Find · understand · compare

6002 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6002. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page6 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Catalogue variant evidence

6002 — published size and closure variants

6002 is the base grouping for the specific records below. Read the complete designation and publisher on each row. The source unit is retained beside the converted unit. A shield or seal can change the width; equal bore and outside diameter do not establish the same envelope.

3 source-labelled records; 3 shown initially.

Publisher / full model	Closure / material	d×D×B in mm	d×D×B in inches	Source unit
SMB6002	OpenChrome steel	15×32×9 mm	0.590551×1.259843×0.354331 in	mm
SMB6002ZZ	ShieldedChrome steel	15×32×9 mm	0.590551×1.259843×0.354331 in	mm
SMB6002-2RS	SealedChrome steel	15×32×9 mm	0.590551×1.259843×0.354331 in	mm

Page 1

Keep RS, 2RS, ZZ and width suffixes distinct

The table records the publisher’s open, shielded or sealed column. An unlisted “RS” marking is not rewritten as “2RS”. Keep special endings such as W21, W23 or a fractional bore suffix: they can identify a different width or bore. No automatic cross-brand substitution is approved.

Metric values converted from printed inch decimals inherit the source rounding. For example, 0.2812 in converts to 7.14248 mm; that extra decimal detail is arithmetic, not a tolerance or a machining target. Never silently round an inch bearing into the nearest metric size. Missing speed, clearance, precision, internal ball diameter, material grade or exact lubricant remain unknown.

Publisher references: SMB product charts and Enduro 1600-series data; checked 2026-10-02. Original BearingScope interpretation. No stock, sales, vehicle fitment or redistributable CAD is implied. Material names describe the source page, not a certificate for every item sold under a similar number.

Metric and inch variant directory Main catalogue dimension finder Exact unit conversion Closure-selection guide

Exact model evidence

6002 dimensions and recorded technical data

The recorded 6002 base designation measures 15×32×9 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 97 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6002

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6002 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	32 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	9 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 20.5 mm
Recess diameter	D 2	≈ 28.2 mm
Chamfer dimension	r 1,2	min. 0.3 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 17 mm
Diameter of housing abutment	D a	max. 30 mm
Radius of shaft or housing fillet	r a	max. 0.3 mm

Open the complete SKF 6002 record →

KOYO 6002 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	32 mm
Width	B	9 mm

Open the complete KOYO 6002 record →

KOYO 6002 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	32 mm
Width	B	9 mm

Open the complete KOYO 6002 2RS record →

TIMKEN 6002 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	32 mm / 1.260 in
Width (B)	B	9 mm / 0.354 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	0.3 mm / 0.012 in

Open the complete TIMKEN 6002 record →

TIMKEN 6002-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	32 mm / 1.260 in
Width (B)	B	9 mm / 0.354 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	0.3 mm / 0.012 in

Open the complete TIMKEN 6002-2RS record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6002

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6002 KOYO 6002

SKF 6002 — 49 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	15.0 mm
Outside diameter	Not separately recorded	32.0 mm
Width	Not separately recorded	9.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	5.85 kN
Basic static load rating	Not separately recorded	2.85 kN
Reference speed	Not separately recorded	50000.0 r/min
Limiting speed	Not separately recorded	32000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	0.11 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.03 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	32 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	9 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 20.5 mm
Recess diameter	D 2	≈ 28.2 mm
Chamfer dimension	r 1,2	min. 0.3 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 17 mm
Diameter of housing abutment	D a	max. 30 mm
Radius of shaft or housing fillet	r a	max. 0.3 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	5.85 kN
Basic static load rating	C 0	2.85 kN
Fatigue load limit	P u	0.12 kN
Reference speed	Not separately recorded	50000 r/min
Limiting speed	Not separately recorded	32000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	14

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	4 µm
Maximum run-out of inner ring side face to the bore	t Sd	7 µm
Maximum axial run-out of inner ring of assembled bearing	t Sia	7 µm
Range of section height at outer ring of assembled bearing	t Kea	7 µm
Perpendicularity of outer ring outside surface	t SD	4 µm
Maximum axial run-out of outer ring of assembled bearing	t Sea	8 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P5

Open SKF 6002 product record →

KOYO 6002 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	15 mm
D	Not separately recorded	32 mm
B	Not separately recorded	9 mm
R(Min.)	Not separately recorded	0.3 mm
Basic Load Ratings : Cr	Not separately recorded	7.00 kN
Basic Load Ratings : C0R	Not separately recorded	2.85 kN
Fatigue Load Limit : Cu	Not separately recorded	0.150 kN
Factor : F0	Not separately recorded	13.9
Limiting Speeds(Grease Lub.)	Not separately recorded	23000 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	27000 min-1
Da(Min.)	Not separately recorded	17 mm
Da(Max.)	Not separately recorded	30 mm
Ra(Max.)	Not separately recorded	0.3 mm
Mass(Refer.)	Not separately recorded	0.030 kg

Open KOYO 6002 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6002Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.03 kg30 g
TIMKEN6002Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
NSK6002Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	6.15 kN	2.84 kN	—	—	0.031 kg31 g
KOYO6002Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	7 kN	2.85 kN	—	23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 27000 min-1	0.03 kg30 g
NACHI6002Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	0.032 kg32 g
SKF6002-2RSHDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.0298 kg29.8 g
SKF6002-2RSH/C3Deep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	14000 rpm	0.0298 kg29.8 g
SKF6002-2RSH/C3GJNDeep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.0285 kg28.5 g
SKF6002-2RSHNRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) — Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.0322 kg32.2 g
SKF6002-2RSH/VA947SKF Food line deep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.03 kg30 g
SKF6002-2RSH/W64Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	10100 rpm	0.0303 kg30.3 g
SKF6002 2RSJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.03 kg30 g
SKF6002-2RSLDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.0285 kg28.5 g
SKF6002-2RSL/C3Deep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	—	0.0285 kg28.5 g
SKF6002-2RSLTN9/C3VT162Deep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.0284 kg28.4 g
SKF6002-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.59 kN	2.85 kN	56000 rpm	26000 rpm	0.0271 kg27.1 g
SKF6002 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.0298 kg29.8 g
SKF6002-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.031 kg31 g
SKF6002-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.031 kg31 g
SKF6002-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.0309 kg30.9 g
SKF6002-2Z/C3LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.031 kg31 g
SKF6002-2Z/C3WTDeep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.031 kg31 g
SKF6002 2ZJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.0297 kg29.7 g
SKF6002-2Z/LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.031 kg31 g
SKF6002-2ZNRDeep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) — Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	—	0.0316 kg31.6 g
SKF6002 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	26000 rpm	0.0316 kg31.6 g
SKF6002/C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.0296 kg29.6 g
SKF6002 JEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.0286 kg28.6 g
SKF6002-RSHDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.0292 kg29.2 g
SKF6002 RSJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	14000 rpm	0.0292 kg29.2 g
SKF6002-RSLDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.0288 kg28.8 g
SKF6002 TN9/C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.0277 kg27.7 g
SKF6002-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.029 kg29 g
SKF6002-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.0294 kg29.4 g
SKF6002 ZJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.85 kN	2.85 kN	50000 rpm	32000 rpm	0.0294 kg29.4 g
FAG6002-C-2BRS-TVH-L178-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.029 kg29 g
FAG6002-C-2HRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.029 kg29 g
FAG6002-C-2HRS-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.029 kg29 g
FAG6002-C-2HRS-L207>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.029 kg29 g
FAG6002-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.029 kg29 g
FAG6002-C-2Z-C2>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L069-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L069-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L069>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L138-CM>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L207>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z-L237-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-2Z>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	31500 rpm	0.029 kg29 g
FAG6002-C-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	37000 rpm	0.027 kg27 g
FAG6002-C-HRS-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.028 kg28 g
FAG6002-C-HRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	—	20300 rpm	0.027 kg27 g
FAG6002-C-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	37000 rpm	0.027 kg27 g
FAG6002-C>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	37000 rpm	0.027 kg27 g
FAG6002-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	37000 rpm	0.028 kg28 g
FAG6002-C-Z-TVH>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	37000 rpm	0.027 kg27 g
FAG6002-C-Z>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	6.3 kN	2.85 kN	23200 rpm	37000 rpm	0.027 kg27 g
FAG6002-H-2RSR-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	13100 rpm	0.033 kg33 g
FAG6002-H-2RSR>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	—	13100 rpm	0.033 kg33 g
FAG6002-H-2Z-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	21500 rpm	28500 rpm	0.033 kg33 g
FAG6002-H-2Z>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	21500 rpm	28500 rpm	0.033 kg33 g
FAG6002-H-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	21500 rpm	33500 rpm	0.031 kg31 g
FAG6002-H>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	21500 rpm	33500 rpm	0.031 kg31 g
FAG6002-H-Z-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	5.85 kN	2.85 kN	21500 rpm	28500 rpm	0.033 kg33 g
TIMKEN6002-2RSDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-2RS-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-2RS-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-2RZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-2RZ-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-RSDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-RS-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-ZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-Z-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-ZZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-ZZ-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
TIMKEN6002-ZZ-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 32 mm 1.259843 in Catalogue width (symbol unverified) 9 mm 0.354331 in	5.59 kN	2.84 kN	—	—	0.03 kg30 g
NSK6002DDUDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	6.15 kN	2.84 kN	—	—	—
NSK6002VVDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	6.15 kN	2.84 kN	—	—	—
NSK6002ZZDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	6.15 kN	2.84 kN	—	—	—
KOYO6002/1B2RDDCS11-AMAutomotive bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 11 mm 0.433071 in	—	—	—	—	0.035 kg35 g
KOYO6002 2RDDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	7 kN	2.85 kN	—	21000 rpmLimiting Speeds(Grease Lub.): 21000 min-1	0.03 kg30 g
KOYO6002 2RSDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	7 kN	2.85 kN	—	14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1	0.03 kg30 g
KOYO6002 2RUDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	7 kN	2.85 kN	—	23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1	0.03 kg30 g
KOYO6002 ZZDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Width (B) 9 mm 0.354331 in	7 kN	2.85 kN	—	23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1	0.03 kg30 g
NACHI6002-2NKE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	—
NACHI6002-2NSE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	—
NACHI6002NKE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	—
NACHI6002NSE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	—
NACHI6002ZEDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	—
NACHI6002ZZEDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 32 mm 1.259843 in Bearing width (B) 9 mm 0.354331 in	7.05 kN	2.84 kN	—	—	—

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6002	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
TIMKEN 6002	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6002	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6002	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6002-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6002-2RSH/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2RSH/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2RSHNR	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6002-2RSH/VA947	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Food grade grease
SKF 6002-2RSH/W64	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Solid Oil
SKF 6002 2RSJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2RSL	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6002-2RSL/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2RSLTN9/C3VT162	Seal on both sides	Not recorded	C3	Non-metallic	Bearing steel	Grease
SKF 6002-2RSLTN9/HC5C3WT	Seal on both sides	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	Grease
SKF 6002 2RSNRJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6002-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2Z/C3LHT23	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2Z/C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002 2ZJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002-2Z/LHT23	Shield on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6002-2ZNR	Shield on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6002 2ZNRJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6002/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6002 JEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6002-RSH	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6002 RSJEM	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6002-RSL	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6002 TN9/C3	Without	Not recorded	C3	Non-metallic	Bearing steel	None
SKF 6002-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6002-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6002 ZJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
FAG 6002-C-2BRS-TVH-L178-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	L178 — Grease (L178/customer specific)
FAG 6002-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6002-C-2HRS-L038-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6002-C-2HRS-L038>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6002-C-2HRS-L207>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6002-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6002-C-2Z-C2>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6002-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6002-C-2Z-L038-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6002-C-2Z-L038>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6002-C-2Z-L069-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6002-C-2Z-L069-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6002-C-2Z-L069>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6002-C-2Z-L138-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6002-C-2Z-L207>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6002-C-2Z-L237-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6002-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6002-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-C-HRS-C3>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-C-HRS>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-C-L038-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6002-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-C-Z-TVH>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6002-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-H-2RSR-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6002-H-2RSR>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6002-H-2Z-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6002-H-2Z>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6002-H-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-H>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6002-H-Z-C3>N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6002-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-2RS-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6002-ZZ-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6002DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6002VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6002ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6002/1B2RDDCS11-AM	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6002 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6002 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6002 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6002 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002-2NKE9	Two non-contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002-2NSE9	Two contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002NKE9	One non-contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002NSE9	One contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002ZE	One shield	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6002ZZE	Two shields	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →TIMKEN

6002-2RS-C3

Deep groove ball bearing

View full technical record →

Filter all 97 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6002 — published size and closure variants

Keep RS, 2RS, ZZ and width suffixes distinct

6002 dimensions and recorded technical data

Read the original dimensions for 6002

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6002

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6002

6002

6002

6002

6002

6002/1B2RDDCS11-AM

6002-2NKE9

6002-2NSE9

6002 2RD

6002-2RS

6002 2RS

6002-2RS-C3

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.