Find · understand · compare
23176 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23176. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23176 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 52 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23176-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 4561 kN | 7100 kN | — | 300 rpm | 230 kg230000 g |
| SKF23176 CA/C08W507Spherical roller bearing with relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 230 kg230000 g |
| SKF23176 CA/C3W33Spherical roller bearing with relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 230 kg230000 g |
| SKF23176 CAK/C082W507Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/C084S2W33XSpherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/C084W33Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 225 kg225000 g |
| SKF23176 CAK/C084W507Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CAK/W33Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 223 kg223000 g |
| SKF23176 CA/W33Spherical roller bearing with relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 230 kg230000 g |
| SKF23176 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 221 kg221000 g |
| SKF23176 CC/W33Spherical roller bearing with relubrication features |
| 4561 kN | 7100 kN | 560 rpm | 1000 rpm | 230 kg230000 g |
| FAG23176-BEA-XL-2RSR-MB1Spherical Roller Bearing |
| 4750 kN | 7600 kN | — | 248 rpm | 234 kg234000 g |
| FAG23176-BEA-XL-K-2RSR-MB1Spherical Roller Bearing |
| 4750 kN | 7600 kN | — | 248 rpm | 227 kg227000 g |
| FAG23176-BEA-XL-K-MB1Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 221 kg221000 g |
| FAG23176-BEA-XL-K-MB1-C2Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 221 kg221000 g |
| FAG23176-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 221 kg221000 g |
| FAG23176-BEA-XL-K-MB1-C4Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 221 kg221000 g |
| FAG23176-BEA-XL-K-MB1-J30PC-C3Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 221.5 kg221500 g |
| FAG23176-BEA-XL-MB1Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 228 kg228000 g |
| FAG23176-BEA-XL-MB1-C3Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 228 kg228000 g |
| FAG23176-BEA-XL-MB1-C5Spherical Roller Bearing |
| 4700 kN | 7600 kN | 530 rpm | 990 rpm | 228 kg228000 g |
| TIMKEN23176KYMBW25W507C08Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW25W507C08C2Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW507C08Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.02 kg225020 g |
| TIMKEN23176KYMBW507C08C2Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.02 kg225020 g |
| TIMKEN23176KYMBW507C08C3Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.02 kg225020 g |
| TIMKEN23176KYMBW507C08C4Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.02 kg225020 g |
| TIMKEN23176KYMBW833W45ASpherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW833W45AC2Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW833W45AC3Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW833W45AC8Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW906ASpherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW906AC3Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176KYMBW906AC4Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 225.03 kg225030 g |
| TIMKEN23176YMBW507C08Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 232.58 kg232580 g |
| TIMKEN23176YMBW507C08C3Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 232.58 kg232580 g |
| TIMKEN23176YMBW507C08C4Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 232.58 kg232580 g |
| TIMKEN23176YMBW507C08C5Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 232.58 kg232580 g |
| TIMKEN23176YMDW33W40W45BC2Spherical roller bearing |
| 4490 kN | 7580 kN | — | — | 232.16 kg232160 g |
| NSK23176CAME4Spherical roller bearing |
| 4000 kN | 7600 kN | — | — | 229 kg229000 g |
| NSK23176CAMKE4Spherical roller bearing |
| 4000 kN | 7600 kN | — | — | — |
| KOYO23176RSpherical roller bearing |
| 4520 kN | 7320 kN | — | 420 rpmLimiting Speeds(Grease Lub.): 420 min-1Limiting Speeds(Oil Lub.): 560 min-1 | 240 kg240000 g |
| KOYO23176RHASpherical roller bearing |
| 5030 kN | 7700 kN | — | 420 rpmLimiting Speeds(Grease Lub.): 420 min-1Limiting Speeds(Oil Lub.): 560 min-1 | 224 kg224000 g |
| KOYO23176RHAK+AH3176Spherical roller bearing |
| 5030 kN | 7700 kN | — | 420 rpmLimiting Speeds(Grease Lub.): 420 min-1Limiting Speeds(Oil Lub.): 560 min-1 | 253 kg253000 g |
| KOYO23176RHAK+H3176Spherical roller bearing |
| 5030 kN | 7700 kN | — | 420 rpmLimiting Speeds(Grease Lub.): 420 min-1Limiting Speeds(Oil Lub.): 560 min-1 | 282 kg282000 g |
| KOYO23176RK+AH3176Spherical roller bearing |
| 4520 kN | 7320 kN | — | 420 rpmLimiting Speeds(Grease Lub.): 420 min-1Limiting Speeds(Oil Lub.): 560 min-1 | 269 kg269000 g |
| KOYO23176RK+H3176Spherical roller bearing |
| 4520 kN | 7320 kN | — | 420 rpmLimiting Speeds(Grease Lub.): 420 min-1Limiting Speeds(Oil Lub.): 560 min-1 | 298 kg298000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23176-2CS5K/VT143 | Seal on both sides | Normal | CN | Machined brass | Not recorded | Grease |
| SKF 23176 CA/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23176 CA/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C082W507 | Without | Not recorded | C2 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C084S2W33X | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C084W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C084W507 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23176 CAK/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23176 CAK/C4W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23176 CAK/HA3C4W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23176 CAK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23176 CA/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23176 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23176 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23176-BEA-XL-2RSR-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-K-2RSR-MB1 | Not recorded | Not recorded | Not recorded | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-K-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-K-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-K-MB1-J30PC-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23176-BEA-XL-MB1-C5 | Not recorded | Not recorded | Not recorded | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW25W507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW25W507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW833W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW833W45AC2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW833W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW833W45AC8 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW906A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW906AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176KYMBW906AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176YMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176YMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176YMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176YMBW507C08C5 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23176YMDW33W40W45BC2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23176CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23176CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23176R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23176RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23176RHAK+AH3176 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23176RHAK+H3176 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23176RK+AH3176 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23176RK+H3176 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23176-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →FAG23176-BEA-XL-2RSR-MB1
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-K-2RSR-MB1
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-K-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-K-MB1-C4
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-K-MB1-J30PC-C3
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23176-BEA-XL-MB1-C5
Spherical Roller Bearing
View full technical record →SKF23176 CA/C08W507
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.