Find · understand · compare

607 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 607. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page7 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Catalogue variant evidence

607 — published size and closure variants

607 is the base grouping for the specific records below. Read the complete designation and publisher on each row. The source unit is retained beside the converted unit. A shield or seal can change the width; equal bore and outside diameter do not establish the same envelope.

3 source-labelled records; 3 shown initially.

Publisher / full model	Closure / material	d×D×B in mm	d×D×B in inches	Source unit
SMB607	OpenChrome steel	7×19×6 mm	0.275591×0.748031×0.23622 in	mm
SMB607ZZ	ShieldedChrome steel	7×19×6 mm	0.275591×0.748031×0.23622 in	mm
SMB607-2RS	SealedChrome steel	7×19×6 mm	0.275591×0.748031×0.23622 in	mm

Page 1

Keep RS, 2RS, ZZ and width suffixes distinct

The table records the publisher’s open, shielded or sealed column. An unlisted “RS” marking is not rewritten as “2RS”. Keep special endings such as W21, W23 or a fractional bore suffix: they can identify a different width or bore. No automatic cross-brand substitution is approved.

Metric values converted from printed inch decimals inherit the source rounding. For example, 0.2812 in converts to 7.14248 mm; that extra decimal detail is arithmetic, not a tolerance or a machining target. Never silently round an inch bearing into the nearest metric size. Missing speed, clearance, precision, internal ball diameter, material grade or exact lubricant remain unknown.

Publisher references: SMB product charts and Enduro 1600-series data; checked 2026-10-02. Original BearingScope interpretation. No stock, sales, vehicle fitment or redistributable CAD is implied. Material names describe the source page, not a certificate for every item sold under a similar number.

Metric and inch variant directory Main catalogue dimension finder Exact unit conversion Closure-selection guide

Source-labelled catalogue reference

607 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 600 series607	7×19×6 mmPrinted metric row	.2756×.7480×.2362 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
607	2246 / 912 N	40000 / 34000 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

Exact model evidence

607 dimensions and recorded technical data

The recorded 607 base designation measures 7×19×6 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NTN, EZO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 30 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF607Deep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	53000 rpm	0.0073 kg7.3 g
NSK607Deep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Bearing width (open) (B) 6 mm 0.23622 in	2.57 kN	0.885 kN	—	—	0.00767 kg7.67 g
KOYO607Deep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.95 kN	0.89 kN	—	40000 rpmLimiting Speeds(Grease Lub.): 40000 min-1Limiting Speeds(Oil Lub.): 47000 min-1	0.007 kg7 g
NTN607Deep groove ball bearing	Internal diameter (d) 7 mm 0.275591 in External diameter (D) 19 mm 0.748031 in Bearing/Inner ring width (B) 6 mm 0.23622 in	2.48 kN	0.91 kN	—	—	0.008 kg8 g
EZO607Deep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outer diameter (D) 19 mm 0.748031 in Inner ring width (B) 6 mm 0.23622 in	2.34 kN	0.889 kN	—	—	0.00676 kg6.76 g
SKF607-2RSHDeep groove ball bearing with seals	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.34 kN	0.95 kN	—	24000 rpm	0.0076 kg7.6 g
SKF607-2RSH/C3Deep groove ball bearing with seals	Recorded bore (d) 7 mm 0.275591 in Recorded outside dimension (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	24000 rpm	0.0076 kg7.6 g
SKF607-2RSH/LHT23Deep groove ball bearing with seals	Recorded bore (d) 7 mm 0.275591 in Recorded outside dimension (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	24000 rpm	0.0076 kg7.6 g
SKF607-2RSLDeep groove ball bearing with seals	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	43000 rpm	0.0076 kg7.6 g
SKF607-2RSLTN9/C3LTDeep groove ball bearing with seals	Recorded bore (d) 7 mm 0.275591 in Recorded outside dimension (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	43000 rpm	0.0072 kg7.2 g
SKF607-2RSLTN9/HC5C3WTF1Hybrid ceramic deep groove ball bearing with low-friction seals on both sides	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.21 kN	0.95 kN	90000 rpm	43000 rpm	0.007 kg7 g
SKF607-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	43000 rpm	0.008 kg8 g
SKF607-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 7 mm 0.275591 in Recorded outside dimension (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	43000 rpm	0.008 kg8 g
SKF607-2Z/LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 7 mm 0.275591 in Recorded outside dimension (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	43000 rpm	0.008 kg8 g
SKF607-RSHDeep groove ball bearing with seals	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.34 kN	0.95 kN	—	24000 rpm	0.0073 kg7.3 g
SKF607-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.34 kN	0.95 kN	85000 rpm	53000 rpm	0.0076 kg7.6 g
FAG607-2RSR-C3-HLNDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.8 kN	1.06 kN	—	25500 rpm	0.007 kg7 g
FAG607-2RSR-HLNDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.8 kN	1.06 kN	—	25500 rpm	0.007 kg7 g
FAG607-2RSR-L091-C3>NDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.8 kN	1.06 kN	—	25500 rpm	0.008 kg8 g
FAG607-2Z-HLNDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.8 kN	1.06 kN	34500 rpm	44500 rpm	0.007 kg7 g
FAG607-2Z-HLN-C3Deep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.8 kN	1.06 kN	34500 rpm	44500 rpm	0.007 kg7 g
FAG607-2Z-L069-HLNDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.8 kN	1.06 kN	34500 rpm	44500 rpm	0.008 kg8 g
NSK607DDDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.57 kN	0.885 kN	—	—	—
NSK607VVDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.57 kN	0.885 kN	—	—	—
NSK607ZZ1Deep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Catalogue width (symbol unverified) 6 mm 0.23622 in	2.57 kN	0.885 kN	—	—	0.00751 kg7.51 g
KOYO607 2RDDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.95 kN	0.89 kN	—	36000 rpmLimiting Speeds(Grease Lub.): 36000 min-1Limiting Speeds(Oil Lub.): - min-1	0.007 kg7 g
KOYO607 2RSDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.95 kN	0.89 kN	—	27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1Limiting Speeds(Oil Lub.): - min-1	0.007 kg7 g
KOYO607 2RUDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.95 kN	0.89 kN	—	40000 rpmLimiting Speeds(Grease Lub.): 40000 min-1Limiting Speeds(Oil Lub.): - min-1	0.007 kg7 g
KOYO607 ZZDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outside diameter (D) 19 mm 0.748031 in Width (B) 6 mm 0.23622 in	2.95 kN	0.89 kN	—	40000 rpmLimiting Speeds(Grease Lub.): 40000 min-1Limiting Speeds(Oil Lub.): - min-1	0.007 kg7 g
EZO607 2RSDeep groove ball bearing	Bore diameter (d) 7 mm 0.275591 in Outer diameter (D) 19 mm 0.748031 in Inner ring width (B) 6 mm 0.23622 in	2.34 kN	0.889 kN	—	—	0.00718 kg7.18 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 607	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
NSK 607	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 607	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NTN 607	open	Not recorded	CN	pressed steel cage	Not recorded	Not recorded
EZO 607	Open (no closure suffix in this catalogue marking)	Not recorded	Not recorded	Not recorded	High-carbon chromium bearing steel	Not recorded
SKF 607-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 607-2RSH/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 607-2RSH/LHT23	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 607-2RSL	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 607-2RSLTN9/C3LT	Seal on both sides	Not recorded	C3	Non-metallic	Bearing steel	Grease
SKF 607-2RSLTN9/HC5C3WTF1	Seal on both sides	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	Grease
SKF 607-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 607-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 607-2Z/LHT23	Shield on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 607-RSH	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 607-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 607-2RSR-C3-HLN	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 607-2RSR-HLN	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 607-2RSR-L091-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L091 — Grease (L091/customer specific)
FAG 607-2Z-HLN	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 607-2Z-HLN-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 607-2Z-L069-HLN	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
NSK 607DD	Contact rubber seals on both sides (DD)	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 607VV	Non-contact rubber seals on both sides (VV)	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 607ZZ1	Metal shields on both sides (ZZ1)	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 607 2RD	Extremely light contact sealed 2RD	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 607 2RS	Contact sealed 2RS	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 607 2RU	Non-contact sealed 2RU	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 607 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
EZO 607 2RS	Two contact rubber seals	Not recorded	Not recorded	Not recorded	High-carbon chromium bearing steel	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →FAG

6072-M-C4

Deep groove ball bearing

View full technical record →

Filter all 43 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

607 — published size and closure variants

Keep RS, 2RS, ZZ and width suffixes distinct

607 — PEER catalogue dimensions

Read ratings without transferring them to another execution

607 dimensions and recorded technical data

How to compare these values

Related prefix matches — other model numbers may appear

607

607

607

607

607

60/710

60/710-MA-C3

6072

6072 M

6072-M

6072-M-C3

6072-M-C4

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.