Find · understand · compare

3210 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3210. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

3210 dimensions and recorded technical data

The recorded 3210 base designation measures 50×90×30.2 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 32 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
KOYO3210Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	56.4 kN	52.1 kN	—	4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5700 min-1	0.76 kg760 g
SKF3210 ADouble row angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.68 kg680 g
SKF3210 A-2RS1Double row angular contact ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	—	4800 rpm	0.687 kg687 g
SKF3210 A-2RS1/C3Double row angular contact ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	—	4800 rpm	0.687 kg687 g
SKF3210 A-2RS1/MT33Double row angular contact ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 30.2 mm 1.188976 in	51 kN	42.5 kN	—	4800 rpm	0.687 kg687 g
SKF3210 A-2RS1TN9/C3MT33Double row angular contact ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 30.2 mm 1.188976 in	51 kN	42.5 kN	—	4800 rpm	0.673 kg673 g
SKF3210 A-2RS1TN9/MT33Double row angular contact ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	—	4800 rpm	0.673 kg673 g
SKF3210 A-2RS1/W64Double row angular contact ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 30.2 mm 1.188976 in	51 kN	42.5 kN	—	1700 rpm	0.687 kg687 g
SKF3210 A-2ZDouble row angular contact ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.68 kg680 g
SKF3210 A-2Z/C3Double row angular contact ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.68 kg680 g
SKF3210 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.68 kg680 g
SKF3210 A-2ZTN9/MT33Double row angular contact ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.677 kg677 g
SKF3210 A/C3Double row angular contact ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.68 kg680 g
SKF3210 ATN9Double row angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.667 kg667 g
SKF3210 ATN9/C3Double row angular contact ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 30.2 mm 1.188976 in	51 kN	42.5 kN	8000 rpm	7000 rpm	0.667 kg667 g
FAG3210-BD-XLAngular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.681 kg681 g
FAG3210-BD-XL-2HRSAngular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	—	5900 rpm	0.698 kg698 g
FAG3210-BD-XL-2HRS-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	—	5900 rpm	0.698 kg698 g
FAG3210-BD-XL-2HRS-TVHAngular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	—	5900 rpm	0.68 kg680 g
FAG3210-BD-XL-2HRS-TVH-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	—	5900 rpm	0.68 kg680 g
FAG3210-BD-XL-2HRS-TVH-L404Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	—	5900 rpm	0.68 kg680 g
FAG3210-BD-XL-2ZAngular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	5900 rpm	0.694 kg694 g
FAG3210-BD-XL-2Z-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	5900 rpm	0.694 kg694 g
FAG3210-BD-XL-2Z-TVHAngular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	5900 rpm	0.677 kg677 g
FAG3210-BD-XL-2Z-TVH-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	5900 rpm	0.677 kg677 g
FAG3210-BD-XL-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.681 kg681 g
FAG3210-BD-XL-TVHAngular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.653 kg653 g
FAG3210-BD-XL-TVH-C2Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.663 kg663 g
FAG3210-BD-XL-TVH-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.664 kg664 g
FAG3210-BD-XL-TVH-L285Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.663 kg663 g
FAG3210-BD-XL-TVH-L285-C2Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.664 kg664 g
FAG3210-BD-XL-TVH-L285-C3Angular contact ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 30.2 mm 1.188976 in	53 kN	44 kN	7600 rpm	7800 rpm	0.664 kg664 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
KOYO 3210	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 3210 A	Without	Not recorded	Not recorded	Sheet metal	Bearing steel	None
SKF 3210 A-2RS1	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3210 A-2RS1/C3	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3210 A-2RS1/MT33	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3210 A-2RS1TN9/C3MT33	Seal on both sides	Not recorded	Not recorded	Non-metallic	Bearing steel	Grease
SKF 3210 A-2RS1TN9/MT33	Seal on both sides	Not recorded	Not recorded	Non-metallic	Bearing steel	Grease
SKF 3210 A-2RS1/W64	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Solid Oil
SKF 3210 A-2Z	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3210 A-2Z/C3	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3210 A-2Z/C3MT33	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3210 A-2ZTN9/MT33	Shield on both sides	Not recorded	Not recorded	Non-metallic	Bearing steel	Grease
SKF 3210 A/C3	Without	Not recorded	Not recorded	Sheet metal	Bearing steel	None
SKF 3210 ATN9	Without	Not recorded	Not recorded	Non-metallic	Bearing steel	None
SKF 3210 ATN9/C3	Without	Not recorded	Not recorded	Non-metallic	Bearing steel	None
FAG 3210-BD-XL	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 3210-BD-XL-2HRS	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2HRS-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2HRS-TVH	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2HRS-TVH-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2HRS-TVH-L404	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	L404 — Grease (L404/customer specific)
FAG 3210-BD-XL-2Z	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2Z-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2Z-TVH	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-2Z-TVH-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3210-BD-XL-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 3210-BD-XL-TVH	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	Without — Bearing not greased
FAG 3210-BD-XL-TVH-C2	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	Without — Bearing not greased
FAG 3210-BD-XL-TVH-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	Without — Bearing not greased
FAG 3210-BD-XL-TVH-L285	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	L285 — Grease (L285/customer specific)
FAG 3210-BD-XL-TVH-L285-C2	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	L285 — Grease (L285/customer specific)
FAG 3210-BD-XL-TVH-L285-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	L285 — Grease (L285/customer specific)

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3210

Angular contact ball bearing

View full technical record →SKF