32040 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32040. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32040 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 15 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32040T152 X/DB31C356Matched tapered roller bearings arranged back-to-back |
| 1372 kN | 2750 kN | 1100 rpm | 1900 rpm | 39.7 kg39700 g |
| SKF32040T154.5 X/DB11C170Matched tapered roller bearings arranged back-to-back |
| 1372 kN | 2750 kN | 1100 rpm | 1900 rpm | 39.7 kg39700 g |
| SKF32040T155 X/DBC560Matched tapered roller bearings arranged back-to-back |
| 1372 kN | 2750 kN | 1100 rpm | 1900 rpm | 39.8 kg39800 g |
| SKF32040 XSingle row tapered roller bearing |
| 800 kN | 1370 kN | 1400 rpm | 1900 rpm | 18.6 kg18600 g |
| SKF32040 X/DFMatched tapered roller bearings arranged face-to-face |
| 1372 kN | 2750 kN | 1100 rpm | 1900 rpm | 39 kg39000 g |
| SKF32040 X/DFC230Matched tapered roller bearings arranged face-to-face |
| 1280 kN | 2750 kN | 1100 rpm | 1900 rpm | 39 kg39000 g |
| SKF32040 X/DFC420Matched tapered roller bearings arranged face-to-face |
| 1372 kN | 2750 kN | 1100 rpm | 1900 rpm | 39 kg39000 g |
| FAG32040-XTapered roller bearing |
| 760 kN | 1370 kN | 1290 rpm | 2090 rpm | 19 kg19000 g |
| FAG32040-X>ATapered roller bearing |
| 760 kN | 1370 kN | 1290 rpm | 2090 rpm | 18.92 kg18920 g |
| FAG32040-X-XLTapered roller bearing |
| 950 kN | 1380 kN | 1280 rpm | 2500 rpm | 18.58 kg18580 g |
| FAG32040-X-XL>ATapered roller bearing |
| 950 kN | 1380 kN | 1280 rpm | 2500 rpm | 18.92 kg18920 g |
| FAG32040-X-XL-DF-A0-40Tapered roller bearing set |
| 1620 kN | 2750 kN | 1060 rpm | 2500 rpm | 38.5 kg38500 g |
| FAG32040-X-XL-P5Tapered roller bearing |
| 950 kN | 1380 kN | 1280 rpm | 2500 rpm | 18.7 kg18700 g |
| TIMKEN32040XTapered roller bearing |
| 847 kN | 1520 kN | — | — | 18.74 kg18740 g |
| KOYO32040JRTapered roller bearing |
| 949 kN | 1340 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 19.1 kg19100 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32040T152 X/DB31C356 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32040T154.5 X/DB11C170 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32040T155 X/DBC560 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32040 X | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32040 X/DF | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32040 X/DFC230 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32040 X/DFC420 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32040-X | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32040-X>A | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32040-X-XL | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32040-X-XL>A | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32040-X-XL-DF-A0-40 | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32040-X-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32040X | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32040JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32040JR
Tapered roller bearing
View full technical record →SKF32040T152 X/DB31C356
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32040T154.5 X/DB11C170
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32040T155 X/DBC560
Matched tapered roller bearings arranged back-to-back
View full technical record →FAG32040-X
Tapered roller bearing
View full technical record →TIMKEN32040X
Tapered roller bearing
View full technical record →SKF32040 X
Single row tapered roller bearing
View full technical record →FAG32040-X>A
Tapered roller bearing
View full technical record →SKF32040 X/DF
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32040 X/DFC230
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32040 X/DFC420
Matched tapered roller bearings arranged face-to-face
View full technical record →FAG32040-X-XL
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.