209 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 209. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
209 dimensions and recorded technical data
The recorded 209 base designation measures 45×85×19 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 25 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF209Deep groove ball bearing with filling slots |
| 35.2 kN | 30 kN | 14000 rpm | 8500 rpm | 0.439 kg439 g |
| SKF209-2ZDeep groove ball bearing with filling slots and integral sealing |
| 35.2 kN | 30 kN | 14000 rpm | 6800 rpm | 0.458 kg458 g |
| SKF209/C3Deep groove ball bearing with filling slots |
| 35.2 kN | 30 kN | 14000 rpm | 8500 rpm | 0.439 kg439 g |
| SKF209 NRDeep groove ball bearing with filling slots and snap ring |
| 35.2 kN | 30 kN | 14000 rpm | 8500 rpm | 0.435 kg435 g |
| SKF209-ZDeep groove ball bearing with filling slots and integral sealing |
| 35.2 kN | 30 kN | 14000 rpm | 8500 rpm | 0.447 kg447 g |
| SKF209-ZNRDeep groove ball bearing with filling slots and integral sealing |
| 35.2 kN | 30 kN | 14000 rpm | 8500 rpm | 0.435 kg435 g |
| INA209-XL-KRRDeep groove ball bearing |
| 34.5 kN | 20.4 kN | — | — | 0.54 kg540 g |
| INA209-XL-KRR-C3Deep groove ball bearing |
| 32.5 kN | 20.4 kN | — | — | 0.54 kg540 g |
| INA209-XL-NPP-BSelf-aligning deep groove ball bearings |
| 34.5 kN | 20.4 kN | — | — | 0.37 kg370 g |
| INA209-XL-NPP-B-C3Self-aligning deep groove ball bearings |
| 34.5 kN | 20.4 kN | — | — | 0.37 kg370 g |
| TIMKEN209KDDFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209KDFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209KDGFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209KFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209KGFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209KLDDeep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.51 kg510 g |
| TIMKEN209KLLGDeep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.51 kg510 g |
| TIMKEN209KRR3Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.58 kg580 g |
| TIMKEN209KRR3FS892Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.58 kg580 g |
| TIMKEN209PFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209PPFS50000Deep groove ball bearing |
| 32.7 kN | 20.5 kN | — | — | 0.43 kg430 g |
| TIMKEN209WDeep groove ball bearing |
| 43.9 kN | 31.8 kN | — | — | 0.46 kg460 g |
| TIMKEN209WDDeep groove ball bearing |
| 43.9 kN | 31.8 kN | — | — | 0.46 kg460 g |
| TIMKEN209WDDNDeep groove ball bearing |
| 43.9 kN | 31.8 kN | — | — | 0.46 kg460 g |
| TIMKEN209WGDeep groove ball bearing |
| 43.9 kN | 31.8 kN | — | — | 0.46 kg460 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 209 | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 209-2Z | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 209/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 209 NR | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 209-Z | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 209-ZNR | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| INA 209-XL-KRR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 209-XL-KRR-C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 209-XL-NPP-B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 209-XL-NPP-B-C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 209KDDFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KDFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KDGFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KFS50000 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KGFS50000 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KLD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KLLG | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KRR3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209KRR3FS892 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209PFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209PPFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209W | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209WD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209WDDN | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 209WG | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
209
Deep groove ball bearing with filling slots
View full technical record →SKF209-2Z
Deep groove ball bearing with filling slots and integral sealing
View full technical record →SKF209/C3
Deep groove ball bearing with filling slots
View full technical record →TIMKEN209KDDFS50000
Deep groove ball bearing
View full technical record →TIMKEN209KDFS50000
Deep groove ball bearing
View full technical record →TIMKEN209KDGFS50000
Deep groove ball bearing
View full technical record →TIMKEN209KFS50000
Deep groove ball bearing
View full technical record →TIMKEN209KGFS50000
Deep groove ball bearing
View full technical record →TIMKEN209KLD
Deep groove ball bearing
View full technical record →TIMKEN209KLLG
Deep groove ball bearing
View full technical record →TIMKEN209KRR3
Deep groove ball bearing
View full technical record →TIMKEN209KRR3FS892
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.