Find · understand · compare
22315 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22315. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22315 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 47 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22315 ESpherical roller bearing with relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.24 kg5240 g |
| SKF22315 E/C2Spherical roller bearing with relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.24 kg5240 g |
| SKF22315 E/C3Spherical roller bearing with relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.24 kg5240 g |
| SKF22315 E/C4Spherical roller bearing with relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.24 kg5240 g |
| SKF22315 EJA/VA405Spherical roller bearing for vibratory applications, with relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.35 kg5350 g |
| SKF22315 EKSpherical roller bearing with tapered bore and relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.15 kg5150 g |
| SKF22315 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.15 kg5150 g |
| SKF22315 EKJA/VA405Spherical roller bearing for vibratory applications, with tapered bore and relubrication features |
| 462 kN | 475 kN | 3200 rpm | 4300 rpm | 5.24 kg5240 g |
| FAG22315-E1A-XL-K-MSpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.117 kg5117 g |
| FAG22315-E1A-XL-K-M-C3Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.12 kg5120 g |
| FAG22315-E1A-XL-K-M-T41ASpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.41 kg5410 g |
| FAG22315-E1A-XL-MSpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.12 kg5120 g |
| FAG22315-E1A-XL-MA-T41ASpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.417 kg5417 g |
| FAG22315-E1A-XL-M-C3Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.12 kg5120 g |
| FAG22315-E1A-XL-M-C4Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.12 kg5120 g |
| FAG22315-E1A-XL-M-T41ASpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.226 kg5226 g |
| FAG22315-E1-XLSpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.286 kg5286 g |
| FAG22315-E1-XL-C2Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.253 kg5253 g |
| FAG22315-E1-XL-C3Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.286 kg5286 g |
| FAG22315-E1-XL-C4Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.257 kg5257 g |
| FAG22315-E1-XL-H40Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.322 kg5322 g |
| FAG22315-E1-XL-KSpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.174 kg5174 g |
| FAG22315-E1-XL-K-C3Spherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.144 kg5144 g |
| FAG22315-E1-XL-K-T41ASpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.142 kg5142 g |
| FAG22315-E1-XL-T41ASpherical Roller Bearing |
| 445 kN | 450 kN | 3550 rpm | 4500 rpm | 5.255 kg5255 g |
| TIMKEN22315EJW33Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.17 kg5170 g |
| TIMKEN22315EJW33C2Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.17 kg5170 g |
| TIMKEN22315EJW33C3Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.17 kg5170 g |
| TIMKEN22315EJW33C4Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.17 kg5170 g |
| TIMKEN22315EJW33W800C4Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.16 kg5160 g |
| TIMKEN22315EJW841Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.21 kg5210 g |
| TIMKEN22315EMW33Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.31 kg5310 g |
| TIMKEN22315EMW33C3Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.31 kg5310 g |
| TIMKEN22315EMW33W800Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.31 kg5310 g |
| TIMKEN22315EMW33W800C4Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.31 kg5310 g |
| TIMKEN22315EMW33W800W25C4Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.3 kg5300 g |
| TIMKEN22315EMW800C4Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.36 kg5360 g |
| TIMKEN22315KEJW33Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.05 kg5050 g |
| TIMKEN22315KEJW33C3Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.05 kg5050 g |
| TIMKEN22315KEMW33Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.19 kg5190 g |
| TIMKEN22315KEMW33C3Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.19 kg5190 g |
| TIMKEN22315KEMW33W800C4Spherical roller bearing |
| 450 kN | 478 kN | — | — | 5.19 kg5190 g |
| NSK22315EAE4Spherical roller bearing |
| 485 kN | 505 kN | — | — | 5.26 kg5260 g |
| NSK22315EAKE4Spherical roller bearing |
| 485 kN | 505 kN | — | — | — |
| KOYO22315RZSpherical roller bearing |
| 492 kN | 473 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 5.45 kg5450 g |
| KOYO22315RZK+AHX2315Spherical roller bearing |
| 492 kN | 473 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 5.87 kg5870 g |
| KOYO22315RZK+H2315XSpherical roller bearing |
| 492 kN | 473 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 6.44 kg6440 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22315 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22315 E/C2 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22315 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22315 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22315 EJA/VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22315 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22315 EK/C3 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 22315 EKJA/VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| FAG 22315-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-K-M-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-MA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1A-XL-M-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22315-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-K-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22315-E1-XL-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22315EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315EJW33W800C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315EMW33W800 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315EMW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315EMW33W800W25C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315EMW800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22315KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22315KEMW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22315EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22315EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22315RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22315RZK+AHX2315 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22315RZK+H2315X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22315 E
Spherical roller bearing with relubrication features
View full technical record →FAG22315-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-K-M-T41A
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-M
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-MA-T41A
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-M-C3
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-M-C4
Spherical Roller Bearing
View full technical record →FAG22315-E1A-XL-M-T41A
Spherical Roller Bearing
View full technical record →FAG22315-E1-XL
Spherical Roller Bearing
View full technical record →FAG22315-E1-XL-C2
Spherical Roller Bearing
View full technical record →FAG22315-E1-XL-C3
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.