep groove ball bearing |
| 8.55 kN | 3.05 kN | — | — | — |
| NTN6201LUDeep groove ball bearing |
| 6.75 kN | 2.75 kN | — | — | 0.037 kg37 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6201 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6201 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6201 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6201 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6201-2RS2/C3LHT23 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSH | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSH/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSH/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSH/C3LHT23 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSH/C4 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6201-2RSH/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSHNR/C3GJN | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6201-2RSH/VA947 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Food grade grease |
| SKF 6201-2RSH/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6201 2RSJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSL | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSL/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2RSLTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6201 2RSNRJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z/C2ELHT23 | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z/C3LHT23 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z/LHT23 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6201-2ZNR | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6201 2ZNRJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6201-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6201-2Z/VA228 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6201/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6201 JEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6201 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6201-RSH | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6201 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6201-RSL | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6201 TN9/C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6201/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6201-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6201-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6201 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6201-ZTN9/LT | Shield on one side | Not recorded | CN | Non-metallic | Bearing steel | Grease |
| FAG 6201-C-2BRS-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2BRS-L138-C2>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2BRS-TVH-L069-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6201-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2ELS-C3>V | 2ELS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2HRS-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6201-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6201-C-2HRS-L069-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6201-C-2HRS-L069>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6201-C-2HRS-L138-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2HRS-L138-CM>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2HRS-L138>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2HRS-L207-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6201-C-2HRS-NR-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2Z-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6201-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6201-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6201-C-2Z-L069-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6201-C-2Z-L138-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2Z-L138-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2Z-L138-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2Z-L138>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6201-C-2Z-L207-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6201-C-2Z-L207>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6201-C-2Z-L506-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L506 — Grease (L506/customer specific) |
| FAG 6201-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6201-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-C4>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-H305-TVH>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6201-C-H305>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-TVH-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6201-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-C-Z-TVH>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6201-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6201-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6201-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6201-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6201-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6201-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6201-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6201-ZZ-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6201DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6201VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6201ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6201 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6201 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6201 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6201NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6201 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6201ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NTN 6201LU | contact seal on one side | Not recorded | CN | pressed steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6201
Deep groove ball bearing
View full technical record →TIMKEN6201
Deep groove ball bearing
View full technical record →KOYO6201
Deep groove ball bearing
View full technical record →NSK6201
Deep groove ball bearing
View full technical record →NACHI6201
Deep groove ball bearing
View full technical record →NACHI6201-2NKE9
Deep groove ball bearing
View full technical record →NACHI6201-2NSE9
Deep groove ball bearing
View full technical record →KOYO6201 2RD
Deep groove ball bearing
View full technical record →TIMKEN6201-2RS
Deep groove ball bearing
View full technical record →KOYO6201 2RS
Deep groove ball bearing
View full technical record →SKF6201-2RS2/C3LHT23
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6201-2RS-C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.