Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications15 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 3210 | |
| Bore diameter | d | 50 mm |
| Outside diameter | D | 90 mm |
| Width | B | 30.2 mm |
| Basic dynamic load rating | C | 53 kN |
| Basic static load rating | C0 | 44 kN |
| Fatigue load limit | Pu | 3.05 kN |
| Limiting speed | nG | 5900 r/min |
| Mass | ≈m | 0.68 kg |
| Precision class | P6 — Class 6 (ISO 492:2023) | |
| Sealing | 2HRS — Contact seal on both sides | |
| Cage | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | |
| Lubricant | GA13 — Ball bearing and insert bearing grease | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 3Derived from ISO P6; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | Bearing without filling slot |
| Changed internal design | D | |
| Type of Seal | 2HRS | Contact seal on both sides |
| Cage | TVH | Solid cage made of glass-fiber reinforced polyamide PA66 |
| Tolerance class | P6 | Class 6 (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | GA13 | Ball bearing and insert bearing grease |
| Axial internal clearance | CN | Group N (CN) |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 50 mm1.969 in |
| Outside diameter | D | 90 mm3.543 in |
| Width | B | 30.2 mm1.189 in |
| Basic dynamic load rating, radial | Cr | 53,000 N11,915.468 lbf |
| Basic static load rating, radial | C0r | 44,000 N9,892.086 lbf |
| Fatigue load limit, radial | Cur | 3,050 N685.701 lbf |
| Limiting speed | nG | 5,900 1/min |
| Mass | ≈m | 0.68 kg1.499 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 57 mm2.244 in |
| Maximum diameter of housing shoulder | Da max | 83 mm3.268 in |
| Maximum fillet radius | ra max | 1 mm0.039 in |
Dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm0.043 in |
| Shoulder diameter outer ring | D1 | 80.1 mm3.154 in |
| Caliber diameter outer ring | D2 | 82.91 mm3.264 in |
| Shoulder diameter inner ring | d1 | 64.9 mm2.555 in |
| Caliber diamter inner ring | d2 | 62.83 mm2.474 in |
| Distance between the apexes of the pressure cones | a | 53.2 mm2.094 in |
| Contact angle | α | 30 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 360592 | |
| Brand | FAG | |
| Base Type | 3210 | |
| Old Designation | ["3210-BD-2HRS-TVH","3210-B-2RSR-TVH"] | |
| X Life Marking | XL | |
| SAP material number | 0624089170000 | |
| Base product | 2305080302 | |
| Bearing X designation | 3210-BD-XL-2HRS-TVH | |
| Mounting Manager ID | 3210-BD-XL-2HRS-TVH | |
| Grease application ID | 3210-BD-XL-2HRS-TVH |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 32..-BD-XL-2HRS-TVH, double row, X-life, seals, plastic cage | |
| Short Description | Angular contact ball bearing |
Technical Data19 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 50 mm | |
| Outside Diameter (D) | 90 mm | |
| Width (B) | 30.2 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 53,000 N | |
| Basic Static Load Rating, Radial (C0R) | 44,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 5,900 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Caliber Diameter Outer Ring (D2) | 82.91 mm | |
| Fatigue Load Limit, Radial (Cur) | 3,050 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 57 mm | |
| Shoulder Diameter Inner Ring (D1) | 64.9 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 83 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | |
| Caliber Diameter Inner Ring (D1) | 62.83 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 80.1 mm | |
| Contact Angle (Α) | 30 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 53.2 mm |
