Find · understand · compare
207 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 207. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
207 dimensions and recorded technical data
The recorded 207 base designation measures 35×72×17 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 26 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF207Deep groove ball bearing with filling slots |
| 27.5 kN | 22 kN | 17000 rpm | 10000 rpm | 0.304 kg304 g |
| SKF207-2ZDeep groove ball bearing with filling slots and integral sealing |
| 27.5 kN | 22 kN | 17000 rpm | 8000 rpm | 0.319 kg319 g |
| SKF207-2ZNRDeep groove ball bearing with filling slots and integral sealing |
| 27.5 kN | 22 kN | 17000 rpm | 8000 rpm | 0.318 kg318 g |
| SKF207 NRDeep groove ball bearing with filling slots and snap ring |
| 27.5 kN | 22 kN | 17000 rpm | 10000 rpm | 0.304 kg304 g |
| SKF207-ZDeep groove ball bearing with filling slots and integral sealing |
| 27.5 kN | 22 kN | 17000 rpm | 10000 rpm | 0.309 kg309 g |
| SKF207-ZNRDeep groove ball bearing with filling slots and integral sealing |
| 27.5 kN | 22 kN | 17000 rpm | 10000 rpm | 0.308 kg308 g |
| INA207-XL-KRR-AH03Deep groove ball bearing |
| 25.5 kN | 15.3 kN | — | — | 0.35 kg350 g |
| INA207-XL-NPP-BSelf-aligning deep groove ball bearings |
| 27.5 kN | 15.3 kN | — | — | 0.27 kg270 g |
| INA207-XL-NPP-B-C3Self-aligning deep groove ball bearings |
| 27.5 kN | 15.3 kN | — | — | 0.27 kg270 g |
| TIMKEN207KDDFS50000Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207KDFS50000Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207KFS50000Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207KLDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.32 kg320 g |
| TIMKEN207KLDDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.31 kg310 g |
| TIMKEN207KLLDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.32 kg320 g |
| TIMKEN207KRRDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.4 kg400 g |
| TIMKEN207KRR12Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.38 kg380 g |
| TIMKEN207KRRB17Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207KRRB17FS615Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207KTTDeep groove ball bearing |
| 28.9 kN | 17.1 kN | — | — | 0.36 kg360 g |
| TIMKEN207KYYDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207PFS50000Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207PPFS50000Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207PPGFS50000Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN207RR3Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.34 kg340 g |
| TIMKEN207WDeep groove ball bearing |
| 35 kN | 22.8 kN | — | — | 0.31 kg310 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 207 | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 207-2Z | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 207-2ZNR | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 207 NR | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 207-Z | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 207-ZNR | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| INA 207-XL-KRR-AH03 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 207-XL-NPP-B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 207-XL-NPP-B-C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 207KDDFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KDFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KFS50000 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KLD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KLL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KRR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KRR12 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KRRB17 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KRRB17FS615 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KTT | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207KYY | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207PFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207PPFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207PPGFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 207RR3 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 207W | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
207
Deep groove ball bearing with filling slots
View full technical record →SKF207-2Z
Deep groove ball bearing with filling slots and integral sealing
View full technical record →SKF207-2ZNR
Deep groove ball bearing with filling slots and integral sealing
View full technical record →TIMKEN207KDDFS50000
Deep groove ball bearing
View full technical record →TIMKEN207KDFS50000
Deep groove ball bearing
View full technical record →TIMKEN207KFS50000
Deep groove ball bearing
View full technical record →TIMKEN207KL
Deep groove ball bearing
View full technical record →TIMKEN207KLD
Deep groove ball bearing
View full technical record →TIMKEN207KLL
Deep groove ball bearing
View full technical record →TIMKEN207KRR
Deep groove ball bearing
View full technical record →TIMKEN207KRR12
Deep groove ball bearing
View full technical record →TIMKEN207KRRB17
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.